Re: [PATCH 2/2] clocksource: add rockchip-specific armv7-timer setup

[Mark Rutland]

On Fri, Jun 20, 2014 at 11:44:49AM +0100, Heiko StÃbner wrote:
> The armv7-timer on Rockchip RK3288 SoCs needs an underlying timer to run.
> Therefore the special rockchip,rk3288-armv7-timer does this setup and
> then initializes the architected timer using the new locally exposed
> arch_timer_init.
> 
> Suggested-by: Arnd Bergmann <arnd@xxxxxxxx>
> Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
> ---
>  .../bindings/arm/rockchip/armv7-timer.txt          | 22 +++++++++
>  drivers/clocksource/Makefile                       |  1 +
>  drivers/clocksource/rockchip_timer.c               | 57 ++++++++++++++++++++++
>  3 files changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/rockchip/armv7-timer.txt
>  create mode 100644 drivers/clocksource/rockchip_timer.c
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip/armv7-timer.txt b/Documentation/devicetree/bindings/arm/rockchip/armv7-timer.txt
> new file mode 100644
> index 0000000..4c1950a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/rockchip/armv7-timer.txt
> @@ -0,0 +1,22 @@
> +Rockchip armv7-timer:
> +---------------------
> +
> +The architected timer on rk3288 SoCs has special setup requirements, as
> +the cpu-timer block needs to supply the architected timer.
> +
> +Required node properties:
> +- compatible value : = "rockchip,rk3288-armv7-timer";
> +- reg : physical base address and the size of the registers window
> +        of the supplying timer block
> +- CP15 Timer node properties as described in bindings/arm/arch_timer.txt
> +
> +Example:
> +
> +architected-timer {
> +	compatible = "rockchip,rk3288-armv7-timer";
> +	reg = <0xff810020 0x20>;
> +	interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +		     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +		     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +	clock-frequency = <24000000>;
> +};
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 800b130..cbad225 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_ARCH_MARCO)	+= timer-marco.o
>  obj-$(CONFIG_ARCH_MOXART)	+= moxart_timer.o
>  obj-$(CONFIG_ARCH_MXS)		+= mxs_timer.o
>  obj-$(CONFIG_ARCH_PRIMA2)	+= timer-prima2.o
> +obj-$(CONFIG_ARCH_ROCKCHIP)	+= rockchip_timer.o
>  obj-$(CONFIG_ARCH_U300)		+= timer-u300.o
>  obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
>  obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
> diff --git a/drivers/clocksource/rockchip_timer.c b/drivers/clocksource/rockchip_timer.c
> new file mode 100644
> index 0000000..46c2146
> --- /dev/null
> +++ b/drivers/clocksource/rockchip_timer.c
> @@ -0,0 +1,57 @@
> +/*
> + * Copyright (c) 2014 MundoReader S.L.
> + * Author: Heiko Stuebner <heiko@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/clockchips.h>
> +#include "arm_arch_timer.h"
> +
> +#define TIMER_LOAD_COUNT0		0x00
> +#define TIMER_LOAD_COUNT1		0x04
> +#define TIMER_CURRENT_VALUE0		0x08
> +#define TIMER_CURRENT_VALUE1		0x0c
> +#define TIMER_CONTROL_REG		0x10
> +#define TIMER_INT_STATUS		0x18
> +
> +#define TIMER_DISABLE			(0 << 0)
> +#define TIMER_ENABLE			(1 << 0)
> +#define TIMER_MODE_FREE_RUNNING		(0 << 1)
> +#define TIMER_MODE_USER_DEFINED_COUNT	(1 << 1)
> +#define TIMER_INT_MASK			(0 << 2)
> +#define TIMER_INT_UNMASK		(1 << 2)
> +
> +static __init void rk3288_arch_timer_init(struct device_node *np)
> +{
> +	void __iomem *reg_base;
> +
> +	reg_base = of_io_request_and_map(np, 0, "rk3288-armv7-timer");
> +	if (!reg_base) {
> +		pr_warn("%s: Can't get resource\n", __func__);
> +		return;
> +	}
> +
> +	writel(TIMER_DISABLE, reg_base + TIMER_CONTROL_REG);
> +
> +	writel(0xffffffff, reg_base + TIMER_LOAD_COUNT0);
> +	writel(0xffffffff, reg_base + TIMER_LOAD_COUNT1);
> +
> +	writel(TIMER_ENABLE | TIMER_MODE_FREE_RUNNING,
> +	       reg_base + TIMER_CONTROL_REG);

Given that this is unconditionally set up in this way, could this not be
done in the fimrware/bootloader?

That way you could also setup CNTFREQ correctly, and virtualisation can
just work out of the box.

This looks like a clock driver in disguise...

Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/