[PATCH 3.12 071/103] tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled

[Jiri Slaby]

From: Ivan Vecera <ivecera@xxxxxxxxxx>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

The patch fixes a problem with dropped jumbo frames after usage of
'ethtool -G ... rx'.

Scenario:
1. ip link set eth0 up
2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo
3. ip link set mtu 9000 dev eth0

The ethtool command set rx_jumbo_pending to zero so any received jumbo
packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N'
to workaround the issue.
The patch changes the logic so rx_jumbo_pending value is changed only if
jumbo frames are enabled (MTU > 1500).

Signed-off-by: Ivan Vecera <ivecera@xxxxxxxxxx>
Acked-by: Michael Chan <mchan@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
 drivers/net/ethernet/broadcom/tg3.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index aae7ba66e7bb..65a058967cbb 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -12197,7 +12197,9 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
 	if (tg3_flag(tp, MAX_RXPEND_64) &&
 	    tp->rx_pending > 63)
 		tp->rx_pending = 63;
-	tp->rx_jumbo_pending = ering->rx_jumbo_pending;
+
+	if (tg3_flag(tp, JUMBO_RING_ENABLE))
+		tp->rx_jumbo_pending = ering->rx_jumbo_pending;
 
 	for (i = 0; i < tp->irq_max; i++)
 		tp->napi[i].tx_pending = ering->tx_pending;
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/