Re: [PATCH] Staging: rtl8192u: r8180_93cx6.c & r8192U_wx.c fix checkpatch.pl errors and warnings

From: DaeSeok Youn
Date: Tue May 27 2014 - 02:57:04 EST


Hi,

2014-05-27 14:43 GMT+09:00 Chaitanya Hazarey <c@xxxxx>:
> Fixed the following:
>
> ERROR: do not use C99 // comments
> ERROR: else should follow close brace '}'
> ERROR: need consistent spacing around '*' (ctx:WxV)
> ERROR: need consistent spacing around '|' (ctx:VxW)
> ERROR: space prohibited after that open parenthesis '('
> ERROR: space prohibited before that '--' (ctx:WxO)
> ERROR: space prohibited before that close parenthesis ')'
> ERROR: space required after that ',' (ctx:VxV)
> ERROR: space required after that ';' (ctx:VxV)
> ERROR: space required after that close brace '}'
> ERROR: space required before the open brace '{'
> ERROR: space required before the open parenthesis '('
> ERROR: spaces required around that '!=' (ctx:VxV)
> ERROR: spaces required around that '!=' (ctx:WxV)
> ERROR: spaces required around that '&&' (ctx:VxV)
> ERROR: spaces required around that '<' (ctx:VxV)
> ERROR: spaces required around that '=' (ctx:VxV)
> ERROR: spaces required around that '=' (ctx:VxW)
> ERROR: spaces required around that '=' (ctx:WxV)
> ERROR: spaces required around that '==' (ctx:VxV)
> ERROR: that open brace { should be on the previous line
> ERROR: trailing statements should be on next line
> WARNING: Missing a blank line after declarations
> WARNING: missing space after struct definition
> WARNING: please, no spaces at the start of a line
> WARNING: suspect code indent for conditional statements (16, 16)

Please break this up into smaller patches.
And need to resend this patch.
>
> Signed-off-by: Chaitanya Hazarey <c@xxxxx>
> ---
> drivers/staging/rtl8192u/r8180_93cx6.c | 58 ++---
> drivers/staging/rtl8192u/r8192U_wx.c | 373 +++++++++++++++++---------------
> 2 files changed, 223 insertions(+), 208 deletions(-)
>
> diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
> index cd06054..7a0051e 100644
> --- a/drivers/staging/rtl8192u/r8180_93cx6.c
> +++ b/drivers/staging/rtl8192u/r8180_93cx6.c
> @@ -53,7 +53,7 @@ static void eprom_ck_cycle(struct net_device *dev)
> }
>
>
> -static void eprom_w(struct net_device *dev,short bit)
> +static void eprom_w(struct net_device *dev, short bit)
> {
> u8 cmdreg;
>
> @@ -86,7 +86,7 @@ static void eprom_send_bits_string(struct net_device *dev, short b[], int len)
> {
> int i;
>
> - for(i=0; i<len; i++){
> + for (i = 0 ; i < len ; i++) {
I think it doesn't need to add a space between "i = 0" and ";".
just like below:
for (i = 0; i < len; i++) {

> eprom_w(dev, b[i]);
> eprom_ck_cycle(dev);
> }
> @@ -96,50 +96,50 @@ static void eprom_send_bits_string(struct net_device *dev, short b[], int len)
> u32 eprom_read(struct net_device *dev, u32 addr)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - short read_cmd[]={1,1,0};
> + short read_cmd[] = {1, 1, 0};
> short addr_str[8];
> int i;
> int addr_len;
> u32 ret;
>
> - ret=0;
> - //enable EPROM programming
> + ret = 0;
> + /* enable EPROM programming */
> write_nic_byte_E(dev, EPROM_CMD,
> (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
> force_pci_posting(dev);
> udelay(EPROM_DELAY);
>
> - if (priv->epromtype==EPROM_93c56){
> - addr_str[7]=addr & 1;
> - addr_str[6]=addr & (1<<1);
> - addr_str[5]=addr & (1<<2);
> - addr_str[4]=addr & (1<<3);
> - addr_str[3]=addr & (1<<4);
> - addr_str[2]=addr & (1<<5);
> - addr_str[1]=addr & (1<<6);
> - addr_str[0]=addr & (1<<7);
> - addr_len=8;
> - }else{
> - addr_str[5]=addr & 1;
> - addr_str[4]=addr & (1<<1);
> - addr_str[3]=addr & (1<<2);
> - addr_str[2]=addr & (1<<3);
> - addr_str[1]=addr & (1<<4);
> - addr_str[0]=addr & (1<<5);
> - addr_len=6;
> + if (priv->epromtype == EPROM_93c56) {
> + addr_str[7] = addr & 1;
> + addr_str[6] = addr & (1<<1);
> + addr_str[5] = addr & (1<<2);
> + addr_str[4] = addr & (1<<3);
> + addr_str[3] = addr & (1<<4);
> + addr_str[2] = addr & (1<<5);
> + addr_str[1] = addr & (1<<6);
> + addr_str[0] = addr & (1<<7);
> + addr_len = 8;
> + } else {
> + addr_str[5] = addr & 1;
> + addr_str[4] = addr & (1<<1);
> + addr_str[3] = addr & (1<<2);
> + addr_str[2] = addr & (1<<3);
> + addr_str[1] = addr & (1<<4);
> + addr_str[0] = addr & (1<<5);
> + addr_len = 6;
> }
> eprom_cs(dev, 1);
> eprom_ck_cycle(dev);
> eprom_send_bits_string(dev, read_cmd, 3);
> eprom_send_bits_string(dev, addr_str, addr_len);
>
> - //keep chip pin D to low state while reading.
> - //I'm unsure if it is necessary, but anyway shouldn't hurt
> + /* keep chip pin D to low state while reading.*/
> + /* I'm unsure if it is necessary, but anyway shouldn't hurt*/
> eprom_w(dev, 0);
>
> - for(i=0;i<16;i++){
> - //eeprom needs a clk cycle between writing opcode&adr
> - //and reading data. (eeprom outs a dummy 0)
> + for (i = 0 ; i < 16 ; i++) {
same above my comment.

> + /* eeprom needs a clk cycle between writing opcode&adr */
> + /* and reading data. (eeprom outs a dummy 0) */
> eprom_ck_cycle(dev);
> ret |= (eprom_r(dev)<<(15-i));
> }
> @@ -147,7 +147,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
> eprom_cs(dev, 0);
> eprom_ck_cycle(dev);
>
> - //disable EPROM programming
> + /* disable EPROM programming */
> write_nic_byte_E(dev, EPROM_CMD,
> (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
> return ret;
> diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
> index dab716f..5dd0654 100644
> --- a/drivers/staging/rtl8192u/r8192U_wx.c
> +++ b/drivers/staging/rtl8192u/r8192U_wx.c
> @@ -24,8 +24,8 @@
> #include "dot11d.h"
>
> #define RATE_COUNT 12
> -u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
> - 6000000,9000000,12000000,18000000,24000000,36000000,48000000,54000000};
> +u32 rtl8180_rates[] = {1000000, 2000000, 5500000, 11000000,
> + 6000000, 9000000, 12000000, 18000000, 24000000, 36000000, 48000000, 54000000};
>
>
> #ifndef ENETDOWN
> @@ -38,16 +38,16 @@ static int r8192_wx_get_freq(struct net_device *dev,
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - return ieee80211_wx_get_freq(priv->ieee80211,a,wrqu,b);
> + return ieee80211_wx_get_freq(priv->ieee80211, a, wrqu, b);
> }
>
>
> static int r8192_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
> union iwreq_data *wrqu, char *b)
> {
> - struct r8192_priv *priv=ieee80211_priv(dev);
> + struct r8192_priv *priv = ieee80211_priv(dev);
>
> - return ieee80211_wx_get_mode(priv->ieee80211,a,wrqu,b);
> + return ieee80211_wx_get_mode(priv->ieee80211, a, wrqu, b);
> }
>
>
> @@ -57,7 +57,8 @@ static int r8192_wx_get_rate(struct net_device *dev,
> union iwreq_data *wrqu, char *extra)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - return ieee80211_wx_get_rate(priv->ieee80211,info,wrqu,extra);
> +
> + return ieee80211_wx_get_rate(priv->ieee80211, info, wrqu, extra);
> }
>
>
> @@ -71,7 +72,7 @@ static int r8192_wx_set_rate(struct net_device *dev,
>
> down(&priv->wx_sem);
>
> - ret = ieee80211_wx_set_rate(priv->ieee80211,info,wrqu,extra);
> + ret = ieee80211_wx_set_rate(priv->ieee80211, info, wrqu, extra);
>
> up(&priv->wx_sem);
>
> @@ -88,7 +89,7 @@ static int r8192_wx_set_rts(struct net_device *dev,
>
> down(&priv->wx_sem);
>
> - ret = ieee80211_wx_set_rts(priv->ieee80211,info,wrqu,extra);
> + ret = ieee80211_wx_set_rts(priv->ieee80211, info, wrqu, extra);
>
> up(&priv->wx_sem);
>
> @@ -100,7 +101,7 @@ static int r8192_wx_get_rts(struct net_device *dev,
> union iwreq_data *wrqu, char *extra)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - return ieee80211_wx_get_rts(priv->ieee80211,info,wrqu,extra);
> + return ieee80211_wx_get_rts(priv->ieee80211, info, wrqu, extra);
> }
>
> static int r8192_wx_set_power(struct net_device *dev,
> @@ -112,7 +113,7 @@ static int r8192_wx_set_power(struct net_device *dev,
>
> down(&priv->wx_sem);
>
> - ret = ieee80211_wx_set_power(priv->ieee80211,info,wrqu,extra);
> + ret = ieee80211_wx_set_power(priv->ieee80211, info, wrqu, extra);
>
> up(&priv->wx_sem);
>
> @@ -124,7 +125,8 @@ static int r8192_wx_get_power(struct net_device *dev,
> union iwreq_data *wrqu, char *extra)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - return ieee80211_wx_get_power(priv->ieee80211,info,wrqu,extra);
> +
> + return ieee80211_wx_get_power(priv->ieee80211, info, wrqu, extra);
> }
>
> static int r8192_wx_force_reset(struct net_device *dev,
> @@ -135,7 +137,7 @@ static int r8192_wx_force_reset(struct net_device *dev,
>
> down(&priv->wx_sem);
>
> - printk("%s(): force reset ! extra is %d\n",__func__, *extra);
> + printk("%s(): force reset ! extra is %d\n", __func__, *extra);
> priv->force_reset = *extra;
> up(&priv->wx_sem);
> return 0;
> @@ -171,17 +173,17 @@ static int r8192_wx_set_crcmon(struct net_device *dev,
>
> down(&priv->wx_sem);
>
> - if(enable)
> - priv->crcmon=1;
> + if (enable)
> + priv->crcmon = 1;
> else
> - priv->crcmon=0;
> + priv->crcmon = 0;
>
> DMESG("bad CRC in monitor mode are %s",
> priv->crcmon ? "accepted" : "rejected");
>
> - if(prev != priv->crcmon && priv->up){
> - //rtl8180_down(dev);
> - //rtl8180_up(dev);
> + if (prev != priv->crcmon && priv->up) {
> + /*rtl8180_down(dev);*/
> + /*rtl8180_up(dev);*/
> }
>
> up(&priv->wx_sem);
> @@ -194,9 +196,10 @@ static int r8192_wx_set_mode(struct net_device *dev, struct iw_request_info *a,
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> int ret;
> +
> down(&priv->wx_sem);
>
> - ret = ieee80211_wx_set_mode(priv->ieee80211,a,wrqu,b);
> + ret = ieee80211_wx_set_mode(priv->ieee80211, a, wrqu, b);
>
> rtl8192_set_rxconf(dev);
>
> @@ -249,16 +252,16 @@ static int rtl8180_wx_get_range(struct net_device *dev,
> /* ~5 Mb/s real (802.11b) */
> range->throughput = 5 * 1000 * 1000;
>
> - // TODO: Not used in 802.11b?
> -// range->min_nwid; /* Minimal NWID we are able to set */
> - // TODO: Not used in 802.11b?
> -// range->max_nwid; /* Maximal NWID we are able to set */
> + /* TODO: Not used in 802.11b? */
> +/* range->min_nwid; */ /* Minimal NWID we are able to set */
> + /* TODO: Not used in 802.11b? */
> +/* range->max_nwid; */ /* Maximal NWID we are able to set */
>
> /* Old Frequency (backward compat - moved lower ) */
> -// range->old_num_channels;
> -// range->old_num_frequency;
> -// range->old_freq[6]; /* Filler to keep "version" at the same offset */
> - if(priv->rf_set_sens != NULL)
> +/* range->old_num_channels; */
> +/* range->old_num_frequency; */
> +/* range->old_freq[6]; */ /* Filler to keep "version" at the same offset */
> + if (priv->rf_set_sens != NULL)
> range->sensitivity = priv->max_sens; /* signal level threshold range */
>
> range->max_qual.qual = 100;
> @@ -281,7 +284,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
> range->min_frag = MIN_FRAG_THRESHOLD;
> range->max_frag = MAX_FRAG_THRESHOLD;
>
> - range->min_pmp=0;
> + range->min_pmp = 0;
> range->max_pmp = 5000000;
> range->min_pmt = 0;
> range->max_pmt = 65535*1000;
> @@ -292,30 +295,30 @@ static int rtl8180_wx_get_range(struct net_device *dev,
> range->we_version_compiled = WIRELESS_EXT;
> range->we_version_source = 16;
>
> -// range->retry_capa; /* What retry options are supported */
> -// range->retry_flags; /* How to decode max/min retry limit */
> -// range->r_time_flags; /* How to decode max/min retry life */
> -// range->min_retry; /* Minimal number of retries */
> -// range->max_retry; /* Maximal number of retries */
> -// range->min_r_time; /* Minimal retry lifetime */
> -// range->max_r_time; /* Maximal retry lifetime */
> +/* range->retry_capa; */ /* What retry options are supported */
> +/* range->retry_flags; */ /* How to decode max/min retry limit */
> +/* range->r_time_flags; */ /* How to decode max/min retry life */
> +/* range->min_retry; */ /* Minimal number of retries */
> +/* range->max_retry; */ /* Maximal number of retries */
> +/* range->min_r_time; */ /* Minimal retry lifetime */
> +/* range->max_r_time; */ /* Maximal retry lifetime */
>
>
> for (i = 0, val = 0; i < 14; i++) {
>
> - // Include only legal frequencies for some countries
> + /* Include only legal frequencies for some countries */
> if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
> range->freq[val].i = i + 1;
> range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
> range->freq[val].e = 1;
> val++;
> } else {
> - // FIXME: do we need to set anything for channels
> - // we don't use ?
> + /* FIXME: do we need to set anything for channels */
> + /* we don't use ? */
> }
>
> if (val == IW_MAX_FREQUENCIES)
> - break;
> + break;
> }
> range->num_frequency = val;
> range->num_channels = val;
> @@ -333,30 +336,28 @@ static int r8192_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
> struct ieee80211_device *ieee = priv->ieee80211;
> int ret = 0;
>
> - if(!priv->up) return -ENETDOWN;
> + if (!priv->up)
> + return -ENETDOWN;
>
> if (priv->ieee80211->LinkDetectInfo.bBusyTraffic == true)
> return -EAGAIN;
> - if (wrqu->data.flags & IW_SCAN_THIS_ESSID)
> - {
> + if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
> struct iw_scan_req *req = (struct iw_scan_req *)b;
> - if (req->essid_len)
> - {
> - //printk("==**&*&*&**===>scan set ssid:%s\n", req->essid);
> + if (req->essid_len) {
> + /* printk("==**&*&*&**===>scan set ssid:%s\n", req->essid); */
this dead code can be removed.
> ieee->current_network.ssid_len = req->essid_len;
> memcpy(ieee->current_network.ssid, req->essid, req->essid_len);
> - //printk("=====>network ssid:%s\n", ieee->current_network.ssid);
> + /* printk("=====>network ssid:%s\n", ieee->current_network.ssid); */
this dead code can be removed.
> }
> }
>
> down(&priv->wx_sem);
> - if(priv->ieee80211->state != IEEE80211_LINKED){
> + if (priv->ieee80211->state != IEEE80211_LINKED) {
> priv->ieee80211->scanning = 0;
> ieee80211_softmac_scan_syncro(priv->ieee80211);
> ret = 0;
> - }
> - else
> - ret = ieee80211_wx_set_scan(priv->ieee80211,a,wrqu,b);
> + } else
> + ret = ieee80211_wx_set_scan(priv->ieee80211, a, wrqu, b);
"if" has a curly brace and then "else" add brace also.

> up(&priv->wx_sem);
> return ret;
> }
> @@ -369,11 +370,12 @@ static int r8192_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
> int ret;
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - if(!priv->up) return -ENETDOWN;
> + if (!priv->up)
> + return -ENETDOWN;
>
> down(&priv->wx_sem);
>
> - ret = ieee80211_wx_get_scan(priv->ieee80211,a,wrqu,b);
> + ret = ieee80211_wx_get_scan(priv->ieee80211, a, wrqu, b);
>
> up(&priv->wx_sem);
>
> @@ -386,9 +388,10 @@ static int r8192_wx_set_essid(struct net_device *dev,
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> int ret;
> +
> down(&priv->wx_sem);
>
> - ret = ieee80211_wx_set_essid(priv->ieee80211,a,wrqu,b);
> + ret = ieee80211_wx_set_essid(priv->ieee80211, a, wrqu, b);
>
> up(&priv->wx_sem);
>
> @@ -480,10 +483,11 @@ static int r8192_wx_set_wap(struct net_device *dev,
>
> int ret;
> struct r8192_priv *priv = ieee80211_priv(dev);
> -// struct sockaddr *temp = (struct sockaddr *)awrq;
> +/* struct sockaddr *temp = (struct sockaddr *)awrq; */
> +
> down(&priv->wx_sem);
>
> - ret = ieee80211_wx_set_wap(priv->ieee80211,info,awrq,extra);
> + ret = ieee80211_wx_set_wap(priv->ieee80211, info, awrq, extra);
>
> up(&priv->wx_sem);
>
> @@ -498,7 +502,7 @@ static int r8192_wx_get_wap(struct net_device *dev,
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - return ieee80211_wx_get_wap(priv->ieee80211,info,wrqu,extra);
> + return ieee80211_wx_get_wap(priv->ieee80211, info, wrqu, extra);
> }
>
>
> @@ -519,35 +523,38 @@ static int r8192_wx_set_enc(struct net_device *dev,
> struct ieee80211_device *ieee = priv->ieee80211;
> int ret;
>
> - //u32 TargetContent;
> - u32 hwkey[4]={0,0,0,0};
> - u8 mask=0xff;
> - u32 key_idx=0;
> - //u8 broadcast_addr[6] ={ 0xff,0xff,0xff,0xff,0xff,0xff};
> - u8 zero_addr[4][6] ={ {0x00,0x00,0x00,0x00,0x00,0x00},
> - {0x00,0x00,0x00,0x00,0x00,0x01},
> - {0x00,0x00,0x00,0x00,0x00,0x02},
> - {0x00,0x00,0x00,0x00,0x00,0x03} };
> + /*u32 TargetContent; */
> + u32 hwkey[4] = {0, 0, 0, 0};
> + u8 mask = 0xff;
> + u32 key_idx = 0;
> + /*u8 broadcast_addr[6] ={ 0xff,0xff,0xff,0xff,0xff,0xff}; */
Is this really needed?
> + u8 zero_addr[4][6] = { {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} };
> int i;
>
> - if(!priv->up) return -ENETDOWN;
> + if (!priv->up)
> + return -ENETDOWN;
>
> down(&priv->wx_sem);
>
> RT_TRACE(COMP_SEC, "Setting SW wep key");
> - ret = ieee80211_wx_set_encode(priv->ieee80211,info,wrqu,key);
> + ret = ieee80211_wx_set_encode(priv->ieee80211, info, wrqu, key);
>
> up(&priv->wx_sem);
>
>
>
> - //sometimes, the length is zero while we do not type key value
> - if(wrqu->encoding.length!=0){
> + /*sometimes, the length is zero while we do not type key value */
> + if (wrqu->encoding.length != 0) {
>
> - for(i=0 ; i<4 ; i++){
> + for (i = 0 ; i < 4 ; i++) {
> hwkey[i] |= key[4*i+0]&mask;
> - if(i==1&&(4*i+1)==wrqu->encoding.length) mask=0x00;
> - if(i==3&&(4*i+1)==wrqu->encoding.length) mask=0x00;
> + if (i == 1 && (4*i+1) == wrqu->encoding.length)
> + mask = 0x00;
> + if (i == 3 && (4*i+1) == wrqu->encoding.length)
> + mask = 0x00;
this "if" condition like below:
if (5 == wrqu->encoding.length || 13 == wrqu->encoding.length)
mask = 0x00;
and this should be outside "for" loop

> hwkey[i] |= (key[4*i+1]&mask)<<8;
> hwkey[i] |= (key[4*i+2]&mask)<<16;
> hwkey[i] |= (key[4*i+3]&mask)<<24;
> @@ -556,43 +563,54 @@ static int r8192_wx_set_enc(struct net_device *dev,
> #define CONF_WEP40 0x4
> #define CONF_WEP104 0x14
>
> - switch (wrqu->encoding.flags & IW_ENCODE_INDEX){
> - case 0: key_idx = ieee->tx_keyidx; break;
> - case 1: key_idx = 0; break;
> - case 2: key_idx = 1; break;
> - case 3: key_idx = 2; break;
> - case 4: key_idx = 3; break;
> - default: break;
> + switch (wrqu->encoding.flags & IW_ENCODE_INDEX) {
> + case 0:
> + key_idx = ieee->tx_keyidx;
> + break;
> + case 1:
> + key_idx = 0;
> + break;
> + case 2:
> + key_idx = 1;
> + break;
> + case 3:
> + key_idx = 2;
> + break;
> + case 4:
> + key_idx = 3;
> + break;
> + default:
> + break;
> }
>
> - if(wrqu->encoding.length==0x5){
> + if (wrqu->encoding.length == 0x5) {
> ieee->pairwise_key_type = KEY_TYPE_WEP40;
> EnableHWSecurityConfig8192(dev);
>
> - setKey( dev,
> - key_idx, //EntryNo
> - key_idx, //KeyIndex
> - KEY_TYPE_WEP40, //KeyType
> + setKey(dev,
> + key_idx, /*EntryNo */
> + key_idx, /*KeyIndex */
> + KEY_TYPE_WEP40, /*KeyType */
> zero_addr[key_idx],
> - 0, //DefaultKey
> - hwkey); //KeyContent
> + 0, /*DefaultKey */
> + hwkey); /*KeyContent */
>
> }
>
> - else if(wrqu->encoding.length==0xd){
> + else if (wrqu->encoding.length == 0xd) {
> ieee->pairwise_key_type = KEY_TYPE_WEP104;
> EnableHWSecurityConfig8192(dev);
>
> - setKey( dev,
> - key_idx, //EntryNo
> - key_idx, //KeyIndex
> - KEY_TYPE_WEP104, //KeyType
> + setKey(dev,
> + key_idx, /*EntryNo */
> + key_idx, /*KeyIndex */
> + KEY_TYPE_WEP104, /*KeyType */
> zero_addr[key_idx],
> - 0, //DefaultKey
> - hwkey); //KeyContent
> + 0, /*DefaultKey */
> + hwkey); /*KeyContent */
>
> - }
> - else printk("wrong type in WEP, not WEP40 and WEP104\n");
> + } else
> + printk("wrong type in WEP, not WEP40 and WEP104\n");
>
> }
>
> @@ -600,12 +618,12 @@ static int r8192_wx_set_enc(struct net_device *dev,
> }
>
>
> -static int r8192_wx_set_scan_type(struct net_device *dev, struct iw_request_info *aa, union
> - iwreq_data *wrqu, char *p){
> +static int r8192_wx_set_scan_type(struct net_device *dev, struct iw_request_info *aa,
> + union iwreq_data *wrqu, char *p){
>
> struct r8192_priv *priv = ieee80211_priv(dev);
> - int *parms=(int *)p;
> - int mode=parms[0];
> + int *parms = (int *)p;
> + int mode = parms[0];
>
> priv->ieee80211->active_scan = mode;
>
> @@ -624,24 +642,24 @@ static int r8192_wx_set_retry(struct net_device *dev,
> down(&priv->wx_sem);
>
> if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
> - wrqu->retry.disabled){
> + wrqu->retry.disabled) {
> err = -EINVAL;
> goto exit;
> }
> - if (!(wrqu->retry.flags & IW_RETRY_LIMIT)){
> + if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) {
> err = -EINVAL;
> goto exit;
> }
>
> - if(wrqu->retry.value > R8180_MAX_RETRY){
> - err= -EINVAL;
> + if (wrqu->retry.value > R8180_MAX_RETRY) {
> + err = -EINVAL;
> goto exit;
> }
> if (wrqu->retry.flags & IW_RETRY_MAX) {
> priv->retry_rts = wrqu->retry.value;
> DMESG("Setting retry for RTS/CTS data to %d", wrqu->retry.value);
>
> - }else {
> + } else {
> priv->retry_data = wrqu->retry.value;
> DMESG("Setting retry for non RTS/CTS data to %d", wrqu->retry.value);
> }
> @@ -687,7 +705,7 @@ static int r8192_wx_get_retry(struct net_device *dev,
> wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
> wrqu->retry.value = priv->retry_data;
> }
> - //printk("returning %d",wrqu->retry.value);
> + /* printk("returning %d",wrqu->retry.value); */
>
>
> return 0;
> @@ -698,7 +716,8 @@ static int r8192_wx_get_sens(struct net_device *dev,
> union iwreq_data *wrqu, char *extra)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - if(priv->rf_set_sens == NULL)
> +
> + if (priv->rf_set_sens == NULL)
> return -1; /* we have not this support for this radio */
> wrqu->sens.value = priv->sens;
> return 0;
> @@ -714,15 +733,15 @@ static int r8192_wx_set_sens(struct net_device *dev,
>
> short err = 0;
> down(&priv->wx_sem);
> - //DMESG("attempt to set sensivity to %ddb",wrqu->sens.value);
> - if(priv->rf_set_sens == NULL) {
> - err= -1; /* we have not this support for this radio */
> + /*DMESG("attempt to set sensivity to %ddb",wrqu->sens.value);*/
> + if (priv->rf_set_sens == NULL) {
> + err = -1; /* we have not this support for this radio */
> goto exit;
> }
> - if(priv->rf_set_sens(dev, wrqu->sens.value) == 0)
> + if (priv->rf_set_sens(dev, wrqu->sens.value) == 0)
> priv->sens = wrqu->sens.value;
> else
> - err= -EINVAL;
> + err = -EINVAL;
>
> exit:
> up(&priv->wx_sem);
> @@ -730,77 +749,72 @@ exit:
> return err;
> }
>
> -//hw security need to reorganized.
> +/*hw security need to reorganized. */
> static int r8192_wx_set_enc_ext(struct net_device *dev,
> struct iw_request_info *info,
> union iwreq_data *wrqu, char *extra)
> {
> - int ret=0;
> + int ret = 0;
> struct r8192_priv *priv = ieee80211_priv(dev);
> struct ieee80211_device *ieee = priv->ieee80211;
> - //printk("===>%s()\n", __func__);
> +
> + /* printk("===>%s()\n", __func__); */
this line can be removed.
>
>
> down(&priv->wx_sem);
> ret = ieee80211_wx_set_encode_ext(priv->ieee80211, info, wrqu, extra);
>
> {
> - u8 broadcast_addr[6] = {0xff,0xff,0xff,0xff,0xff,0xff};
> + u8 broadcast_addr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
> u8 zero[6] = {0};
> u32 key[4] = {0};
> struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
> struct iw_point *encoding = &wrqu->encoding;
> u8 idx = 0, alg = 0, group = 0;
> if ((encoding->flags & IW_ENCODE_DISABLED) ||
> - ext->alg == IW_ENCODE_ALG_NONE) //none is not allowed to use hwsec WB 2008.07.01
> + ext->alg == IW_ENCODE_ALG_NONE) /*none is not allowed to use hwsec WB 2008.07.01 */
over 80 character.
> goto end_hw_sec;
>
> - alg = (ext->alg == IW_ENCODE_ALG_CCMP)?KEY_TYPE_CCMP:ext->alg; // as IW_ENCODE_ALG_CCMP is defined to be 3 and KEY_TYPE_CCMP is defined to 4;
> + alg = (ext->alg == IW_ENCODE_ALG_CCMP)?KEY_TYPE_CCMP:ext->alg; /* as IW_ENCODE_ALG_CCMP is defined to be 3 and KEY_TYPE_CCMP is defined to 4; */
over 80 character in a line.

> idx = encoding->flags & IW_ENCODE_INDEX;
> if (idx)
> - idx --;
> + idx--;
> group = ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY;
>
> - if ((!group) || (IW_MODE_ADHOC == ieee->iw_mode) || (alg == KEY_TYPE_WEP40))
> - {
> - if ((ext->key_len == 13) && (alg == KEY_TYPE_WEP40) )
> + if ((!group) || (IW_MODE_ADHOC == ieee->iw_mode) || (alg == KEY_TYPE_WEP40)) {
> + if ((ext->key_len == 13) && (alg == KEY_TYPE_WEP40))
> alg = KEY_TYPE_WEP104;
> ieee->pairwise_key_type = alg;
> EnableHWSecurityConfig8192(dev);
> }
> - memcpy((u8 *)key, ext->key, 16); //we only get 16 bytes key.why? WB 2008.7.1
> -
> - if ((alg & KEY_TYPE_WEP40) && (ieee->auth_mode !=2) )
> - {
> -
> - setKey( dev,
> - idx,//EntryNo
> - idx, //KeyIndex
> - alg, //KeyType
> - zero, //MacAddr
> - 0, //DefaultKey
> - key); //KeyContent
> - }
> - else if (group)
> - {
> + memcpy((u8 *)key, ext->key, 16); /*we only get 16 bytes key.why? WB 2008.7.1 */
> +
> + if ((alg & KEY_TYPE_WEP40) && (ieee->auth_mode != 2)) {
> +
> + setKey(dev,
> + idx,/*EntryNo */
> + idx, /*KeyIndex */
> + alg, /*KeyType */
> + zero, /*MacAddr */
> + 0, /*DefaultKey */
> + key); /*KeyContent */
> + } else if (group) {
> ieee->group_key_type = alg;
> - setKey( dev,
> - idx,//EntryNo
> - idx, //KeyIndex
> - alg, //KeyType
> - broadcast_addr, //MacAddr
> - 0, //DefaultKey
> - key); //KeyContent
> - }
> - else //pairwise key
> - {
> - setKey( dev,
> - 4,//EntryNo
> - idx, //KeyIndex
> - alg, //KeyType
> - (u8 *)ieee->ap_mac_addr, //MacAddr
> - 0, //DefaultKey
> - key); //KeyContent
> + setKey(dev,
> + idx,/*EntryNo */
> + idx, /*KeyIndex */
> + alg, /*KeyType */
> + broadcast_addr, /*MacAddr */
> + 0, /*DefaultKey */
> + key); /*KeyContent */
> + } else /*pairwise key */ {
> + setKey(dev,
> + 4,/*EntryNo */
> + idx, /*KeyIndex */
> + alg, /*KeyType */
> + (u8 *)ieee->ap_mac_addr, /*MacAddr */
> + 0, /*DefaultKey */
> + key); /*KeyContent */
> }
>
>
> @@ -816,9 +830,10 @@ static int r8192_wx_set_auth(struct net_device *dev,
> struct iw_request_info *info,
> union iwreq_data *data, char *extra)
> {
> - int ret=0;
> - //printk("====>%s()\n", __func__);
> + int ret = 0;
> + /*printk("====>%s()\n", __func__); */
remove.
> struct r8192_priv *priv = ieee80211_priv(dev);
> +
> down(&priv->wx_sem);
> ret = ieee80211_wx_set_auth(priv->ieee80211, info, &(data->param), extra);
> up(&priv->wx_sem);
> @@ -829,10 +844,11 @@ static int r8192_wx_set_mlme(struct net_device *dev,
> struct iw_request_info *info,
> union iwreq_data *wrqu, char *extra)
> {
> - //printk("====>%s()\n", __func__);
> + /*printk("====>%s()\n", __func__); */
remove.
>
> - int ret=0;
> + int ret = 0;
> struct r8192_priv *priv = ieee80211_priv(dev);
> +
> down(&priv->wx_sem);
> ret = ieee80211_wx_set_mlme(priv->ieee80211, info, wrqu, extra);
>
> @@ -844,27 +860,27 @@ static int r8192_wx_set_gen_ie(struct net_device *dev,
> struct iw_request_info *info,
> union iwreq_data *data, char *extra)
> {
> - //printk("====>%s(), len:%d\n", __func__, data->length);
> - int ret=0;
> + /*printk("====>%s(), len:%d\n", __func__, data->length); */
remove.
> + int ret = 0;
> struct r8192_priv *priv = ieee80211_priv(dev);
> +
> down(&priv->wx_sem);
> ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, data->data.length);
> up(&priv->wx_sem);
> - //printk("<======%s(), ret:%d\n", __func__, ret);
> + /*printk("<======%s(), ret:%d\n", __func__, ret); */
remove this.
> return ret;
>
>
> }
>
> static int dummy(struct net_device *dev, struct iw_request_info *a,
> - union iwreq_data *wrqu,char *b)
> + union iwreq_data *wrqu, char *b)
> {
> return -1;
> }
>
>
> -static iw_handler r8192_wx_handlers[] =
> -{
> +static iw_handler r8192_wx_handlers[] = {
> NULL, /* SIOCSIWCOMMIT */
> r8192_wx_get_name, /* SIOCGIWNAME */
> dummy, /* SIOCSIWNWID */
> @@ -913,13 +929,13 @@ static iw_handler r8192_wx_handlers[] =
> r8192_wx_get_power, /* SIOCGIWPOWER */
> NULL, /*---hole---*/
> NULL, /*---hole---*/
> - r8192_wx_set_gen_ie,//NULL, /* SIOCSIWGENIE */
> + r8192_wx_set_gen_ie,/*NULL, */ /* SIOCSIWGENIE */
> NULL, /* SIOCSIWGENIE */
>
> - r8192_wx_set_auth,//NULL, /* SIOCSIWAUTH */
> - NULL,//r8192_wx_get_auth,//NULL, /* SIOCSIWAUTH */
> + r8192_wx_set_auth,/*NULL, */ /* SIOCSIWAUTH */
> + NULL,/*r8192_wx_get_auth,*//*NULL,*/ /* SIOCSIWAUTH */
> r8192_wx_set_enc_ext, /* SIOCSIWENCODEEXT */
> - NULL,//r8192_wx_get_enc_ext,//NULL, /* SIOCSIWENCODEEXT */
> + NULL,/*r8192_wx_get_enc_ext,*//*NULL,*/ /* SIOCSIWENCODEEXT */
> NULL, /* SIOCSIWPMKSA */
> NULL, /*---hole---*/
>
> @@ -952,27 +968,26 @@ static const struct iw_priv_args r8192_private_args[] = {
>
>
> static iw_handler r8192_private_handler[] = {
> -// r8192_wx_set_monitor, /* SIOCIWFIRSTPRIV */
> +/* r8192_wx_set_monitor, *//* SIOCIWFIRSTPRIV */
> r8192_wx_set_crcmon, /*SIOCIWSECONDPRIV*/
> -// r8192_wx_set_forceassociate,
> -// r8192_wx_set_beaconinterval,
> -// r8192_wx_set_monitor_type,
> +/* r8192_wx_set_forceassociate, */
> +/* r8192_wx_set_beaconinterval, */
> +/* r8192_wx_set_monitor_type, */
> r8192_wx_set_scan_type,
> r8192_wx_set_rawtx,
> - //r8192_wx_null,
> + /*r8192_wx_null, */
> r8192_wx_force_reset,
> };
>
> struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
> {
> - struct r8192_priv *priv = ieee80211_priv(dev);
> + struct r8192_priv *priv = ieee80211_priv(dev);
> struct ieee80211_device *ieee = priv->ieee80211;
> struct iw_statistics *wstats = &priv->wstats;
> int tmp_level = 0;
> int tmp_qual = 0;
> int tmp_noise = 0;
> - if(ieee->state < IEEE80211_LINKED)
> - {
> + if (ieee->state < IEEE80211_LINKED) {
> wstats->qual.qual = 0;
> wstats->qual.level = 0;
> wstats->qual.noise = 0;
> @@ -980,20 +995,20 @@ struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
> return wstats;
> }
>
> - tmp_level = (&ieee->current_network)->stats.rssi;
> + tmp_level = (&ieee->current_network)->stats.rssi;
> tmp_qual = (&ieee->current_network)->stats.signal;
> tmp_noise = (&ieee->current_network)->stats.noise;
> - //printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise);
> + /*printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise); */
>
> wstats->qual.level = tmp_level;
> wstats->qual.qual = tmp_qual;
> wstats->qual.noise = tmp_noise;
> - wstats->qual.updated = IW_QUAL_ALL_UPDATED| IW_QUAL_DBM;
> + wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
> return wstats;
> }
>
>
> -struct iw_handler_def r8192_wx_handlers_def={
> +struct iw_handler_def r8192_wx_handlers_def = {
> .standard = r8192_wx_handlers,
> .num_standard = ARRAY_SIZE(r8192_wx_handlers),
> .private = r8192_private_handler,
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/