[PATCH v4 3/3] ARM: DT: qcom: Add Qualcomm crypto driver binding document

From: Stanimir Varbanov
Date: Wed Jun 25 2014 - 12:30:20 EST


Here is Qualcomm crypto driver device tree binding documentation
to used as a reference example.

Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
---
.../devicetree/bindings/crypto/qcom-qce.txt | 25 ++++++++++++++++++++
1 files changed, 25 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt

diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
new file mode 100644
index 0000000..fdd53b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
@@ -0,0 +1,25 @@
+Qualcomm crypto engine driver
+
+Required properties:
+
+- compatible : should be "qcom,crypto-v5.1"
+- reg : specifies base physical address and size of the registers map
+- clocks : phandle to clock-controller plus clock-specifier pair
+- clock-names : "iface" clocks register interface
+ "bus" clocks data transfer interface
+ "core" clocks rest of the crypto block
+- dmas : DMA specifiers for tx and rx dma channels. For more see
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names : DMA request names should be "rx" and "tx"
+
+Example:
+ crypto@fd45a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0xfd45a000 0x6000>;
+ clocks = <&gcc GCC_CE2_AHB_CLK>,
+ <&gcc GCC_CE2_AXI_CLK>,
+ <&gcc GCC_CE2_CLK>;
+ clock-names = "iface", "bus", "core";
+ dmas = <&cryptobam 2>, <&cryptobam 3>;
+ dma-names = "rx", "tx";
+ };
--
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/