Re: [Patch V2 0/9] I2C ACPI operation region handler support

From: Rolf Eike Beer
Date: Tue May 20 2014 - 10:18:13 EST

Rolf Eike Beer wrote:
> Lan Tianyu wrote:
> > On 05/13/2014 09:09 PM, Rolf Eike Beer wrote:
> > > Am Montag, 28. April 2014, 22:27:39 schrieb Lan Tianyu:
> > >> ACPI 5.0 spec(5.5.2.4.5) defines GenericSerialBus(i2c, spi, uart)
> > >> operation
> > >> region. It allows ACPI aml code able to access such kind of devices to
> > >> implement some ACPI standard method.
> > >>
> > >> On the Asus T100TA, Bios use GenericSerialBus operation region to
> > >> access
> > >> i2c device to get battery info. So battery function depends on the I2C
> > >> operation region support. Here is the bug link.
> > >> https://bugzilla.kernel.org/show_bug.cgi?idi011

> > > I have tested this series and got some errors, but no additional
> > > functionality:

> this is an Aava Inari 8 tablet (pre-release hardware). Please find the DSDT
> and the dmesg.log attached.

It may be that I have taken the wrong ACPI files. This is the result of a
fresh run of acpidump, together with the most recent dmesg.log, just in case
I messed it up.

Kernel now is at 60b5f90+some patches:

8e7bd6f pinctrl: baytrail: Register GPIO chip after chip->to_irq is set
c4b2230 pinctrl: baytrail: Add back Baytrail-T ACPI ID
32f3364 gpio: Add support for Intel SoC PMIC (Crystal Cove)
088ee81 mfd: intel_soc_pmic: Build files
5315135 mfd: intel_soc_pmic: Crystal Cove support
8b5ed0b mfd: intel_soc_pmic: I2C interface
b18979f mfd: intel_soc_pmic: Core driver
5200b75 add debugging
(This is the debug patch Lan Tianyu sent as reply to the previous mail)
bd3e6c6 I2C/ACPI: Add CONFIG_I2C_ACPI config
947f0a1 I2C/ACPI: Move ACPI related code to i2c-acpi.c
534f182 I2C/ACPI: Add i2c ACPI operation region support
32384d4 I2C: Add smbus word/block process call helper function
aa6459e I2C: Add smbus quick read/write helper function
51825ed ACPI/Thermal: Use acpi_bus_attach_private_data() to attach private data
95e9e92 ACPI: Add acpi_bus_attach_private_data() to facilitate to attach data to ACPI handle
cc6fecb ACPICA: Export acpi_buffer_to_resource symbol
ad38de6 ACPI / LPSS: custom power domain for LPSS
b0caadf ACPI / PM: Export rest of the subsys functions
22a7210 ACPI / platform: add another ID for Broadcom Bluetooth and GPS chips
(this just adds AAM4752 as another platform id)
000627d ACPI / platform: add IDs for Broadcom Bluetooth and GPS chips

Eike
--
Rolf Eike Beer, emlix GmbH, http://www.emlix.com
Fon +49 551 30664-0, Fax +49 551 30664-11
Bertha-von-Suttner-Str. 9, 37085 Göttingen, Germany
Sitz der Gesellschaft: Göttingen, Amtsgericht Göttingen HR B 3160
Geschäftsführung: Dr. Uwe Kracke, Ust-IdNr.: DE 205 198 055

emlix - smart embedded open source

Attachment: acpi_fw10.dat.gz
Description: GNU Zip compressed data

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.0-rc5-Inari (root@devpool02) (gcc version 4.8.2 (Emlix Linux Inari) ) #1 SMP Tue May 20 13:33:31 UTC 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078345fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078346000-0x0000000078c45fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078c46000-0x0000000078d45fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000078d46000-0x0000000078d85fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000078d86000-0x00000000794c7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000794c8000-0x0000000079dc7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079dc8000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x78d85014 SMBIOS=0x78c45000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem03: type, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002585000) (21MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000002585000-0x0000000020000000) (474MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020100000-0x0000000071dc0000) (1308MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000071dc0000-0x0000000071de0000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000071de0000-0x0000000072bc7000) (13MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000072bc7000-0x0000000072bc9000) (0MB)
[ 0.000000] efi: mem14: type=1, attr=0xf, range=[0x0000000072bc9000-0x0000000073b46000) (15MB)
[ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000073b46000-0x0000000076a92000) (47MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x0000000076a92000-0x00000000774ec000) (10MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000774ec000-0x00000000774f9000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000774f9000-0x0000000077d46000) (8MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000077d46000-0x0000000078161000) (4MB)
[ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x0000000078161000-0x0000000078346000) (1MB)
[ 0.000000] efi: mem21: type=5, attr=0x800000000000000f, range=[0x0000000078346000-0x0000000078546000) (2MB)
[ 0.000000] efi: mem22: type=6, attr=0x800000000000000f, range=[0x0000000078546000-0x0000000078846000) (3MB)
[ 0.000000] efi: mem23: type=0, attr=0xf, range=[0x0000000078846000-0x0000000078c46000) (4MB)
[ 0.000000] efi: mem24: type, attr=0xf, range=[0x0000000078c46000-0x0000000078d46000) (1MB)
[ 0.000000] efi: mem25: type=9, attr=0xf, range=[0x0000000078d46000-0x0000000078d86000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x0000000078d86000-0x00000000794c8000) (7MB)
[ 0.000000] efi: mem27: type, attr=0xf, range=[0x00000000794c8000-0x0000000079dc8000) (9MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x0000000079dc8000-0x000000007a000000) (2MB)
[ 0.000000] efi: mem29: type, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem30: type, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem31: type, attr=0x8000000000000000, range=[0x00000000ffd00000-0x0000000100000000) (3MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Aava Mobile Oy Inari 8 2GB/Type2 - Board Product Name, BIOS BYT.5.03.47.0033-022 01/16/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFD00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 040000000 mask FE0000000 write-back
[ 0.000000] 3 base 060000000 mask FF0000000 write-back
[ 0.000000] 4 base 070000000 mask FF8000000 write-back
[ 0.000000] 5 base 078000000 mask FFC000000 write-back
[ 0.000000] 6 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 7 base 07AE00000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x2fffffff]
[ 0.000000] [mem 0x20100000-0x203fffff] page 4k
[ 0.000000] [mem 0x20400000-0x2fffffff] page 2M
[ 0.000000] BRK [0x0246a000, 0x0246afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x0246b000, 0x0246bfff] PGTABLE
[ 0.000000] ACPI: RSDP 0x78D85014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x78D61188 0000D4 (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x78D7F000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x78D6E000 00BAEC (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x78D84000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: TCPA 0x78D83000 000032 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x78D81000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x78D80000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x78D7E000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x78D7D000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x78D7C000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x78D7B000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x78D7A000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D6D000 0005FB (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D6B000 0018C2 (v01 INSYDE DptfTab 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D6A000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D69000 0000FF (v01 INSYDE SoCDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D68000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x78D67000 000034 (v03 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D66000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D65000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x78D64000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x78D63000 000044 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x78D62000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x78D60000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1064MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0246c000, 0x0246cfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x79ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0x78345fff]
[ 0.000000] node 0: [mem 0x78d86000-0x794c7fff]
[ 0.000000] node 0: [mem 0x79dc8000-0x79ffffff]
[ 0.000000] On node 0 totalpages: 494428
[ 0.000000] free_area_init_node: node 0, pgdat c17447c0, node_mem_map f68be020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 222974 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2129 pages used for memmap
[ 0.000000] HighMem zone: 267458 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7af00000-0x7eefffff
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 103
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6882000 s27264 r0 d21888 u49152
[ 0.000000] pcpu-alloc: s27264 r0 d21888 u49152 alloc*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 492652
[ 0.000000] Kernel command line: root=/dev/sda2 video=HDMI-A-1:1200x1920e drm_kms_helper.edid_firmware=HDMI-A-1:edid/1200x1920.bin
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007a000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1909196K/1977712K available (5512K kernel code, 337K rwdata, 1644K rodata, 12096K init, 1236K bss, 68516K reserved, 1038956K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff66000 - 0xfffff000 ( 612 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1755000 - 0xc2325000 (12096 kB)
[ 0.000000] .data : 0xc1562492 - 0xc1753640 (1988 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1562492 (5513 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalignd, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:1024 16
[ 0.000000] CPU 0 irqstacks, hardö000 softö000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0xa
[ 0.000000] Resolved frequency ID: 2, frequency: 133200 KHz
[ 0.000000] TSC runs at 1332000 KHz
[ 0.000000] lapic_timer_frequency = 133200
[ 0.000000] tsc: Detected 1332.000 MHz processor
[ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 2664.00 BogoMIPS (lpj32000)
[ 0.000055] pid_max: default: 32768 minimum: 301
[ 0.000071] ACPI: Core revision 20140214
[ 0.044283] ACPI: All ACPI Tables successfully acquired
[ 0.046946] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.046966] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.047312] Initializing cgroup subsys freezer
[ 0.047355] CPU: Physical Processor ID: 0
[ 0.047365] CPU: Processor Core ID: 0
[ 0.047376] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.047376] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.059505] mce: CPU supports 6 MCE banks
[ 0.059523] CPU0: Thermal monitoring enabled (TM1)
[ 0.059544] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.059544] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.059544] tlb_flushall_shift: 6
[ 0.059737] Freeing SMP alternatives memory: 20K (c2325000 - c232a000)
[ 0.059772] ------------[ cut here ]------------
[ 0.059792] WARNING: CPU: 0 PID: 0 at /tmp/e2/build/linux-git/mm/early_ioremap.c:136 __early_ioremap+0xee/0x1a6()
[ 0.059804] Modules linked in:
[ 0.059817] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc5-Inari #1
[ 0.059827] Hardware name: Aava Mobile Oy Inari 8 2GB/Type2 - Board Product Name, BIOS BYT.5.03.47.0033-022 01/16/2014
[ 0.059840] 00000000 00000000 c1701f0c c15561be 00000000 c1701f3c c103d194 c164e24c
[ 0.059862] 00000000 00000000 c1655de4 00000088 c1771c13 c1771c13 00000042 77526000
[ 0.059883] 00000000 c1701f4c c103d22d 00000009 00000000 c1701fa0 c1771c13 c17454c0
[ 0.059904] Call Trace:
[ 0.059919] [<c15561be>] dump_stack+0x41/0x52
[ 0.059932] [<c103d194>] warn_slowpath_common+0x74/0x90
[ 0.059945] [<c1771c13>] ? __early_ioremap+0xee/0x1a6
[ 0.059957] [<c1771c13>] ? __early_ioremap+0xee/0x1a6
[ 0.059968] [<c103d22d>] warn_slowpath_null+0x1d/0x20
[ 0.059981] [<c1771c13>] __early_ioremap+0xee/0x1a6
[ 0.059993] [<c10368df>] ? __native_set_fixmap+0x1f/0x30
[ 0.060021] [<c1771e80>] early_memremap+0xd/0xf
[ 0.060034] [<c1768753>] efi_bgrt_init+0xe6/0x129
[ 0.060046] [<c1768077>] efi_late_init+0x8/0xa
[ 0.060058] [<c1755a3b>] start_kernel+0x34f/0x35f
[ 0.060070] [<c1755523>] ? repair_env_string+0x51/0x51
[ 0.060081] [<c1755369>] i386_start_kernel+0x137/0x13a
[ 0.060104] ---[ end trace 840e1cff9080aa63 ]---
[ 0.063071] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.064118] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074144] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.074153] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.074162] ..... (found apic 0 pin 2) ...
[ 0.084178] ....... works.
[ 0.084186] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3745 @ 1.33GHz (fam: 06, model: 37, stepping: 08)
[ 0.084226] TSC deadline timer enabled
[ 0.084241] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.084267] ... version: 3
[ 0.084275] ... bit width: 40
[ 0.084283] ... generic registers: 2
[ 0.084290] ... value mask: 000000ffffffffff
[ 0.084299] ... max period: 000000ffffffffff
[ 0.084306] ... fixed-purpose events: 3
[ 0.084314] ... event mask: 0000000700000003
[ 0.085895] CPU 1 irqstacks, hardö000 softö000
[ 0.085901] x86: Booting SMP configuration:
[ 0.085911] .... node #0, CPUs: #1
[ 0.096027] Initializing CPU#1
[ 0.111238] CPU 2 irqstacks, hardö000 softö000
[ 0.111257] #2
[ 0.121310] Initializing CPU#2
[ 0.136523] CPU 3 irqstacks, hardö000 softö000
[ 0.136537] #3
[ 0.146591] Initializing CPU#3
[ 0.161676] x86: Booted up 1 node, 4 CPUs
[ 0.161696] smpboot: Total of 4 processors activated (10656.00 BogoMIPS)
[ 0.162646] devtmpfs: initialized
[ 0.163134] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.163150] PM: Registering ACPI NVS region [mem 0x78c46000-0x78d45fff] (1048576 bytes)
[ 0.163202] PM: Registering ACPI NVS region [mem 0x794c8000-0x79dc7fff] (9437184 bytes)
[ 0.163750] pinctrl core: initialized pinctrl subsystem
[ 0.163810] RTC time: 6:00:32, date: 05/20/14
[ 0.163897] NET: Registered protocol family 16
[ 0.164225] cpuidle: using governor ladder
[ 0.164236] cpuidle: using governor menu
[ 0.164310] ACPI: bus type PCI registered
[ 0.164463] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.164480] PCI: not using MMCONFIG
[ 0.164835] PCI: Using configuration type 1 for base access
[ 0.169934] ACPI: Added _OSI(Module Device)
[ 0.169949] ACPI: Added _OSI(Processor Device)
[ 0.169958] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.169967] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.205576] ACPI: SSDT 0x78BCAA90 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.207151] ACPI: Dynamic OEM Table Load:
[ 0.207166] ACPI: SSDT 0x00000000 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.207698] ACPI: SSDT 0x78BC9910 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.209556] ACPI: Dynamic OEM Table Load:
[ 0.209570] ACPI: SSDT 0x00000000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.216146] ACPI: SSDT 0x78BCBD90 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.217742] ACPI: Dynamic OEM Table Load:
[ 0.217756] ACPI: SSDT 0x00000000 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.220317] ACPI: SSDT 0x78BCBF10 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.221740] ACPI: Dynamic OEM Table Load:
[ 0.221754] ACPI: SSDT 0x00000000 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.227520] ACPI: Interpreter enabled
[ 0.227556] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.227580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.227601] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140214/hwxface-580)
[ 0.227622] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140214/hwxface-580)
[ 0.227642] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140214/hwxface-580)
[ 0.227660] ACPI: (supports S0)
[ 0.227668] ACPI: Using IOAPIC for interrupt routing
[ 0.227757] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.235389] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[ 0.235406] PCI: not using MMCONFIG
[ 0.235464] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.238750] ACPI: Power Resource [USBC] (on)
[ 0.242935] ACPI: Power Resource [WWPR] (off)
[ 0.253593] ACPI: Power Resource [PLPE] (on)
[ 0.265552] ACPI: Power Resource [CLK0] (on)
[ 0.265698] ACPI: Power Resource [CLK1] (on)
[ 0.266063] ACPI: Power Resource [P28X] (off)
[ 0.266206] ACPI: Power Resource [P18X] (off)
[ 0.268756] ACPI: Power Resource [TCPR] (off)
[ 0.275852] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.275877] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.276078] \_SB_.PCI0:_OSC invalid UUID
[ 0.276083] _OSC request data:1 1e 0
[ 0.276096] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.277397] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.277495] PCI host bridge to bus 0000:00
[ 0.277510] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.277522] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.277534] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.277545] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.277557] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.277569] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.277581] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.277593] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff]
[ 0.277604] pci_bus 0000:00: root bus resource [mem 0x7af00001-0x7ef00000]
[ 0.277616] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe]
[ 0.277628] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
[ 0.277652] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.277844] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.277870] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.277889] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.277907] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.278123] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.278154] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[ 0.278234] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.278409] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.278451] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[ 0.278469] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[ 0.278570] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.278744] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.278969] pci_bus 0000:00: on NUMA node 0
[ 0.280068] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.280384] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.280709] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.281023] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.281343] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.281666] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.281977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.282289] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.296031] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 0.296777] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 0.297560] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.297576] vgaarb: loaded
[ 0.297584] vgaarb: bridge control possible 0000:00:02.0
[ 0.297838] SCSI subsystem initialized
[ 0.297856] ACPI: bus type USB registered
[ 0.297942] usbcore: registered new interface driver usbfs
[ 0.297987] usbcore: registered new interface driver hub
[ 0.298068] usbcore: registered new device driver usb
[ 0.308808] intel_soc_pmic_i2c i2c-INT33FD:00: Can't enable IRQ as wake source: -6
[ 0.309261] pps_core: LinuxPPS API ver. 1 registered
[ 0.309273] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.309301] PTP clock support registered
[ 0.309569] Advanced Linux Sound Architecture Driver Initialized.
[ 0.309581] PCI: Using ACPI for IRQ routing
[ 0.309591] PCI: pci_cache_line_size set to 64 bytes
[ 0.309617] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.309630] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.309635] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.309640] e820: reserve RAM buffer [mem 0x78346000-0x7bffffff]
[ 0.309645] e820: reserve RAM buffer [mem 0x794c8000-0x7bffffff]
[ 0.309650] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.310156] cfg80211: Calling CRDA to update world regulatory domain
[ 0.310342] Switched to clocksource refined-jiffies
[ 0.310498] pnp: PnP ACPI init
[ 0.310525] ACPI: bus type PNP registered
[ 0.310655] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.310880] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.310971] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.311091] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.311106] system 00:03: [io 0x0400-0x047f] has been reserved
[ 0.311118] system 00:03: [io 0x0500-0x05fe] has been reserved
[ 0.311130] system 00:03: [io 0x0600-0x061f] has been reserved
[ 0.311142] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.311156] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.311511] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.313011] pnp 00:05: Plug and Play ACPI device, IDs INT0002 (active)
[ 0.314238] pnp 00:06: unknown resource type 19 in _CRS
[ 0.314252] pnp 00:06: can't evaluate _CRS: 1
[ 0.314322] pnp 00:06: Plug and Play ACPI device, IDs BCM2e3a (active)
[ 0.321212] pnp 00:07: unknown resource type 17 in _CRS
[ 0.321227] pnp 00:07: can't evaluate _CRS: 1
[ 0.321349] pnp 00:07: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active)
[ 0.321500] pnp 00:08: Plug and Play ACPI device, IDs INT33bd (active)
[ 0.321847] pnp 00:09: Plug and Play ACPI device, IDs INT3401 (active)
[ 0.322163] pnp 00:0a: unknown resource type 17 in _CRS
[ 0.322176] pnp 00:0a: can't evaluate _CRS: 1
[ 0.322254] pnp 00:0a: Plug and Play ACPI device, IDs INT3403 (active)
[ 0.322393] pnp 00:0b: unknown resource type 17 in _CRS
[ 0.322405] pnp 00:0b: can't evaluate _CRS: 1
[ 0.322482] pnp 00:0b: Plug and Play ACPI device, IDs INT3403 (active)
[ 0.322677] pnp 00:0c: unknown resource type 17 in _CRS
[ 0.322690] pnp 00:0c: can't evaluate _CRS: 1
[ 0.322768] pnp 00:0c: Plug and Play ACPI device, IDs INT3409 (active)
[ 0.323066] pnp: PnP ACPI: found 13 devices
[ 0.323077] ACPI: bus type PNP unregistered
[ 0.328160] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.328169] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.328175] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.328182] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.328188] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.328195] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.328201] pci_bus 0000:00: resource 10 [mem 0x90c00000-0x90ffffff]
[ 0.328208] pci_bus 0000:00: resource 11 [mem 0x7af00001-0x7ef00000]
[ 0.328214] pci_bus 0000:00: resource 12 [mem 0x80000000-0x908ffffe]
[ 0.328221] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed40fff]
[ 0.328276] NET: Registered protocol family 2
[ 0.328574] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.328622] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.328689] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.328729] TCP: reno registered
[ 0.328741] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.328763] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.328859] NET: Registered protocol family 1
[ 0.328905] pci 0000:00:02.0: Boot video device
[ 0.329302] PCI: CLS 0 bytes, default 64
[ 0.603872] byt_gpio INT33FC:02: Gpio 18 interrupt flood, disabling
[ 0.809288] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x808
[ 0.809323] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x808
[ 0.809351] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x808
[ 0.809379] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x808
[ 0.809501] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.810143] Scanning for low memory corruption every 60 seconds
[ 0.810759] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.810811] audit: initializing netlink subsys (disabled)
[ 0.810853] audit: type 00 audit(1400565632.776:1): initialized
[ 0.846786] bounce pool size: 64 pages
[ 0.846804] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.852277] msgmni has been set to 1760
[ 0.852992] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.853007] io scheduler noop registered
[ 0.853016] io scheduler deadline registered
[ 0.853177] io scheduler cfq registered (default)
[ 0.857446] intel_idle: MWAIT substates: 0x33000020
[ 0.857452] intel_idle: v0.4 model 0x37
[ 0.857457] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.863915] ACPI: AC Adapter [ADP1] (on-line)
[ 0.864239] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.864260] ACPI: Power Button [PWRF]
[ 0.864272] ACPI Warning: Could not enable fixed event - PowerButton (2) (20140214/evxface-628)
[ 0.868088] button: probe of LNXPWRBN:00 failed with error -22
[ 0.873934] ACPI Exception: AE_ERROR, Returned by Handler for [GeneralPurposeIo] (20140214/evregion-282)
[ 0.873966] ACPI Error: Method parse/execution failed [\_TZ_.TZ00._TMP] (Node f602ae40), AE_ERROR (20140214/psparse-536)
[ 0.874012] [Firmware Bug]: No valid trip found
[ 0.874275] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.894687] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.895709] 80860F0A:00: ttyS1 at MMIO 0x9091d000 (irq = 39, base_baud = 2764800) is a 16550A
[ 0.895963] 80860F0A:01: ttyS2 at MMIO 0x9091f000 (irq = 40, base_baud = 2764800) is a 16550A
[ 0.896298] hpet: number irqs doesn't agree with number of timers
[ 0.896437] Non-volatile memory driver v1.3
[ 0.896509] [drm] Initialized drm 1.1.0 20060810
[ 0.898464] [drm] Memory usable by graphics device = 2048M
[ 0.904214] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7
[ 0.904467] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7
[ 0.904726] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7
[ 0.904973] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7
[ 0.905220] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7
[ 0.907934] i915 0000:00:02.0: irq 128 for MSI/MSI-X
[ 0.907951] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.907962] [drm] Driver supports precise vblank timestamp query.
[ 0.960460] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.961250] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7
[ 0.961636] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7
[ 1.489394] [drm] forcing HDMI-A-1 connector ON
[ 1.565640] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 1.587008] [drm] Got external EDID base block and 0 extensions from "edid/1200x1920.bin" for connector "HDMI-A-1"
[ 1.733267] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[ 1.829666] fbcon: inteldrmfb (fb0) is primary device
[ 1.962432] Switched to clocksource tsc
[ 2.342020] Console: switching to colour frame buffer device 150x120
[ 2.375486] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.375632] i915 0000:00:02.0: registered panic notifier
[ 2.379824] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.381561] acpi device:1a: registered as cooling_device4
[ 2.382998] acpi device:21: registered as cooling_device5
[ 2.383305] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 2.383597] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.384114] brd: module loaded
[ 2.384656] loop: module loaded
[ 2.385372] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.385595] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.385935] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.385972] xhci_hcd 0000:00:14.0: irq 129 for MSI/MSI-X
[ 2.386111] usb usb1: New USB device found, idVendor6b, idProduct02
[ 2.386275] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.386445] usb usb1: Product: xHCI Host Controller
[ 2.386562] usb usb1: Manufacturer: Linux 3.15.0-rc5-Inari xhci_hcd
[ 2.386709] usb usb1: SerialNumber: 0000:00:14.0
[ 2.387133] hub 1-0:1.0: USB hub found
[ 2.387248] hub 1-0:1.0: 6 ports detected
[ 2.882952] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
[ 2.902145] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.902373] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.902645] usb usb2: New USB device found, idVendor6b, idProduct03
[ 2.902808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.902986] usb usb2: Product: xHCI Host Controller
[ 2.903106] usb usb2: Manufacturer: Linux 3.15.0-rc5-Inari xhci_hcd
[ 2.903253] usb usb2: SerialNumber: 0000:00:14.0
[ 2.903648] hub 2-0:1.0: USB hub found
[ 2.903759] hub 2-0:1.0: 1 port detected
[ 2.904266] usbcore: registered new interface driver usb-storage
[ 2.904542] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.948735] i8042: No controller found
[ 3.948957] mousedev: PS/2 mouse device common for all mice
[ 3.949282] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20140214/evxface-628)
[ 3.949709] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 3.949891] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram
[ 3.950106] i2c /dev entries driver
[ 3.951549] Intel P-state driver initializing.
[ 3.951683] Intel pstate controlling: cpu 0
[ 3.951828] Intel pstate controlling: cpu 1
[ 3.951964] Intel pstate controlling: cpu 2
[ 3.952098] Intel pstate controlling: cpu 3
[ 3.952325] sdhci: Secure Digital Host Controller Interface driver
[ 3.952472] sdhci: Copyright(c) Pierre Ossman
[ 3.953782] mmc0: no vqmmc regulator found
[ 3.953884] mmc0: no vmmc regulator found
[ 3.955125] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 3.956666] mmc1: no vqmmc regulator found
[ 3.956769] mmc1: no vmmc regulator found
[ 3.958012] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 3.959650] mmc2: no vqmmc regulator found
[ 3.959753] mmc2: no vmmc regulator found
[ 3.961088] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 3.961302] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.961404] EFI Variables Facility v0.08 2004-May-17
[ 3.970815] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.971281] usbcore: registered new interface driver usbhid
[ 3.971409] usbhid: USB HID core driver
[ 3.971909] TCP: cubic registered
[ 3.971966] Initializing XFRM netlink socket
[ 3.972273] NET: Registered protocol family 10
[ 3.972656] sit: IPv6 over IPv4 tunneling driver
[ 3.972948] NET: Registered protocol family 17
[ 3.973305] Using IPI No-Shortcut mode
[ 3.973521] registered taskstats version 1
[ 3.973853] Magic number: 14:92:14
[ 3.973984] console [netcon0] enabled
[ 3.974044] netconsole: network logging started
[ 3.974282] PM: Hibernation image not present or could not be loaded.
[ 3.974290] ALSA device list:
[ 3.974340] No soundcards found.
[ 3.974452] Warning: unable to open an initial console.
[ 3.981024] Freeing unused kernel memory: 12096K (c1755000 - c2325000)
[ 4.001010] udevd[966]: starting version 173
[ 4.071412] mmc0: BKOPS_EN bit is not set
[ 4.149730] mmc0: new HS200 MMC card at address 0001
[ 4.151250] mmcblk0: mmc0:0001 HCG8e 58.2 GiB
[ 4.151465] mmcblk0boot0: mmc0:0001 HCG8e partition 1 4.00 MiB
[ 4.151620] mmcblk0boot1: mmc0:0001 HCG8e partition 2 4.00 MiB
[ 4.151925] mmcblk0rpmb: mmc0:0001 HCG8e partition 3 4.00 MiB
[ 4.152736] mmcblk0: p1 p2
[ 4.157969] mmcblk0boot1: unknown partition table
[ 4.161515] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 4.161749] mmcblk0boot0:
[ 4.174061] usb 2-1: New USB device found, idVendor51, idProduct€46
[ 4.174187] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.174928] hub 2-1:1.0: USB hub found
[ 4.175026] hub 2-1:1.0: 4 ports detected
[ 4.304448] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 4.445836] usb 1-1: New USB device found, idVendor51, idProduct€44
[ 4.472022] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.498081] usb 1-1: SerialNumber: 420208698DA1
[ 4.524922] hub 1-1:1.0: USB hub found
[ 4.527445] Clocksource tsc unstable (delta = 64078296 ns)
[ 4.575235] Switched to clocksource refined-jiffies
[ 4.575303] hub 1-1:1.0: 4 ports detected
[ 4.665948] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 4.812017] usb 1-3: New USB device found, idVendord1, idProduct70
[ 4.838515] usb 1-3: New USB device strings: Mfr=5, Product=4, SerialNumber=0
[ 4.865162] usb 1-3: Product: HUAWEI Mobile Broadband Module
[ 4.891982] usb 1-3: Manufacturer: Huawei Technologies Co., Ltd.
[ 5.057359] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[ 5.244834] usb 1-4: New USB device found, idVendor 51, idProduct03
[ 5.271614] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.298249] usb 1-4: Product: DataTraveler 2.0
[ 5.324706] usb 1-4: Manufacturer: Kingston
[ 5.351290] usb 1-4: SerialNumber: 89900000000000000000017E
[ 5.379013] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 5.405930] scsi0 : usb-storage 1-4:1.0
[ 5.472462] usb 1-1.2: new high-speed USB device number 5 using xhci_hcd
[ 5.546109] usb 1-1.2: New USB device found, idVendor24, idProductu00
[ 5.572517] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.598796] usb 1-1.2: Product: LAN7500
[ 5.624817] usb 1-1.2: Manufacturer: SMSC
[ 5.650709] usb 1-1.2: SerialNumber: 00800f11700e
[ 5.722888] usb 1-1.3: new low-speed USB device number 6 using xhci_hcd
[ 5.799500] usb 1-1.3: New USB device found, idVendor6d, idProductÃ2
[ 5.825439] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.851433] usb 1-1.3: Product: USB Multimedia Keyboard
[ 5.877277] usb 1-1.3: Manufacturer: LITEON Technology
[ 5.903455] usb 1-1.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[ 5.934342] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C312.0001/input/input2
[ 5.987841] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:14.0-1.3/input0
[ 6.283845] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 6.312670] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.340500] sd 0:0:0:0: [sda] 7856128 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 6.368763] sd 0:0:0:0: [sda] Write Protect is off
[ 6.396559] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 6.396951] sd 0:0:0:0: [sda] No Caching mode page found
[ 6.424634] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.455250] sda: sda1 sda2
[ 6.493244] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 7.133143] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 7.165576] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 7.377686] random: nonblocking pool is initialized
[ 8.465142] EXT4-fs (sda2): recovery complete
[ 8.498270] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.397075] udevd[1685]: starting version 173
[ 9.575548] sst-acpi 80860F28:00: Direct firmware load failed with error -2
[ 9.586011] sst-acpi 80860F28:00: Falling back to user helper
[ 9.659046] smsc75xx v1.0.0
[ 9.663697] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered
[ 9.663727] platform byt-rt5640: Driver byt-rt5640 requests probe deferral
[ 9.665590] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input3
[ 9.665813] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered
[ 9.665830] platform byt-rt5640: Driver byt-rt5640 requests probe deferral
[ 9.665963] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input4
[ 9.666173] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered
[ 9.666201] platform byt-rt5640: Driver byt-rt5640 requests probe deferral
[ 9.687821] sst-acpi 80860F28:00: Cannot load firmware intel/fw_sst_0f28.bin-i2s_master
[ 9.740744] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered
[ 9.748565] platform byt-rt5640: Driver byt-rt5640 requests probe deferral
[ 9.802203] smsc75xx 1-1.2:1.0 eth0: register 'smsc75xx' at usb-0000:00:14.0-1.2, smsc75xx USB 2.0 Gigabit Ethernet, 70:2f:97:00:22:4f
[ 9.832548] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered
[ 9.832576] usbcore: registered new interface driver smsc75xx
[ 9.893278] platform byt-rt5640: Driver byt-rt5640 requests probe deferral
[ 17.848198] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 17.881105] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 17.912406] mmcblk0rpmb: retrying using single block read
[ 17.945754] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.979175] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 18.012512] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 18.045642] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 18.078551] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 18.111376] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 18.141842] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 18.172280] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 26.412192] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 26.445097] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 26.476216] mmcblk0rpmb: retrying using single block read
[ 26.509384] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 26.542804] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 26.576088] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 26.609213] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 26.642197] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 26.675018] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 26.705569] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 26.736209] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 34.976372] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 35.009672] mmcblk0rpmb: error -110 transferring data, sector 0, nr 16, cmd response 0x900, card status 0xb00
[ 35.041225] mmcblk0rpmb: retrying using single block read
[ 35.074866] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 35.108774] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 35.142514] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 35.175989] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 35.209198] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 35.242265] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 35.273048] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 35.303872] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 35.334799] end_request: I/O error, dev mmcblk0rpmb, sector 8
[ 35.365938] Buffer I/O error on device mmcblk0rpmb, logical block 1
[ 43.617294] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 43.650980] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
[ 43.682898] mmcblk0rpmb: retrying using single block read
[ 43.716786] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 43.750783] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 43.784503] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 43.818029] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 43.851320] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 43.884543] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 43.915400] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 43.946246] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 48.209694] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.750189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 49.780667] smsc75xx 1-1.2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 49.815109] smsc75xx 1-1.2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Attachment: signature.asc
Description: This is a digitally signed message part.