Re: [PATCH v2 06/18] ARM: dts: DRA7: Add divider table to optfclk_pciephy_div clock

[Kishon Vijay Abraham I]

Hi Tero,

On Thursday 19 June 2014 04:40 PM, Tero Kristo wrote:
> On 05/29/2014 09:38 AM, Kishon Vijay Abraham I wrote:
>> From: Keerthy <j-keerthy@xxxxxx>
>>
>> Add divider table to optfclk_pciephy_div clock. The Documentation
>> for divider clock can be found at ../clock/ti/divider.txt
> 
> This patch requires a better changelog. Why is the change done, any TRM refs etc.?

The 8th bit of CM_CLKMODE_APLL_PCIE can be programmed to either 0x0 or 0x1
based on if the divider value is 0x2 or 0x1.

Figure 26-21. PCIe PHY Clock Generator Overview in vE of DRA7xx ES1.0 shows the
block diagram of Clock Generator Subsystem of PCIe PHY module. We have to do a
bypass (divided by 1) in order to get the correct PCIE_PHY_DIV_GCLK
frequency.

Thanks
Kishon
> 
> -Tero
> 
>>
>> Cc: Rajendra Nayak <rnayak@xxxxxx>
>> Cc: Tero Kristo <t-kristo@xxxxxx>
>> Cc: Paul Walmsley <paul@xxxxxxxxx>
>> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>>   arch/arm/boot/dts/dra7xx-clocks.dtsi |    1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> b/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> index c767687..55e95c5 100644
>> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> @@ -1170,6 +1170,7 @@
>>           clocks = <&apll_pcie_ck>;
>>           #clock-cells = <0>;
>>           reg = <0x021c>;
>> +        ti,dividers = <2>, <1>;
>>           ti,bit-shift = <8>;
>>           ti,max-div = <2>;
>>       };
>>
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/