Re: [PATCH] gpio: Add support for Intel SoC PMIC (Crystal Cove)

From: Alexandre Courbot
Date: Sat May 17 2014 - 10:38:20 EST


On Thu, May 15, 2014 at 12:44 AM, Zhu, Lejun <lejun.zhu@xxxxxxxxxxxxxxx> wrote:
> Devices based on Intel SoC products such as Baytrail have a Power
> Management IC. In the PMIC there are subsystems for voltage regulation,
> A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is called
> Crystal Cove.
>
> This patch adds support for the GPIO function in Crystal Cove.
>
> Signed-off-by: Yang, Bin <bin.yang@xxxxxxxxx>
> Signed-off-by: Zhu, Lejun <lejun.zhu@xxxxxxxxxxxxxxx>
> ---
> drivers/gpio/Kconfig | 9 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-crystalcove.c | 323 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 333 insertions(+)
> create mode 100644 drivers/gpio/gpio-crystalcove.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index a86c49a..95bb5a0 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -440,6 +440,15 @@ config GPIO_ARIZONA
> help
> Support for GPIOs on Wolfson Arizona class devices.
>
> +config GPIO_INTEL_SOC_PMIC
> + bool "GPIO on Intel SoC PMIC"
> + depends on INTEL_SOC_PMIC
> + help
> + Support for GPIO pins on Intel SoC PMIC, such as Crystal
> + Cove.
> + Say Y if you have a tablet with Intel SoC (e.g. Baytrail)
> + inside.
> +
> config GPIO_LP3943
> tristate "TI/National Semiconductor LP3943 GPIO expander"
> depends on MFD_LP3943
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 6309aff..5380608 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
> obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
> obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
> obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
> +obj-$(CONFIG_GPIO_INTEL_SOC_PMIC) += gpio-crystalcove.o
> obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
> obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
> obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
> diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
> new file mode 100644
> index 0000000..974f9b8
> --- /dev/null
> +++ b/drivers/gpio/gpio-crystalcove.c
> @@ -0,0 +1,323 @@
> +/*
> + * gpio-crystalcove.c - Intel Crystal Cove GPIO Driver
> + *
> + * Copyright (C) 2012, 2014 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Author: Yang, Bin <bin.yang@xxxxxxxxx>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +#include <linux/sched.h>
> +#include <linux/mfd/intel_soc_pmic.h>
> +#include <linux/gpio.h>
> +
> +#define NUM_GPIO 16
> +
> +#define UPDATE_TYPE (1 << 0)
> +#define UPDATE_MASK (1 << 1)
> +
> +#define GPIO0IRQ 0x0b
> +#define GPIO1IRQ 0x0c
> +#define MGPIO0IRQS0 0x19
> +#define MGPIO1IRQS0 0x1a
> +#define MGPIO0IRQSX 0x1b
> +#define MGPIO1IRQSX 0x1c
> +#define GPIO0P0CTLO 0x2b
> +#define GPIO0P0CTLI 0x33
> +#define GPIO1P0CTLO 0x3b
> +#define GPIO1P0CTLI 0x43
> +
> +#define CTLI_INTCNT_NE (1 << 1)
> +#define CTLI_INTCNT_PE (2 << 1)
> +#define CTLI_INTCNT_BE (3 << 1)
> +
> +#define CTLO_DIR_OUT (1 << 5)
> +#define CTLO_DRV_CMOS (0 << 4)
> +#define CTLO_DRV_OD (1 << 4)
> +#define CTLO_DRV_REN (1 << 3)
> +#define CTLO_RVAL_2KDW (0)
> +#define CTLO_RVAL_2KUP (1 << 1)
> +#define CTLO_RVAL_50KDW (2 << 1)
> +#define CTLO_RVAL_50KUP (3 << 1)
> +
> +#define CTLO_INPUT_DEF (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
> +#define CTLO_OUTPUT_DEF (CTLO_DIR_OUT | CTLO_INPUT_DEF)
> +
> +struct crystalcove_gpio {
> + struct mutex buslock; /* irq_bus_lock */
> + struct gpio_chip chip;
> + int irq;
> + int irq_base;
> + int update;
> + int trigger_type;
> + int irq_mask;
> +};
> +static struct crystalcove_gpio gpio_info;
> +
> +static void __crystalcove_irq_mask(int gpio, int mask)
> +{
> + u8 mirqs0 = gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0;
> + int offset = gpio < 8 ? gpio : gpio - 8;
> +
> + if (mask)
> + intel_soc_pmic_setb(mirqs0, 1 << offset);
> + else
> + intel_soc_pmic_clearb(mirqs0, 1 << offset);
> +}
> +
> +static void __crystalcove_irq_type(int gpio, int type)
> +{
> + u8 ctli = gpio < 8 ? GPIO0P0CTLI + gpio : GPIO1P0CTLI + (gpio - 8);

Not a big comment, but wouldn't it be safer to factorize this logic
(which is repeated in many places) into some macro? e.g. something
like:

#define GPIOP0CTL(gpio, dir) ((gpio < 8 ? GPIO0P0CTL ## dir :
GPIO1P0CTL ## dir) + (gpio & ~0x8))

...

u8 ctli = GPIOP0CTL(gpio, I);

Feel free to come with a better macro (or to ignore that comment
altogether if you think it makes the code less readable), but I think
it would be less error-prone if you did not have to copy-paste that
code all over the place.


> +
> + type &= IRQ_TYPE_EDGE_BOTH;
> + intel_soc_pmic_clearb(ctli, CTLI_INTCNT_BE);
> +
> + if (type == IRQ_TYPE_EDGE_BOTH)
> + intel_soc_pmic_setb(ctli, CTLI_INTCNT_BE);
> + else if (type == IRQ_TYPE_EDGE_RISING)
> + intel_soc_pmic_setb(ctli, CTLI_INTCNT_PE);
> + else if (type & IRQ_TYPE_EDGE_FALLING)
> + intel_soc_pmic_setb(ctli, CTLI_INTCNT_NE);
> +}
> +
> +static int crystalcove_gpio_direction_input(struct gpio_chip *chip,
> + unsigned gpio)
> +{
> + u8 ctlo = gpio < 8 ? GPIO0P0CTLO + gpio : GPIO1P0CTLO + (gpio - 8);
> +
> + intel_soc_pmic_writeb(ctlo, CTLO_INPUT_DEF);
> + return 0;
> +}
> +
> +static int crystalcove_gpio_direction_output(struct gpio_chip *chip,
> + unsigned gpio, int value)
> +{
> + u8 ctlo = gpio < 8 ? GPIO0P0CTLO + gpio : GPIO1P0CTLO + (gpio - 8);
> +
> + intel_soc_pmic_writeb(ctlo, CTLO_OUTPUT_DEF | value);
> + return 0;
> +}
> +
> +static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned gpio)
> +{
> + u8 ctli = gpio < 8 ? GPIO0P0CTLI + gpio : GPIO1P0CTLI + (gpio - 8);
> +
> + return intel_soc_pmic_readb(ctli) & 0x1;
> +}
> +
> +static void crystalcove_gpio_set(struct gpio_chip *chip,
> + unsigned gpio, int value)
> +{
> + u8 ctlo = gpio < 8 ? GPIO0P0CTLO + gpio : GPIO1P0CTLO + (gpio - 8);
> +
> + if (value)
> + intel_soc_pmic_setb(ctlo, 1);
> + else
> + intel_soc_pmic_clearb(ctlo, 1);
> +}
> +
> +static int crystalcove_irq_type(struct irq_data *data, unsigned type)
> +{
> + struct crystalcove_gpio *cg = irq_data_get_irq_chip_data(data);
> +
> + cg->trigger_type = type;
> + cg->update |= UPDATE_TYPE;
> +
> + return 0;
> +}
> +
> +static int crystalcove_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
> +{
> + struct crystalcove_gpio *cg =
> + container_of(chip, struct crystalcove_gpio, chip);
> +
> + return cg->irq_base + gpio;
> +}
> +
> +static void crystalcove_bus_lock(struct irq_data *data)
> +{
> + struct crystalcove_gpio *cg = irq_data_get_irq_chip_data(data);
> +
> + mutex_lock(&cg->buslock);
> +}
> +
> +static void crystalcove_bus_sync_unlock(struct irq_data *data)
> +{
> + struct crystalcove_gpio *cg = irq_data_get_irq_chip_data(data);
> + int gpio = data->irq - cg->irq_base;
> +
> + if (cg->update & UPDATE_TYPE)
> + __crystalcove_irq_type(gpio, cg->trigger_type);
> + if (cg->update & UPDATE_MASK)
> + __crystalcove_irq_mask(gpio, cg->irq_mask);
> + cg->update = 0;
> +
> + mutex_unlock(&cg->buslock);
> +}
> +
> +static void crystalcove_irq_unmask(struct irq_data *data)
> +{
> + struct crystalcove_gpio *cg = irq_data_get_irq_chip_data(data);
> +
> + cg->irq_mask = 0;
> + cg->update |= UPDATE_MASK;
> +}
> +
> +static void crystalcove_irq_mask(struct irq_data *data)
> +{
> + struct crystalcove_gpio *cg = irq_data_get_irq_chip_data(data);
> +
> + cg->irq_mask = 1;
> + cg->update |= UPDATE_MASK;
> +}
> +
> +static struct irq_chip crystalcove_irqchip = {
> + .name = "PMIC-GPIO",
> + .irq_mask = crystalcove_irq_mask,
> + .irq_unmask = crystalcove_irq_unmask,
> + .irq_set_type = crystalcove_irq_type,
> + .irq_bus_lock = crystalcove_bus_lock,
> + .irq_bus_sync_unlock = crystalcove_bus_sync_unlock,
> +};
> +
> +static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
> +{
> + struct crystalcove_gpio *cg = data;
> + int pending;
> + int gpio;
> +
> + pending = intel_soc_pmic_readb(GPIO0IRQ) & 0xff;
> + pending |= (intel_soc_pmic_readb(GPIO1IRQ) & 0xff) << 8;
> + intel_soc_pmic_writeb(GPIO0IRQ, pending & 0xff);
> + intel_soc_pmic_writeb(GPIO1IRQ, (pending >> 8) & 0xff);
> +
> + local_irq_disable();
> + for (gpio = 0; gpio < cg->chip.ngpio; gpio++)
> + if (pending & (1 << gpio))
> + generic_handle_irq(cg->irq_base + gpio);
> + local_irq_enable();
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void crystalcove_gpio_dbg_show(struct seq_file *s,
> + struct gpio_chip *chip)
> +{
> + struct crystalcove_gpio *cg =
> + container_of(chip, struct crystalcove_gpio, chip);
> + int gpio, offset;
> + u8 ctlo, ctli, mirqs0, mirqsx, irq;
> +
> + for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
> + offset = gpio < 8 ? gpio : gpio - 8;
> + ctlo = intel_soc_pmic_readb(
> + (gpio < 8 ? GPIO0P0CTLO : GPIO1P0CTLO) + offset);
> + ctli = intel_soc_pmic_readb(
> + (gpio < 8 ? GPIO0P0CTLI : GPIO1P0CTLI) + offset);
> + mirqs0 = intel_soc_pmic_readb(
> + gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0);
> + mirqsx = intel_soc_pmic_readb(
> + gpio < 8 ? MGPIO0IRQSX : MGPIO1IRQSX);
> + irq = intel_soc_pmic_readb(
> + gpio < 8 ? GPIO0IRQ : GPIO1IRQ);
> + seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",
> + gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
> + ctli & 0x1 ? "hi" : "lo",
> + ctli & CTLI_INTCNT_NE ? "fall" : " ",
> + ctli & CTLI_INTCNT_PE ? "rise" : " ",
> + ctlo,
> + mirqs0 & (1 << offset) ? "s0 mask " : "s0 unmask",
> + mirqsx & (1 << offset) ? "sx mask " : "sx unmask",
> + irq & (1 << offset) ? "pending" : " ");
> + }
> +}
> +
> +static int crystalcove_gpio_probe(struct platform_device *pdev)
> +{
> + int irq = platform_get_irq(pdev, 0);
> + struct crystalcove_gpio *cg = &gpio_info;
> + int retval;
> + int i;
> + struct device *dev = intel_soc_pmic_dev();
> +
> + mutex_init(&cg->buslock);
> + cg->chip.label = "intel_crystalcove";
> + cg->chip.direction_input = crystalcove_gpio_direction_input;
> + cg->chip.direction_output = crystalcove_gpio_direction_output;
> + cg->chip.get = crystalcove_gpio_get;
> + cg->chip.set = crystalcove_gpio_set;
> + cg->chip.to_irq = crystalcove_gpio_to_irq;
> + cg->chip.base = -1;
> + cg->chip.ngpio = NUM_GPIO;
> + cg->chip.can_sleep = 1;
> + cg->chip.dev = dev;
> + cg->chip.dbg_show = crystalcove_gpio_dbg_show;
> +
> + retval = gpiochip_add(&cg->chip);
> + if (retval) {
> + dev_warn(&pdev->dev, "add gpio chip error: %d\n", retval);
> + goto out;
> + }
> +
> + cg->irq_base = irq_alloc_descs(-1, 0, NUM_GPIO, 0);
> + if (cg->irq_base < 0) {
> + retval = cg->irq_base;
> + cg->irq_base = 0;
> + dev_warn(&pdev->dev, "irq_alloc_descs error: %d\n", retval);
> + goto out_remove_gpio;
> + }
> +
> + for (i = 0; i < NUM_GPIO; i++) {
> + irq_set_chip_data(i + cg->irq_base, cg);
> + irq_set_chip_and_handler_name(i + cg->irq_base,
> + &crystalcove_irqchip,
> + handle_simple_irq, "demux");
> + }
> +
> + retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler,
> + IRQF_ONESHOT, "crystalcove_gpio", cg);
> +
> + if (retval) {
> + dev_warn(&pdev->dev, "request irq failed: %d\n", retval);
> + goto out_free_desc;
> + }
> +
> + return 0;
> +
> +out_free_desc:
> + irq_free_descs(cg->irq_base, NUM_GPIO);
> +out_remove_gpio:
> + gpiochip_remove(&cg->chip);
> +out:
> + return retval;
> +}
> +
> +static struct platform_driver crystalcove_gpio_driver = {
> + .probe = crystalcove_gpio_probe,
> + .driver = {
> + .name = "crystal_cove_gpio",
> + },
> +};
> +
> +module_platform_driver(crystalcove_gpio_driver);
> +
> +MODULE_AUTHOR("Yang, Bin <bin.yang@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Intel Crystal Cove GPIO Driver");
> +MODULE_LICENSE("GPL");
> --
> 1.8.3.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/