Re: [PATCH] Staging: rtl8192u: r8180_93cx6.c & r8192U_wx.c fix checkpatch.pl errors and warnings
From: DaeSeok Youn
Date: Tue May 27 2014 - 21:11:51 EST
Hi,
2014-05-28 5:28 GMT+09:00 Chaitanya Hazarey <c@xxxxx>:
> Hey DaeSeok,
>
> I fixed all of them except -
>
> this "if" condition like below:
> if (5 == wrqu->encoding.length || 13 == wrqu->encoding.length)
> mask = 0x00;
> and this should be outside "for" loop
>
> Can you please elaborate on this?
origin code:
if(wrqu->encoding.length!=0){
for(i=0 ; i<4 ; i++){
hwkey[i] |= key[4*i+0]&mask;
if(i==1&&(4*i+1)==wrqu->encoding.length) mask=0x00;
if(i==3&&(4*i+1)==wrqu->encoding.length) mask=0x00;
hwkey[i] |= (key[4*i+1]&mask)<<8;
hwkey[i] |= (key[4*i+2]&mask)<<16;
hwkey[i] |= (key[4*i+3]&mask)<<24;
}
....
I think "i == 1 && (4*i+1)" statement is same as 5, so it seems to be
"if (wrqu->encoding.length == 5)". Once mask value is set to zero, it
doesn't need to set anymore. (I don't know what the "5" means :-) )
It is just my opinion.
regards,
Daeseok Youn
>
> Thanks,
>
> Chaitanya
>
> On Mon, May 26, 2014 at 11:56 PM, DaeSeok Youn <daeseok.youn@xxxxxxxxx> wrote:
>> Hi,
>>
>> 2014-05-27 14:43 GMT+09:00 Chaitanya Hazarey <c@xxxxx>:
>>> Fixed the following:
>>>
>>> ERROR: do not use C99 // comments
>>> ERROR: else should follow close brace '}'
>>> ERROR: need consistent spacing around '*' (ctx:WxV)
>>> ERROR: need consistent spacing around '|' (ctx:VxW)
>>> ERROR: space prohibited after that open parenthesis '('
>>> ERROR: space prohibited before that '--' (ctx:WxO)
>>> ERROR: space prohibited before that close parenthesis ')'
>>> ERROR: space required after that ',' (ctx:VxV)
>>> ERROR: space required after that ';' (ctx:VxV)
>>> ERROR: space required after that close brace '}'
>>> ERROR: space required before the open brace '{'
>>> ERROR: space required before the open parenthesis '('
>>> ERROR: spaces required around that '!=' (ctx:VxV)
>>> ERROR: spaces required around that '!=' (ctx:WxV)
>>> ERROR: spaces required around that '&&' (ctx:VxV)
>>> ERROR: spaces required around that '<' (ctx:VxV)
>>> ERROR: spaces required around that '=' (ctx:VxV)
>>> ERROR: spaces required around that '=' (ctx:VxW)
>>> ERROR: spaces required around that '=' (ctx:WxV)
>>> ERROR: spaces required around that '==' (ctx:VxV)
>>> ERROR: that open brace { should be on the previous line
>>> ERROR: trailing statements should be on next line
>>> WARNING: Missing a blank line after declarations
>>> WARNING: missing space after struct definition
>>> WARNING: please, no spaces at the start of a line
>>> WARNING: suspect code indent for conditional statements (16, 16)
>>
>> Please break this up into smaller patches.
>> And need to resend this patch.
>>>
>>> Signed-off-by: Chaitanya Hazarey <c@xxxxx>
>>> ---
>>> drivers/staging/rtl8192u/r8180_93cx6.c | 58 ++---
>>> drivers/staging/rtl8192u/r8192U_wx.c | 373 +++++++++++++++++---------------
>>> 2 files changed, 223 insertions(+), 208 deletions(-)
>>>
>>> diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
>>> index cd06054..7a0051e 100644
>>> --- a/drivers/staging/rtl8192u/r8180_93cx6.c
>>> +++ b/drivers/staging/rtl8192u/r8180_93cx6.c
>>> @@ -53,7 +53,7 @@ static void eprom_ck_cycle(struct net_device *dev)
>>> }
>>>
>>>
>>> -static void eprom_w(struct net_device *dev,short bit)
>>> +static void eprom_w(struct net_device *dev, short bit)
>>> {
>>> u8 cmdreg;
>>>
>>> @@ -86,7 +86,7 @@ static void eprom_send_bits_string(struct net_device *dev, short b[], int len)
>>> {
>>> int i;
>>>
>>> - for(i=0; i<len; i++){
>>> + for (i = 0 ; i < len ; i++) {
>> I think it doesn't need to add a space between "i = 0" and ";".
>> just like below:
>> for (i = 0; i < len; i++) {
>>
>>> eprom_w(dev, b[i]);
>>> eprom_ck_cycle(dev);
>>> }
>>> @@ -96,50 +96,50 @@ static void eprom_send_bits_string(struct net_device *dev, short b[], int len)
>>> u32 eprom_read(struct net_device *dev, u32 addr)
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> - short read_cmd[]={1,1,0};
>>> + short read_cmd[] = {1, 1, 0};
>>> short addr_str[8];
>>> int i;
>>> int addr_len;
>>> u32 ret;
>>>
>>> - ret=0;
>>> - //enable EPROM programming
>>> + ret = 0;
>>> + /* enable EPROM programming */
>>> write_nic_byte_E(dev, EPROM_CMD,
>>> (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
>>> force_pci_posting(dev);
>>> udelay(EPROM_DELAY);
>>>
>>> - if (priv->epromtype==EPROM_93c56){
>>> - addr_str[7]=addr & 1;
>>> - addr_str[6]=addr & (1<<1);
>>> - addr_str[5]=addr & (1<<2);
>>> - addr_str[4]=addr & (1<<3);
>>> - addr_str[3]=addr & (1<<4);
>>> - addr_str[2]=addr & (1<<5);
>>> - addr_str[1]=addr & (1<<6);
>>> - addr_str[0]=addr & (1<<7);
>>> - addr_len=8;
>>> - }else{
>>> - addr_str[5]=addr & 1;
>>> - addr_str[4]=addr & (1<<1);
>>> - addr_str[3]=addr & (1<<2);
>>> - addr_str[2]=addr & (1<<3);
>>> - addr_str[1]=addr & (1<<4);
>>> - addr_str[0]=addr & (1<<5);
>>> - addr_len=6;
>>> + if (priv->epromtype == EPROM_93c56) {
>>> + addr_str[7] = addr & 1;
>>> + addr_str[6] = addr & (1<<1);
>>> + addr_str[5] = addr & (1<<2);
>>> + addr_str[4] = addr & (1<<3);
>>> + addr_str[3] = addr & (1<<4);
>>> + addr_str[2] = addr & (1<<5);
>>> + addr_str[1] = addr & (1<<6);
>>> + addr_str[0] = addr & (1<<7);
>>> + addr_len = 8;
>>> + } else {
>>> + addr_str[5] = addr & 1;
>>> + addr_str[4] = addr & (1<<1);
>>> + addr_str[3] = addr & (1<<2);
>>> + addr_str[2] = addr & (1<<3);
>>> + addr_str[1] = addr & (1<<4);
>>> + addr_str[0] = addr & (1<<5);
>>> + addr_len = 6;
>>> }
>>> eprom_cs(dev, 1);
>>> eprom_ck_cycle(dev);
>>> eprom_send_bits_string(dev, read_cmd, 3);
>>> eprom_send_bits_string(dev, addr_str, addr_len);
>>>
>>> - //keep chip pin D to low state while reading.
>>> - //I'm unsure if it is necessary, but anyway shouldn't hurt
>>> + /* keep chip pin D to low state while reading.*/
>>> + /* I'm unsure if it is necessary, but anyway shouldn't hurt*/
>>> eprom_w(dev, 0);
>>>
>>> - for(i=0;i<16;i++){
>>> - //eeprom needs a clk cycle between writing opcode&adr
>>> - //and reading data. (eeprom outs a dummy 0)
>>> + for (i = 0 ; i < 16 ; i++) {
>> same above my comment.
>>
>>> + /* eeprom needs a clk cycle between writing opcode&adr */
>>> + /* and reading data. (eeprom outs a dummy 0) */
>>> eprom_ck_cycle(dev);
>>> ret |= (eprom_r(dev)<<(15-i));
>>> }
>>> @@ -147,7 +147,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
>>> eprom_cs(dev, 0);
>>> eprom_ck_cycle(dev);
>>>
>>> - //disable EPROM programming
>>> + /* disable EPROM programming */
>>> write_nic_byte_E(dev, EPROM_CMD,
>>> (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
>>> return ret;
>>> diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
>>> index dab716f..5dd0654 100644
>>> --- a/drivers/staging/rtl8192u/r8192U_wx.c
>>> +++ b/drivers/staging/rtl8192u/r8192U_wx.c
>>> @@ -24,8 +24,8 @@
>>> #include "dot11d.h"
>>>
>>> #define RATE_COUNT 12
>>> -u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
>>> - 6000000,9000000,12000000,18000000,24000000,36000000,48000000,54000000};
>>> +u32 rtl8180_rates[] = {1000000, 2000000, 5500000, 11000000,
>>> + 6000000, 9000000, 12000000, 18000000, 24000000, 36000000, 48000000, 54000000};
>>>
>>>
>>> #ifndef ENETDOWN
>>> @@ -38,16 +38,16 @@ static int r8192_wx_get_freq(struct net_device *dev,
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>>
>>> - return ieee80211_wx_get_freq(priv->ieee80211,a,wrqu,b);
>>> + return ieee80211_wx_get_freq(priv->ieee80211, a, wrqu, b);
>>> }
>>>
>>>
>>> static int r8192_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
>>> union iwreq_data *wrqu, char *b)
>>> {
>>> - struct r8192_priv *priv=ieee80211_priv(dev);
>>> + struct r8192_priv *priv = ieee80211_priv(dev);
>>>
>>> - return ieee80211_wx_get_mode(priv->ieee80211,a,wrqu,b);
>>> + return ieee80211_wx_get_mode(priv->ieee80211, a, wrqu, b);
>>> }
>>>
>>>
>>> @@ -57,7 +57,8 @@ static int r8192_wx_get_rate(struct net_device *dev,
>>> union iwreq_data *wrqu, char *extra)
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> - return ieee80211_wx_get_rate(priv->ieee80211,info,wrqu,extra);
>>> +
>>> + return ieee80211_wx_get_rate(priv->ieee80211, info, wrqu, extra);
>>> }
>>>
>>>
>>> @@ -71,7 +72,7 @@ static int r8192_wx_set_rate(struct net_device *dev,
>>>
>>> down(&priv->wx_sem);
>>>
>>> - ret = ieee80211_wx_set_rate(priv->ieee80211,info,wrqu,extra);
>>> + ret = ieee80211_wx_set_rate(priv->ieee80211, info, wrqu, extra);
>>>
>>> up(&priv->wx_sem);
>>>
>>> @@ -88,7 +89,7 @@ static int r8192_wx_set_rts(struct net_device *dev,
>>>
>>> down(&priv->wx_sem);
>>>
>>> - ret = ieee80211_wx_set_rts(priv->ieee80211,info,wrqu,extra);
>>> + ret = ieee80211_wx_set_rts(priv->ieee80211, info, wrqu, extra);
>>>
>>> up(&priv->wx_sem);
>>>
>>> @@ -100,7 +101,7 @@ static int r8192_wx_get_rts(struct net_device *dev,
>>> union iwreq_data *wrqu, char *extra)
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> - return ieee80211_wx_get_rts(priv->ieee80211,info,wrqu,extra);
>>> + return ieee80211_wx_get_rts(priv->ieee80211, info, wrqu, extra);
>>> }
>>>
>>> static int r8192_wx_set_power(struct net_device *dev,
>>> @@ -112,7 +113,7 @@ static int r8192_wx_set_power(struct net_device *dev,
>>>
>>> down(&priv->wx_sem);
>>>
>>> - ret = ieee80211_wx_set_power(priv->ieee80211,info,wrqu,extra);
>>> + ret = ieee80211_wx_set_power(priv->ieee80211, info, wrqu, extra);
>>>
>>> up(&priv->wx_sem);
>>>
>>> @@ -124,7 +125,8 @@ static int r8192_wx_get_power(struct net_device *dev,
>>> union iwreq_data *wrqu, char *extra)
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> - return ieee80211_wx_get_power(priv->ieee80211,info,wrqu,extra);
>>> +
>>> + return ieee80211_wx_get_power(priv->ieee80211, info, wrqu, extra);
>>> }
>>>
>>> static int r8192_wx_force_reset(struct net_device *dev,
>>> @@ -135,7 +137,7 @@ static int r8192_wx_force_reset(struct net_device *dev,
>>>
>>> down(&priv->wx_sem);
>>>
>>> - printk("%s(): force reset ! extra is %d\n",__func__, *extra);
>>> + printk("%s(): force reset ! extra is %d\n", __func__, *extra);
>>> priv->force_reset = *extra;
>>> up(&priv->wx_sem);
>>> return 0;
>>> @@ -171,17 +173,17 @@ static int r8192_wx_set_crcmon(struct net_device *dev,
>>>
>>> down(&priv->wx_sem);
>>>
>>> - if(enable)
>>> - priv->crcmon=1;
>>> + if (enable)
>>> + priv->crcmon = 1;
>>> else
>>> - priv->crcmon=0;
>>> + priv->crcmon = 0;
>>>
>>> DMESG("bad CRC in monitor mode are %s",
>>> priv->crcmon ? "accepted" : "rejected");
>>>
>>> - if(prev != priv->crcmon && priv->up){
>>> - //rtl8180_down(dev);
>>> - //rtl8180_up(dev);
>>> + if (prev != priv->crcmon && priv->up) {
>>> + /*rtl8180_down(dev);*/
>>> + /*rtl8180_up(dev);*/
>>> }
>>>
>>> up(&priv->wx_sem);
>>> @@ -194,9 +196,10 @@ static int r8192_wx_set_mode(struct net_device *dev, struct iw_request_info *a,
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> int ret;
>>> +
>>> down(&priv->wx_sem);
>>>
>>> - ret = ieee80211_wx_set_mode(priv->ieee80211,a,wrqu,b);
>>> + ret = ieee80211_wx_set_mode(priv->ieee80211, a, wrqu, b);
>>>
>>> rtl8192_set_rxconf(dev);
>>>
>>> @@ -249,16 +252,16 @@ static int rtl8180_wx_get_range(struct net_device *dev,
>>> /* ~5 Mb/s real (802.11b) */
>>> range->throughput = 5 * 1000 * 1000;
>>>
>>> - // TODO: Not used in 802.11b?
>>> -// range->min_nwid; /* Minimal NWID we are able to set */
>>> - // TODO: Not used in 802.11b?
>>> -// range->max_nwid; /* Maximal NWID we are able to set */
>>> + /* TODO: Not used in 802.11b? */
>>> +/* range->min_nwid; */ /* Minimal NWID we are able to set */
>>> + /* TODO: Not used in 802.11b? */
>>> +/* range->max_nwid; */ /* Maximal NWID we are able to set */
>>>
>>> /* Old Frequency (backward compat - moved lower ) */
>>> -// range->old_num_channels;
>>> -// range->old_num_frequency;
>>> -// range->old_freq[6]; /* Filler to keep "version" at the same offset */
>>> - if(priv->rf_set_sens != NULL)
>>> +/* range->old_num_channels; */
>>> +/* range->old_num_frequency; */
>>> +/* range->old_freq[6]; */ /* Filler to keep "version" at the same offset */
>>> + if (priv->rf_set_sens != NULL)
>>> range->sensitivity = priv->max_sens; /* signal level threshold range */
>>>
>>> range->max_qual.qual = 100;
>>> @@ -281,7 +284,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
>>> range->min_frag = MIN_FRAG_THRESHOLD;
>>> range->max_frag = MAX_FRAG_THRESHOLD;
>>>
>>> - range->min_pmp=0;
>>> + range->min_pmp = 0;
>>> range->max_pmp = 5000000;
>>> range->min_pmt = 0;
>>> range->max_pmt = 65535*1000;
>>> @@ -292,30 +295,30 @@ static int rtl8180_wx_get_range(struct net_device *dev,
>>> range->we_version_compiled = WIRELESS_EXT;
>>> range->we_version_source = 16;
>>>
>>> -// range->retry_capa; /* What retry options are supported */
>>> -// range->retry_flags; /* How to decode max/min retry limit */
>>> -// range->r_time_flags; /* How to decode max/min retry life */
>>> -// range->min_retry; /* Minimal number of retries */
>>> -// range->max_retry; /* Maximal number of retries */
>>> -// range->min_r_time; /* Minimal retry lifetime */
>>> -// range->max_r_time; /* Maximal retry lifetime */
>>> +/* range->retry_capa; */ /* What retry options are supported */
>>> +/* range->retry_flags; */ /* How to decode max/min retry limit */
>>> +/* range->r_time_flags; */ /* How to decode max/min retry life */
>>> +/* range->min_retry; */ /* Minimal number of retries */
>>> +/* range->max_retry; */ /* Maximal number of retries */
>>> +/* range->min_r_time; */ /* Minimal retry lifetime */
>>> +/* range->max_r_time; */ /* Maximal retry lifetime */
>>>
>>>
>>> for (i = 0, val = 0; i < 14; i++) {
>>>
>>> - // Include only legal frequencies for some countries
>>> + /* Include only legal frequencies for some countries */
>>> if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
>>> range->freq[val].i = i + 1;
>>> range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
>>> range->freq[val].e = 1;
>>> val++;
>>> } else {
>>> - // FIXME: do we need to set anything for channels
>>> - // we don't use ?
>>> + /* FIXME: do we need to set anything for channels */
>>> + /* we don't use ? */
>>> }
>>>
>>> if (val == IW_MAX_FREQUENCIES)
>>> - break;
>>> + break;
>>> }
>>> range->num_frequency = val;
>>> range->num_channels = val;
>>> @@ -333,30 +336,28 @@ static int r8192_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
>>> struct ieee80211_device *ieee = priv->ieee80211;
>>> int ret = 0;
>>>
>>> - if(!priv->up) return -ENETDOWN;
>>> + if (!priv->up)
>>> + return -ENETDOWN;
>>>
>>> if (priv->ieee80211->LinkDetectInfo.bBusyTraffic == true)
>>> return -EAGAIN;
>>> - if (wrqu->data.flags & IW_SCAN_THIS_ESSID)
>>> - {
>>> + if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
>>> struct iw_scan_req *req = (struct iw_scan_req *)b;
>>> - if (req->essid_len)
>>> - {
>>> - //printk("==**&*&*&**===>scan set ssid:%s\n", req->essid);
>>> + if (req->essid_len) {
>>> + /* printk("==**&*&*&**===>scan set ssid:%s\n", req->essid); */
>> this dead code can be removed.
>>> ieee->current_network.ssid_len = req->essid_len;
>>> memcpy(ieee->current_network.ssid, req->essid, req->essid_len);
>>> - //printk("=====>network ssid:%s\n", ieee->current_network.ssid);
>>> + /* printk("=====>network ssid:%s\n", ieee->current_network.ssid); */
>> this dead code can be removed.
>>> }
>>> }
>>>
>>> down(&priv->wx_sem);
>>> - if(priv->ieee80211->state != IEEE80211_LINKED){
>>> + if (priv->ieee80211->state != IEEE80211_LINKED) {
>>> priv->ieee80211->scanning = 0;
>>> ieee80211_softmac_scan_syncro(priv->ieee80211);
>>> ret = 0;
>>> - }
>>> - else
>>> - ret = ieee80211_wx_set_scan(priv->ieee80211,a,wrqu,b);
>>> + } else
>>> + ret = ieee80211_wx_set_scan(priv->ieee80211, a, wrqu, b);
>> "if" has a curly brace and then "else" add brace also.
>>
>>> up(&priv->wx_sem);
>>> return ret;
>>> }
>>> @@ -369,11 +370,12 @@ static int r8192_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
>>> int ret;
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>>
>>> - if(!priv->up) return -ENETDOWN;
>>> + if (!priv->up)
>>> + return -ENETDOWN;
>>>
>>> down(&priv->wx_sem);
>>>
>>> - ret = ieee80211_wx_get_scan(priv->ieee80211,a,wrqu,b);
>>> + ret = ieee80211_wx_get_scan(priv->ieee80211, a, wrqu, b);
>>>
>>> up(&priv->wx_sem);
>>>
>>> @@ -386,9 +388,10 @@ static int r8192_wx_set_essid(struct net_device *dev,
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> int ret;
>>> +
>>> down(&priv->wx_sem);
>>>
>>> - ret = ieee80211_wx_set_essid(priv->ieee80211,a,wrqu,b);
>>> + ret = ieee80211_wx_set_essid(priv->ieee80211, a, wrqu, b);
>>>
>>> up(&priv->wx_sem);
>>>
>>> @@ -480,10 +483,11 @@ static int r8192_wx_set_wap(struct net_device *dev,
>>>
>>> int ret;
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> -// struct sockaddr *temp = (struct sockaddr *)awrq;
>>> +/* struct sockaddr *temp = (struct sockaddr *)awrq; */
>>> +
>>> down(&priv->wx_sem);
>>>
>>> - ret = ieee80211_wx_set_wap(priv->ieee80211,info,awrq,extra);
>>> + ret = ieee80211_wx_set_wap(priv->ieee80211, info, awrq, extra);
>>>
>>> up(&priv->wx_sem);
>>>
>>> @@ -498,7 +502,7 @@ static int r8192_wx_get_wap(struct net_device *dev,
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>>
>>> - return ieee80211_wx_get_wap(priv->ieee80211,info,wrqu,extra);
>>> + return ieee80211_wx_get_wap(priv->ieee80211, info, wrqu, extra);
>>> }
>>>
>>>
>>> @@ -519,35 +523,38 @@ static int r8192_wx_set_enc(struct net_device *dev,
>>> struct ieee80211_device *ieee = priv->ieee80211;
>>> int ret;
>>>
>>> - //u32 TargetContent;
>>> - u32 hwkey[4]={0,0,0,0};
>>> - u8 mask=0xff;
>>> - u32 key_idx=0;
>>> - //u8 broadcast_addr[6] ={ 0xff,0xff,0xff,0xff,0xff,0xff};
>>> - u8 zero_addr[4][6] ={ {0x00,0x00,0x00,0x00,0x00,0x00},
>>> - {0x00,0x00,0x00,0x00,0x00,0x01},
>>> - {0x00,0x00,0x00,0x00,0x00,0x02},
>>> - {0x00,0x00,0x00,0x00,0x00,0x03} };
>>> + /*u32 TargetContent; */
>>> + u32 hwkey[4] = {0, 0, 0, 0};
>>> + u8 mask = 0xff;
>>> + u32 key_idx = 0;
>>> + /*u8 broadcast_addr[6] ={ 0xff,0xff,0xff,0xff,0xff,0xff}; */
>> Is this really needed?
>>> + u8 zero_addr[4][6] = { {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
>>> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
>>> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
>>> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} };
>>> int i;
>>>
>>> - if(!priv->up) return -ENETDOWN;
>>> + if (!priv->up)
>>> + return -ENETDOWN;
>>>
>>> down(&priv->wx_sem);
>>>
>>> RT_TRACE(COMP_SEC, "Setting SW wep key");
>>> - ret = ieee80211_wx_set_encode(priv->ieee80211,info,wrqu,key);
>>> + ret = ieee80211_wx_set_encode(priv->ieee80211, info, wrqu, key);
>>>
>>> up(&priv->wx_sem);
>>>
>>>
>>>
>>> - //sometimes, the length is zero while we do not type key value
>>> - if(wrqu->encoding.length!=0){
>>> + /*sometimes, the length is zero while we do not type key value */
>>> + if (wrqu->encoding.length != 0) {
>>>
>>> - for(i=0 ; i<4 ; i++){
>>> + for (i = 0 ; i < 4 ; i++) {
>>> hwkey[i] |= key[4*i+0]&mask;
>>> - if(i==1&&(4*i+1)==wrqu->encoding.length) mask=0x00;
>>> - if(i==3&&(4*i+1)==wrqu->encoding.length) mask=0x00;
>>> + if (i == 1 && (4*i+1) == wrqu->encoding.length)
>>> + mask = 0x00;
>>> + if (i == 3 && (4*i+1) == wrqu->encoding.length)
>>> + mask = 0x00;
>> this "if" condition like below:
>> if (5 == wrqu->encoding.length || 13 == wrqu->encoding.length)
>> mask = 0x00;
>> and this should be outside "for" loop
>>
>>> hwkey[i] |= (key[4*i+1]&mask)<<8;
>>> hwkey[i] |= (key[4*i+2]&mask)<<16;
>>> hwkey[i] |= (key[4*i+3]&mask)<<24;
>>> @@ -556,43 +563,54 @@ static int r8192_wx_set_enc(struct net_device *dev,
>>> #define CONF_WEP40 0x4
>>> #define CONF_WEP104 0x14
>>>
>>> - switch (wrqu->encoding.flags & IW_ENCODE_INDEX){
>>> - case 0: key_idx = ieee->tx_keyidx; break;
>>> - case 1: key_idx = 0; break;
>>> - case 2: key_idx = 1; break;
>>> - case 3: key_idx = 2; break;
>>> - case 4: key_idx = 3; break;
>>> - default: break;
>>> + switch (wrqu->encoding.flags & IW_ENCODE_INDEX) {
>>> + case 0:
>>> + key_idx = ieee->tx_keyidx;
>>> + break;
>>> + case 1:
>>> + key_idx = 0;
>>> + break;
>>> + case 2:
>>> + key_idx = 1;
>>> + break;
>>> + case 3:
>>> + key_idx = 2;
>>> + break;
>>> + case 4:
>>> + key_idx = 3;
>>> + break;
>>> + default:
>>> + break;
>>> }
>>>
>>> - if(wrqu->encoding.length==0x5){
>>> + if (wrqu->encoding.length == 0x5) {
>>> ieee->pairwise_key_type = KEY_TYPE_WEP40;
>>> EnableHWSecurityConfig8192(dev);
>>>
>>> - setKey( dev,
>>> - key_idx, //EntryNo
>>> - key_idx, //KeyIndex
>>> - KEY_TYPE_WEP40, //KeyType
>>> + setKey(dev,
>>> + key_idx, /*EntryNo */
>>> + key_idx, /*KeyIndex */
>>> + KEY_TYPE_WEP40, /*KeyType */
>>> zero_addr[key_idx],
>>> - 0, //DefaultKey
>>> - hwkey); //KeyContent
>>> + 0, /*DefaultKey */
>>> + hwkey); /*KeyContent */
>>>
>>> }
>>>
>>> - else if(wrqu->encoding.length==0xd){
>>> + else if (wrqu->encoding.length == 0xd) {
>>> ieee->pairwise_key_type = KEY_TYPE_WEP104;
>>> EnableHWSecurityConfig8192(dev);
>>>
>>> - setKey( dev,
>>> - key_idx, //EntryNo
>>> - key_idx, //KeyIndex
>>> - KEY_TYPE_WEP104, //KeyType
>>> + setKey(dev,
>>> + key_idx, /*EntryNo */
>>> + key_idx, /*KeyIndex */
>>> + KEY_TYPE_WEP104, /*KeyType */
>>> zero_addr[key_idx],
>>> - 0, //DefaultKey
>>> - hwkey); //KeyContent
>>> + 0, /*DefaultKey */
>>> + hwkey); /*KeyContent */
>>>
>>> - }
>>> - else printk("wrong type in WEP, not WEP40 and WEP104\n");
>>> + } else
>>> + printk("wrong type in WEP, not WEP40 and WEP104\n");
>>>
>>> }
>>>
>>> @@ -600,12 +618,12 @@ static int r8192_wx_set_enc(struct net_device *dev,
>>> }
>>>
>>>
>>> -static int r8192_wx_set_scan_type(struct net_device *dev, struct iw_request_info *aa, union
>>> - iwreq_data *wrqu, char *p){
>>> +static int r8192_wx_set_scan_type(struct net_device *dev, struct iw_request_info *aa,
>>> + union iwreq_data *wrqu, char *p){
>>>
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> - int *parms=(int *)p;
>>> - int mode=parms[0];
>>> + int *parms = (int *)p;
>>> + int mode = parms[0];
>>>
>>> priv->ieee80211->active_scan = mode;
>>>
>>> @@ -624,24 +642,24 @@ static int r8192_wx_set_retry(struct net_device *dev,
>>> down(&priv->wx_sem);
>>>
>>> if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
>>> - wrqu->retry.disabled){
>>> + wrqu->retry.disabled) {
>>> err = -EINVAL;
>>> goto exit;
>>> }
>>> - if (!(wrqu->retry.flags & IW_RETRY_LIMIT)){
>>> + if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) {
>>> err = -EINVAL;
>>> goto exit;
>>> }
>>>
>>> - if(wrqu->retry.value > R8180_MAX_RETRY){
>>> - err= -EINVAL;
>>> + if (wrqu->retry.value > R8180_MAX_RETRY) {
>>> + err = -EINVAL;
>>> goto exit;
>>> }
>>> if (wrqu->retry.flags & IW_RETRY_MAX) {
>>> priv->retry_rts = wrqu->retry.value;
>>> DMESG("Setting retry for RTS/CTS data to %d", wrqu->retry.value);
>>>
>>> - }else {
>>> + } else {
>>> priv->retry_data = wrqu->retry.value;
>>> DMESG("Setting retry for non RTS/CTS data to %d", wrqu->retry.value);
>>> }
>>> @@ -687,7 +705,7 @@ static int r8192_wx_get_retry(struct net_device *dev,
>>> wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
>>> wrqu->retry.value = priv->retry_data;
>>> }
>>> - //printk("returning %d",wrqu->retry.value);
>>> + /* printk("returning %d",wrqu->retry.value); */
>>>
>>>
>>> return 0;
>>> @@ -698,7 +716,8 @@ static int r8192_wx_get_sens(struct net_device *dev,
>>> union iwreq_data *wrqu, char *extra)
>>> {
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> - if(priv->rf_set_sens == NULL)
>>> +
>>> + if (priv->rf_set_sens == NULL)
>>> return -1; /* we have not this support for this radio */
>>> wrqu->sens.value = priv->sens;
>>> return 0;
>>> @@ -714,15 +733,15 @@ static int r8192_wx_set_sens(struct net_device *dev,
>>>
>>> short err = 0;
>>> down(&priv->wx_sem);
>>> - //DMESG("attempt to set sensivity to %ddb",wrqu->sens.value);
>>> - if(priv->rf_set_sens == NULL) {
>>> - err= -1; /* we have not this support for this radio */
>>> + /*DMESG("attempt to set sensivity to %ddb",wrqu->sens.value);*/
>>> + if (priv->rf_set_sens == NULL) {
>>> + err = -1; /* we have not this support for this radio */
>>> goto exit;
>>> }
>>> - if(priv->rf_set_sens(dev, wrqu->sens.value) == 0)
>>> + if (priv->rf_set_sens(dev, wrqu->sens.value) == 0)
>>> priv->sens = wrqu->sens.value;
>>> else
>>> - err= -EINVAL;
>>> + err = -EINVAL;
>>>
>>> exit:
>>> up(&priv->wx_sem);
>>> @@ -730,77 +749,72 @@ exit:
>>> return err;
>>> }
>>>
>>> -//hw security need to reorganized.
>>> +/*hw security need to reorganized. */
>>> static int r8192_wx_set_enc_ext(struct net_device *dev,
>>> struct iw_request_info *info,
>>> union iwreq_data *wrqu, char *extra)
>>> {
>>> - int ret=0;
>>> + int ret = 0;
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> struct ieee80211_device *ieee = priv->ieee80211;
>>> - //printk("===>%s()\n", __func__);
>>> +
>>> + /* printk("===>%s()\n", __func__); */
>> this line can be removed.
>>>
>>>
>>> down(&priv->wx_sem);
>>> ret = ieee80211_wx_set_encode_ext(priv->ieee80211, info, wrqu, extra);
>>>
>>> {
>>> - u8 broadcast_addr[6] = {0xff,0xff,0xff,0xff,0xff,0xff};
>>> + u8 broadcast_addr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
>>> u8 zero[6] = {0};
>>> u32 key[4] = {0};
>>> struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
>>> struct iw_point *encoding = &wrqu->encoding;
>>> u8 idx = 0, alg = 0, group = 0;
>>> if ((encoding->flags & IW_ENCODE_DISABLED) ||
>>> - ext->alg == IW_ENCODE_ALG_NONE) //none is not allowed to use hwsec WB 2008.07.01
>>> + ext->alg == IW_ENCODE_ALG_NONE) /*none is not allowed to use hwsec WB 2008.07.01 */
>> over 80 character.
>>> goto end_hw_sec;
>>>
>>> - alg = (ext->alg == IW_ENCODE_ALG_CCMP)?KEY_TYPE_CCMP:ext->alg; // as IW_ENCODE_ALG_CCMP is defined to be 3 and KEY_TYPE_CCMP is defined to 4;
>>> + alg = (ext->alg == IW_ENCODE_ALG_CCMP)?KEY_TYPE_CCMP:ext->alg; /* as IW_ENCODE_ALG_CCMP is defined to be 3 and KEY_TYPE_CCMP is defined to 4; */
>> over 80 character in a line.
>>
>>> idx = encoding->flags & IW_ENCODE_INDEX;
>>> if (idx)
>>> - idx --;
>>> + idx--;
>>> group = ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY;
>>>
>>> - if ((!group) || (IW_MODE_ADHOC == ieee->iw_mode) || (alg == KEY_TYPE_WEP40))
>>> - {
>>> - if ((ext->key_len == 13) && (alg == KEY_TYPE_WEP40) )
>>> + if ((!group) || (IW_MODE_ADHOC == ieee->iw_mode) || (alg == KEY_TYPE_WEP40)) {
>>> + if ((ext->key_len == 13) && (alg == KEY_TYPE_WEP40))
>>> alg = KEY_TYPE_WEP104;
>>> ieee->pairwise_key_type = alg;
>>> EnableHWSecurityConfig8192(dev);
>>> }
>>> - memcpy((u8 *)key, ext->key, 16); //we only get 16 bytes key.why? WB 2008.7.1
>>> -
>>> - if ((alg & KEY_TYPE_WEP40) && (ieee->auth_mode !=2) )
>>> - {
>>> -
>>> - setKey( dev,
>>> - idx,//EntryNo
>>> - idx, //KeyIndex
>>> - alg, //KeyType
>>> - zero, //MacAddr
>>> - 0, //DefaultKey
>>> - key); //KeyContent
>>> - }
>>> - else if (group)
>>> - {
>>> + memcpy((u8 *)key, ext->key, 16); /*we only get 16 bytes key.why? WB 2008.7.1 */
>>> +
>>> + if ((alg & KEY_TYPE_WEP40) && (ieee->auth_mode != 2)) {
>>> +
>>> + setKey(dev,
>>> + idx,/*EntryNo */
>>> + idx, /*KeyIndex */
>>> + alg, /*KeyType */
>>> + zero, /*MacAddr */
>>> + 0, /*DefaultKey */
>>> + key); /*KeyContent */
>>> + } else if (group) {
>>> ieee->group_key_type = alg;
>>> - setKey( dev,
>>> - idx,//EntryNo
>>> - idx, //KeyIndex
>>> - alg, //KeyType
>>> - broadcast_addr, //MacAddr
>>> - 0, //DefaultKey
>>> - key); //KeyContent
>>> - }
>>> - else //pairwise key
>>> - {
>>> - setKey( dev,
>>> - 4,//EntryNo
>>> - idx, //KeyIndex
>>> - alg, //KeyType
>>> - (u8 *)ieee->ap_mac_addr, //MacAddr
>>> - 0, //DefaultKey
>>> - key); //KeyContent
>>> + setKey(dev,
>>> + idx,/*EntryNo */
>>> + idx, /*KeyIndex */
>>> + alg, /*KeyType */
>>> + broadcast_addr, /*MacAddr */
>>> + 0, /*DefaultKey */
>>> + key); /*KeyContent */
>>> + } else /*pairwise key */ {
>>> + setKey(dev,
>>> + 4,/*EntryNo */
>>> + idx, /*KeyIndex */
>>> + alg, /*KeyType */
>>> + (u8 *)ieee->ap_mac_addr, /*MacAddr */
>>> + 0, /*DefaultKey */
>>> + key); /*KeyContent */
>>> }
>>>
>>>
>>> @@ -816,9 +830,10 @@ static int r8192_wx_set_auth(struct net_device *dev,
>>> struct iw_request_info *info,
>>> union iwreq_data *data, char *extra)
>>> {
>>> - int ret=0;
>>> - //printk("====>%s()\n", __func__);
>>> + int ret = 0;
>>> + /*printk("====>%s()\n", __func__); */
>> remove.
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> +
>>> down(&priv->wx_sem);
>>> ret = ieee80211_wx_set_auth(priv->ieee80211, info, &(data->param), extra);
>>> up(&priv->wx_sem);
>>> @@ -829,10 +844,11 @@ static int r8192_wx_set_mlme(struct net_device *dev,
>>> struct iw_request_info *info,
>>> union iwreq_data *wrqu, char *extra)
>>> {
>>> - //printk("====>%s()\n", __func__);
>>> + /*printk("====>%s()\n", __func__); */
>> remove.
>>>
>>> - int ret=0;
>>> + int ret = 0;
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> +
>>> down(&priv->wx_sem);
>>> ret = ieee80211_wx_set_mlme(priv->ieee80211, info, wrqu, extra);
>>>
>>> @@ -844,27 +860,27 @@ static int r8192_wx_set_gen_ie(struct net_device *dev,
>>> struct iw_request_info *info,
>>> union iwreq_data *data, char *extra)
>>> {
>>> - //printk("====>%s(), len:%d\n", __func__, data->length);
>>> - int ret=0;
>>> + /*printk("====>%s(), len:%d\n", __func__, data->length); */
>> remove.
>>> + int ret = 0;
>>> struct r8192_priv *priv = ieee80211_priv(dev);
>>> +
>>> down(&priv->wx_sem);
>>> ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, data->data.length);
>>> up(&priv->wx_sem);
>>> - //printk("<======%s(), ret:%d\n", __func__, ret);
>>> + /*printk("<======%s(), ret:%d\n", __func__, ret); */
>> remove this.
>>> return ret;
>>>
>>>
>>> }
>>>
>>> static int dummy(struct net_device *dev, struct iw_request_info *a,
>>> - union iwreq_data *wrqu,char *b)
>>> + union iwreq_data *wrqu, char *b)
>>> {
>>> return -1;
>>> }
>>>
>>>
>>> -static iw_handler r8192_wx_handlers[] =
>>> -{
>>> +static iw_handler r8192_wx_handlers[] = {
>>> NULL, /* SIOCSIWCOMMIT */
>>> r8192_wx_get_name, /* SIOCGIWNAME */
>>> dummy, /* SIOCSIWNWID */
>>> @@ -913,13 +929,13 @@ static iw_handler r8192_wx_handlers[] =
>>> r8192_wx_get_power, /* SIOCGIWPOWER */
>>> NULL, /*---hole---*/
>>> NULL, /*---hole---*/
>>> - r8192_wx_set_gen_ie,//NULL, /* SIOCSIWGENIE */
>>> + r8192_wx_set_gen_ie,/*NULL, */ /* SIOCSIWGENIE */
>>> NULL, /* SIOCSIWGENIE */
>>>
>>> - r8192_wx_set_auth,//NULL, /* SIOCSIWAUTH */
>>> - NULL,//r8192_wx_get_auth,//NULL, /* SIOCSIWAUTH */
>>> + r8192_wx_set_auth,/*NULL, */ /* SIOCSIWAUTH */
>>> + NULL,/*r8192_wx_get_auth,*//*NULL,*/ /* SIOCSIWAUTH */
>>> r8192_wx_set_enc_ext, /* SIOCSIWENCODEEXT */
>>> - NULL,//r8192_wx_get_enc_ext,//NULL, /* SIOCSIWENCODEEXT */
>>> + NULL,/*r8192_wx_get_enc_ext,*//*NULL,*/ /* SIOCSIWENCODEEXT */
>>> NULL, /* SIOCSIWPMKSA */
>>> NULL, /*---hole---*/
>>>
>>> @@ -952,27 +968,26 @@ static const struct iw_priv_args r8192_private_args[] = {
>>>
>>>
>>> static iw_handler r8192_private_handler[] = {
>>> -// r8192_wx_set_monitor, /* SIOCIWFIRSTPRIV */
>>> +/* r8192_wx_set_monitor, *//* SIOCIWFIRSTPRIV */
>>> r8192_wx_set_crcmon, /*SIOCIWSECONDPRIV*/
>>> -// r8192_wx_set_forceassociate,
>>> -// r8192_wx_set_beaconinterval,
>>> -// r8192_wx_set_monitor_type,
>>> +/* r8192_wx_set_forceassociate, */
>>> +/* r8192_wx_set_beaconinterval, */
>>> +/* r8192_wx_set_monitor_type, */
>>> r8192_wx_set_scan_type,
>>> r8192_wx_set_rawtx,
>>> - //r8192_wx_null,
>>> + /*r8192_wx_null, */
>>> r8192_wx_force_reset,
>>> };
>>>
>>> struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
>>> {
>>> - struct r8192_priv *priv = ieee80211_priv(dev);
>>> + struct r8192_priv *priv = ieee80211_priv(dev);
>>> struct ieee80211_device *ieee = priv->ieee80211;
>>> struct iw_statistics *wstats = &priv->wstats;
>>> int tmp_level = 0;
>>> int tmp_qual = 0;
>>> int tmp_noise = 0;
>>> - if(ieee->state < IEEE80211_LINKED)
>>> - {
>>> + if (ieee->state < IEEE80211_LINKED) {
>>> wstats->qual.qual = 0;
>>> wstats->qual.level = 0;
>>> wstats->qual.noise = 0;
>>> @@ -980,20 +995,20 @@ struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
>>> return wstats;
>>> }
>>>
>>> - tmp_level = (&ieee->current_network)->stats.rssi;
>>> + tmp_level = (&ieee->current_network)->stats.rssi;
>>> tmp_qual = (&ieee->current_network)->stats.signal;
>>> tmp_noise = (&ieee->current_network)->stats.noise;
>>> - //printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise);
>>> + /*printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise); */
>>>
>>> wstats->qual.level = tmp_level;
>>> wstats->qual.qual = tmp_qual;
>>> wstats->qual.noise = tmp_noise;
>>> - wstats->qual.updated = IW_QUAL_ALL_UPDATED| IW_QUAL_DBM;
>>> + wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
>>> return wstats;
>>> }
>>>
>>>
>>> -struct iw_handler_def r8192_wx_handlers_def={
>>> +struct iw_handler_def r8192_wx_handlers_def = {
>>> .standard = r8192_wx_handlers,
>>> .num_standard = ARRAY_SIZE(r8192_wx_handlers),
>>> .private = r8192_private_handler,
>>> --
>>> 1.7.9.5
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/