[PATCH 3.15 099/139] libiscsi, iser: Adjust data_length to include protection information
From: Greg Kroah-Hartman
Date: Sat Jun 28 2014 - 14:02:38 EST
3.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagi Grimberg <sagig@xxxxxxxxxxxx>
commit d77e65350f2d82dfa0557707d505711f5a43c8fd upstream.
In case protection information exists over the wire
iscsi header data length is required to include it.
Use protection information aware scsi helpers to set
the correct transfer length.
In order to avoid breakage, remove iser transfer length
checks for each task as they are not always true and
somewhat redundant anyway.
Signed-off-by: Sagi Grimberg <sagig@xxxxxxxxxxxx>
Reviewed-by: Mike Christie <michaelc@xxxxxxxxxxx>
Acked-by: Mike Christie <michaelc@xxxxxxxxxxx>
Signed-off-by: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/infiniband/ulp/iser/iser_initiator.c | 34 +++++++--------------------
drivers/scsi/libiscsi.c | 18 +++++++-------
2 files changed, 19 insertions(+), 33 deletions(-)
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -41,11 +41,11 @@
#include "iscsi_iser.h"
/* Register user buffer memory and initialize passive rdma
- * dto descriptor. Total data size is stored in
- * iser_task->data[ISER_DIR_IN].data_len
+ * dto descriptor. Data size is stored in
+ * task->data[ISER_DIR_IN].data_len, Protection size
+ * os stored in task->prot[ISER_DIR_IN].data_len
*/
-static int iser_prepare_read_cmd(struct iscsi_task *task,
- unsigned int edtl)
+static int iser_prepare_read_cmd(struct iscsi_task *task)
{
struct iscsi_iser_task *iser_task = task->dd_data;
@@ -73,14 +73,6 @@ static int iser_prepare_read_cmd(struct
return err;
}
- if (edtl > iser_task->data[ISER_DIR_IN].data_len) {
- iser_err("Total data length: %ld, less than EDTL: "
- "%d, in READ cmd BHS itt: %d, conn: 0x%p\n",
- iser_task->data[ISER_DIR_IN].data_len, edtl,
- task->itt, iser_task->ib_conn);
- return -EINVAL;
- }
-
err = device->iser_reg_rdma_mem(iser_task, ISER_DIR_IN);
if (err) {
iser_err("Failed to set up Data-IN RDMA\n");
@@ -100,8 +92,9 @@ static int iser_prepare_read_cmd(struct
}
/* Register user buffer memory and initialize passive rdma
- * dto descriptor. Total data size is stored in
- * task->data[ISER_DIR_OUT].data_len
+ * dto descriptor. Data size is stored in
+ * task->data[ISER_DIR_OUT].data_len, Protection size
+ * is stored at task->prot[ISER_DIR_OUT].data_len
*/
static int
iser_prepare_write_cmd(struct iscsi_task *task,
@@ -135,14 +128,6 @@ iser_prepare_write_cmd(struct iscsi_task
return err;
}
- if (edtl > iser_task->data[ISER_DIR_OUT].data_len) {
- iser_err("Total data length: %ld, less than EDTL: %d, "
- "in WRITE cmd BHS itt: %d, conn: 0x%p\n",
- iser_task->data[ISER_DIR_OUT].data_len,
- edtl, task->itt, task->conn);
- return -EINVAL;
- }
-
err = device->iser_reg_rdma_mem(iser_task, ISER_DIR_OUT);
if (err != 0) {
iser_err("Failed to register write cmd RDMA mem\n");
@@ -417,11 +402,12 @@ int iser_send_command(struct iscsi_conn
if (scsi_prot_sg_count(sc)) {
prot_buf->buf = scsi_prot_sglist(sc);
prot_buf->size = scsi_prot_sg_count(sc);
- prot_buf->data_len = sc->prot_sdb->length;
+ prot_buf->data_len = data_buf->data_len >>
+ ilog2(sc->device->sector_size) * 8;
}
if (hdr->flags & ISCSI_FLAG_CMD_READ) {
- err = iser_prepare_read_cmd(task, edtl);
+ err = iser_prepare_read_cmd(task);
if (err)
goto send_command_error;
}
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -338,7 +338,7 @@ static int iscsi_prep_scsi_cmd_pdu(struc
struct iscsi_session *session = conn->session;
struct scsi_cmnd *sc = task->sc;
struct iscsi_scsi_req *hdr;
- unsigned hdrlength, cmd_len;
+ unsigned hdrlength, cmd_len, transfer_length;
itt_t itt;
int rc;
@@ -391,11 +391,11 @@ static int iscsi_prep_scsi_cmd_pdu(struc
if (scsi_get_prot_op(sc) != SCSI_PROT_NORMAL)
task->protected = true;
+ transfer_length = scsi_transfer_length(sc);
+ hdr->data_length = cpu_to_be32(transfer_length);
if (sc->sc_data_direction == DMA_TO_DEVICE) {
- unsigned out_len = scsi_out(sc)->length;
struct iscsi_r2t_info *r2t = &task->unsol_r2t;
- hdr->data_length = cpu_to_be32(out_len);
hdr->flags |= ISCSI_FLAG_CMD_WRITE;
/*
* Write counters:
@@ -414,18 +414,19 @@ static int iscsi_prep_scsi_cmd_pdu(struc
memset(r2t, 0, sizeof(*r2t));
if (session->imm_data_en) {
- if (out_len >= session->first_burst)
+ if (transfer_length >= session->first_burst)
task->imm_count = min(session->first_burst,
conn->max_xmit_dlength);
else
- task->imm_count = min(out_len,
- conn->max_xmit_dlength);
+ task->imm_count = min(transfer_length,
+ conn->max_xmit_dlength);
hton24(hdr->dlength, task->imm_count);
} else
zero_data(hdr->dlength);
if (!session->initial_r2t_en) {
- r2t->data_length = min(session->first_burst, out_len) -
+ r2t->data_length = min(session->first_burst,
+ transfer_length) -
task->imm_count;
r2t->data_offset = task->imm_count;
r2t->ttt = cpu_to_be32(ISCSI_RESERVED_TAG);
@@ -438,7 +439,6 @@ static int iscsi_prep_scsi_cmd_pdu(struc
} else {
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
zero_data(hdr->dlength);
- hdr->data_length = cpu_to_be32(scsi_in(sc)->length);
if (sc->sc_data_direction == DMA_FROM_DEVICE)
hdr->flags |= ISCSI_FLAG_CMD_READ;
@@ -466,7 +466,7 @@ static int iscsi_prep_scsi_cmd_pdu(struc
scsi_bidi_cmnd(sc) ? "bidirectional" :
sc->sc_data_direction == DMA_TO_DEVICE ?
"write" : "read", conn->id, sc, sc->cmnd[0],
- task->itt, scsi_bufflen(sc),
+ task->itt, transfer_length,
scsi_bidi_cmnd(sc) ? scsi_in(sc)->length : 0,
session->cmdsn,
session->max_cmdsn - session->exp_cmdsn + 1);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/