[GIT PULL] First round of SCSI updates for the 3.15+ merge window
From: James Bottomley
Date: Mon Jun 09 2014 - 11:02:14 EST
This patch consists of the usual driver updates (qla2xxx, qla4xxx, lpfc,
be2iscsi, fnic, ufs, NCR5380) The NCR5380 is the addition to maintained
status of a long neglected driver for older hardware. In addition there
are a lot of minor fixes and cleanups and some more updates to make scsi
mq ready.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-for-linus
The short changelog is:
Adheer Chandravanshi (2):
qla4xxx: Fix smatch warning in func qla4xxx_conn_get_param
qla4xxx: Fix smatch warning in func qla4xxx_get_ep_param
Alexey Khoroshilov (1):
bfa: allocate memory with GFP_ATOMIC in spinlock context
Armen Baloyan (3):
qla2xxx: Adjust adapter reset routine to the changes in firmware specification for ISPFx00.
qla2xxx: Decrease pci access for response queue processing for ISPFX00.
qla2xxx: Change copyright year to 2014 in all the source files.
Atul Deshmukh (3):
qla2xxx: IOCB data should be copied to I/O mem using memcpy_toio.
qla2xxx: Include <delay.h> file for msleep declartion in qla_nx2.c file.
qla2xxx: Use proper log message for flash lock failed error.
Ben Hutchings (1):
mvsas: Recognise device/subsystem 9485/9485 as 88SE9485
Benoit Taine (2):
qla2xxx: Use kmemdup instead of kmalloc + memcpy
qla4xxx: Use kmemdup instead of kmalloc + memcpy
Chad Dupuis (7):
qla2xxx: Remove wait for online from host reset handler.
qla2xxx: Do logins from a chip reset in DPC thread instead of the error handler thread.
qla2xxx: Reduce the time we wait for a command to complete during SCSI error handling.
qla2xxx: Clear loop_id for ports that are marked lost during fabric scanning.
qla2xxx: Avoid escalating the SCSI error handler if the command is not found in firmware.
qla2xxx: Remove unnecessary printk_ratelimited from qla_nx2.c
qla2xxx: Do not schedule reset when one is already active when receiving an invalid status handle.
Christoph Hellwig (7):
Revert "be2iscsi: Fix processing cqe for cxn whose endpoint is freed"
scsi_debug: simple short transfer injection
virtio_scsi: use cmd_size
scsi: handle command allocation failure in scsi_reset_provider
scsi: reintroduce scsi_driver.init_command
scsi: remove scsi_end_request
scsi: explicitly release bidi buffers
Dan Carpenter (1):
qla2xxx: fix incorrect debug printk
David Jeffery (1):
sd: medium access timeout counter fails to reset
Fabian Frederick (1):
include/scsi/osd_protocol.h: remove unnecessary __constant
Finn Thain (14):
scsi/NCR5380: dprintk macro
scsi/NCR5380: merge sun3_scsi_vme.c into sun3_scsi.c
scsi/NCR5380: reduce depth of sun3_scsi nested includes
scsi/NCR5380: remove unused macro definitions
scsi/NCR5380: fix and standardize NDEBUG macros
scsi/NCR5380: adopt dprintk()
scsi/NCR5380: adopt NCR5380_dprint() and NCR5380_dprint_phase()
scsi/NCR5380: fix dprintk macro usage and definition
scsi/NCR5380: fix build failures when debugging is enabled
scsi/NCR5380: use NCR5380_dprint() instead of NCR5380_print()
scsi/NCR5380: remove old CVS keywords
scsi/NCR5380: remove redundant HOSTS_C macro tests
scsi/NCR5380: remove unused BOARD_NORMAL and BOARD_NCR53C400
MAINTAINERS: add an entry for all the NCR5380 drivers
Giridhar Malavali (3):
qla2xxx: Check for peg alive counter and clear any outstanding mailbox command.
qla2xxx: Issue abort command for outstanding commands during cleanup when only firmware is alive.
qla2xxx: Log when device state is moved to failed state.
Hannes Reinecke (1):
scsi: set correct completion code in scsi_send_eh_cmnd()
Himanshu Madani (1):
qla2xxx: Fix beacon blink logic for ISP26xx/83xx.
Himanshu Madhani (1):
qla2xxx: Remove mapped vp index iterator macro dead code.
Hiral Patel (5):
qla2xxx: Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the owner of the reset.
qla2xxx: Enable fw_dump_size for ISP8044.
qla2xxx: Introduce fw_dump_flag to track fw dump progress.
qla2xxx: Remove unnecessary delays from fw dump code path.
qla2xxx: Track the process when the ROM_LOCK failure happens
Hiral Shah (3):
fnic: fnic Control Path Trace Utility
fnic: Failing to queue aborts due to Q full cause terminate driver timeout
fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle count
James Smart (1):
lpfc: Add iotag memory barrier
Jayamohan Kallickal (8):
be2iscsi: Bump the driver version
be2iscsi: Fix processing cqe for cxn whose endpoint is freed
be2iscsi: Fix destroy MCC-CQ before MCC-EQ is destroyed
be2iscsi: Fix memory corruption in MBX path
be2iscsi: Fix TCP parameters while connection offloading.
be2iscsi: Fix interrupt Coalescing mechanism.
be2iscsi: Fix exposing Host in sysfs after adapter initialization is complete
be2iscsi: Fix retrieving MCCQ_WRB in non-embedded Mbox path
Joe Carnuccio (11):
qla2xxx: Add MBC option for fast SFP data access.
qla2xxx: ISP27xx queue index shadow registers.
qla2xxx: ISP27xx firmware dump template spec updates (including T274).
qla2xxx: ISP8044 poll ipmdio bus timeout improvement.
qla2xxx: Update entry type 270 to match spec update.
qla2xxx: Correction to ISP27xx template entry types 256 and 258.
qla2xxx: Add ISP8044 serdes bsg interface.
qla2xxx: Add pci device id 0x2271.
qla2xxx: Correct ISP83xx/ISP27xx mislogic in setting out_mb in qla25xx_init_req_que().
qla2xxx: Allow ISP83XX and ISP27XX both to write req_q_out register.
qla2xxx: Correct operations for ISP27xx template types 270 and 271.
Joe Handzik (5):
hpsa: fix bad comparison of signed with unsigned in hpsa_update_scsi_devices
hpsa: do not ignore failure of sense controller parameters command
hpsa: fix memory leak in hpsa_hba_mode_enabled
hpsa: add new Smart Array PCI IDs (May 2014)
hpsa: Checking for a NULL return from a kzalloc call
Marek Vasut (1):
esas2r: Fix comment
Mathias Krause (1):
aic79xx: fix misuse of static variables
Matthew Wilcox (7):
fusion: Remove use of DEF_SCSI_QCMD
fusion: Add free msg frames to the head, not tail of list
mpt2sas: Add free smids to the head, not tail of list
mpt2sas: Remove use of DEF_SCSI_QCMD
mpt2sas: Remove uses of serial_number
mpt3sas: Remove use of DEF_SCSI_QCMD
mpt3sas: Remove uses of serial_number
Maurizio Lombardi (3):
bnx2fc: fix memory leak in bnx2fc_allocate_hash_table()
bnx2fc: fix memory leak and potential NULL pointer dereference.
bnx2fc: remove unused variable hash_table_size
Michael Schmitz (1):
m68k/atari - atari_scsi: change abort/reset return codes
Ming Lei (1):
virtio_scsi: remove ACCESS_ONCE() and smp_read_barrier_depends()
Nathan Fontenot (1):
Update Maintainers for IBM Power 842, vscsi, and vfc drivers
Nilesh Javali (2):
qla4xxx: Fix memory leak for ha->saved_acb
qla4xxx: Export sysfs DDBs from DPC handler
Paul Bolle (1):
acornscsi: remove linked command support
Pratik Mohanty (1):
qla2xxx: Support of new firmware dump opcodes QLA8044_RDDFE(38), QLA8044_RDMDIO(39),QLA8044_POLLWR(40).
Quinn Tran (2):
qla2xxx: ABTS cause double free of qla_tgt_cmd +.
qla2xxx: T10-Dif: add T10-PI support
Saurav Kashyap (3):
qla2xxx: Update the driver version to 8.07.00.08-k.
qla2xxx: Allow the next firmware dump if the previous dump capture fails for ISP8044.
qla2xxx: Wait for reset completion without lock for ISPFX00.
Sawan Chandak (1):
qla2xxx: Delay driver unload if there is any pending activity going on.
Shlomo Pongratz (1):
scsi/libiscsi: Fix static checker warning on bh locking
Sujit Reddy Thumma (6):
scsi: ufs: Improve UFS fatal error handling
scsi: ufs: Fix device and host reset methods
scsi: ufs: Fix hardware race conditions while aborting a command
scsi: ufs: Fix broken task management command implementation
scsi: ufs: make undeclared functions static
scsi: ufs: fix endianness sparse warnings
Suresh Thiagarajan (1):
pm80xx : Fix missing NULL pointer checks and memory leaks
Tej Parkash (6):
qla4xxx: Disable INTx interrupt for ISP82XX
qla4xxx: Added PEX DMA Support for ISP8022 Adapter
qla4xxx: Added new opcodes for 84XX Minidump template
qla4xxx: Add support of 0xFF capture mask for minidump
qla4xxx: Change default capture to firmware defined capture mask
qla4xxx: Do not wait for IO completion, after issuing stop_firmware
Tej Prakash (1):
qla2xxx: Don't check for firmware hung during the reset context for ISP82XX.
Tomas Henzl (2):
mptfusion: fix msgContext in mptctl_hp_hostinfo
megaraid_sas: fix a small problem when reading state value from hw
Vikas Chaudhary (6):
qla4xxx: Update driver version to 5.04.00-k6
qla4xxx: Update driver version to 5.04.00-k5
qla4xxx: Fix memory leak in func qla4_84xx_config_acb()
qla4xxx: Initialize hardware queue for ISP40XX
qla4xxx: Check for correct return status
qla4xxx: qla4xxx: Move qla4_8xxx_ms_mem_write_128b to ql4_nx.c
and the diffstat
Documentation/scsi/LICENSE.qla2xxx | 2 +-
MAINTAINERS | 38 +-
drivers/message/fusion/mptbase.c | 2 +-
drivers/message/fusion/mptctl.c | 6 +-
drivers/message/fusion/mptfc.c | 12 +-
drivers/message/fusion/mptsas.c | 10 +-
drivers/message/fusion/mptscsih.c | 8 +-
drivers/message/fusion/mptscsih.h | 2 +-
drivers/message/fusion/mptspi.c | 12 +-
drivers/scsi/NCR5380.c | 137 +++---
drivers/scsi/NCR5380.h | 32 +-
drivers/scsi/aic7xxx/aic79xx_pci.c | 18 +-
drivers/scsi/arm/acornscsi.c | 53 ---
drivers/scsi/arm/cumana_1.c | 3 -
drivers/scsi/arm/oak.c | 3 -
drivers/scsi/atari_NCR5380.c | 193 ++++----
drivers/scsi/atari_scsi.c | 24 +-
drivers/scsi/atari_scsi.h | 119 -----
drivers/scsi/be2iscsi/be.h | 11 +
drivers/scsi/be2iscsi/be_cmds.h | 31 +-
drivers/scsi/be2iscsi/be_iscsi.c | 12 +-
drivers/scsi/be2iscsi/be_main.c | 82 +++-
drivers/scsi/be2iscsi/be_main.h | 7 +-
drivers/scsi/be2iscsi/be_mgmt.c | 64 ++-
drivers/scsi/be2iscsi/be_mgmt.h | 2 +
drivers/scsi/bfa/bfad.c | 2 +-
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 64 +--
drivers/scsi/dtc.c | 2 -
drivers/scsi/esas2r/esas2r_main.c | 2 +-
drivers/scsi/fnic/fnic.h | 5 +-
drivers/scsi/fnic/fnic_debugfs.c | 238 ++++++++--
drivers/scsi/fnic/fnic_fcs.c | 61 ++-
drivers/scsi/fnic/fnic_main.c | 23 +-
drivers/scsi/fnic/fnic_scsi.c | 13 +-
drivers/scsi/fnic/fnic_trace.c | 326 +++++++++++++-
drivers/scsi/fnic/fnic_trace.h | 38 ++
drivers/scsi/g_NCR5380.c | 4 -
drivers/scsi/g_NCR5380.h | 7 -
drivers/scsi/hpsa.c | 31 +-
drivers/scsi/hpsa.h | 1 +
drivers/scsi/libiscsi.c | 4 +-
drivers/scsi/lpfc/lpfc_sli.c | 21 +
drivers/scsi/mac_scsi.c | 10 -
drivers/scsi/mac_scsi.h | 10 -
drivers/scsi/megaraid/megaraid_sas_base.c | 15 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 8 +-
drivers/scsi/mpt2sas/mpt2sas_base.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 2 +-
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 24 +-
drivers/scsi/mpt3sas/mpt3sas_base.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 24 +-
drivers/scsi/mvsas/mv_init.c | 9 +
drivers/scsi/pas16.h | 3 -
drivers/scsi/pm8001/pm8001_ctl.c | 3 +
drivers/scsi/qla2xxx/qla_attr.c | 6 +-
drivers/scsi/qla2xxx/qla_bsg.c | 49 +-
drivers/scsi/qla2xxx/qla_bsg.h | 9 +-
drivers/scsi/qla2xxx/qla_dbg.c | 127 +++---
drivers/scsi/qla2xxx/qla_dbg.h | 5 +-
drivers/scsi/qla2xxx/qla_def.h | 44 +-
drivers/scsi/qla2xxx/qla_dfs.c | 2 +-
drivers/scsi/qla2xxx/qla_fw.h | 14 +-
drivers/scsi/qla2xxx/qla_gbl.h | 14 +-
drivers/scsi/qla2xxx/qla_gs.c | 2 +-
drivers/scsi/qla2xxx/qla_init.c | 53 +--
drivers/scsi/qla2xxx/qla_inline.h | 15 +-
drivers/scsi/qla2xxx/qla_iocb.c | 148 ++++--
drivers/scsi/qla2xxx/qla_isr.c | 23 +-
drivers/scsi/qla2xxx/qla_mbx.c | 96 +++-
drivers/scsi/qla2xxx/qla_mid.c | 2 +-
drivers/scsi/qla2xxx/qla_mr.c | 64 ++-
drivers/scsi/qla2xxx/qla_mr.h | 3 +-
drivers/scsi/qla2xxx/qla_nx.c | 87 ++--
drivers/scsi/qla2xxx/qla_nx.h | 6 +-
drivers/scsi/qla2xxx/qla_nx2.c | 510 +++++++++++++++++----
drivers/scsi/qla2xxx/qla_nx2.h | 50 ++-
drivers/scsi/qla2xxx/qla_os.c | 105 +++--
drivers/scsi/qla2xxx/qla_settings.h | 2 +-
drivers/scsi/qla2xxx/qla_sup.c | 9 +-
drivers/scsi/qla2xxx/qla_target.c | 650 +++++++++++++++++++++++++--
drivers/scsi/qla2xxx/qla_target.h | 84 +++-
drivers/scsi/qla2xxx/qla_tmpl.c | 91 +++-
drivers/scsi/qla2xxx/qla_tmpl.h | 17 +-
drivers/scsi/qla2xxx/qla_version.h | 4 +-
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 41 +-
drivers/scsi/qla4xxx/ql4_83xx.c | 106 +----
drivers/scsi/qla4xxx/ql4_83xx.h | 44 ++
drivers/scsi/qla4xxx/ql4_def.h | 1 +
drivers/scsi/qla4xxx/ql4_fw.h | 4 +
drivers/scsi/qla4xxx/ql4_glbl.h | 3 +-
drivers/scsi/qla4xxx/ql4_init.c | 32 +-
drivers/scsi/qla4xxx/ql4_isr.c | 12 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 8 +-
drivers/scsi/qla4xxx/ql4_nx.c | 458 ++++++++++++++++++-
drivers/scsi/qla4xxx/ql4_nx.h | 3 +
drivers/scsi/qla4xxx/ql4_os.c | 41 +-
drivers/scsi/qla4xxx/ql4_version.h | 2 +-
drivers/scsi/scsi_debug.c | 8 +
drivers/scsi/scsi_error.c | 7 +
drivers/scsi/scsi_lib.c | 225 ++++------
drivers/scsi/sd.c | 48 +-
drivers/scsi/sr.c | 19 +-
drivers/scsi/sun3_NCR5380.c | 195 ++++----
drivers/scsi/sun3_scsi.c | 241 +++++++---
drivers/scsi/sun3_scsi.h | 199 +-------
drivers/scsi/sun3_scsi_vme.c | 588 +-----------------------
drivers/scsi/t128.c | 4 -
drivers/scsi/t128.h | 7 -
drivers/scsi/ufs/ufs.h | 36 +-
drivers/scsi/ufs/ufshcd.c | 722 ++++++++++++++++++++----------
drivers/scsi/ufs/ufshcd.h | 22 +-
drivers/scsi/ufs/ufshci.h | 32 +-
drivers/scsi/virtio_scsi.c | 78 +---
include/scsi/osd_protocol.h | 10 +-
include/scsi/scsi_cmnd.h | 9 +
include/scsi/scsi_driver.h | 9 +-
117 files changed, 4635 insertions(+), 2709 deletions(-)
James
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/