Re: [PATCH v3 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY

[Srinivas Kandagatla]

On 14/07/14 11:30, Kishon Vijay Abraham I wrote:
> On Monday 14 July 2014 02:17 PM, Srinivas Kandagatla wrote:
> > Hi Kishon,
> >
> > First patch in this series adds support to the APQ8064 SATA PHY.
> > Second patch updates the existing Kumar gala's device tree PHY bindings
> > with APQ8064 soc specific compatible.
> >
> > Eventhough there are two seperate drivers for both IPQ and APQ SOCs,
> > the bindings are exactly same, so I did not create new bindings document.
>
> Er.. create a separate binding.

Ok, no issues.
> > Could you please pick these patches for v3.17.
>
> Sure. please rebase to linux-phy next and re-send.
I will do it.

thanks,
srini
> Thanks
> Kishon
> > Changes since v2:
> > 	- added usleep_range in poll timeout as discussed
> > 		with Bartlomiej Zolnierkiewicz.
> > 	- Added missing pdev_set_drvdata spotted by
> > 		Bartlomiej Zolnierkiewicz
> >
> > Changes since v1:
> > 	- included DT bindings in the series.
> >
> > Thanks,
> > srini
> >
> > Srinivas Kandagatla (2):
> >    phy: qcom: Add driver for QCOM APQ8064 SATA PHY
> >    phy: qcom: Update APQ8064 PHY device tree bindings
> >
> >   Documentation/devicetree/bindings/phy/qcom-phy.txt |   3 +-
> >   drivers/phy/Kconfig                                |   7 +
> >   drivers/phy/Makefile                               |   1 +
> >   drivers/phy/phy-qcom-apq8064-sata.c                | 288 +++++++++++++++++++++
> >   4 files changed, 298 insertions(+), 1 deletion(-)
> >   create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/