[PATCH v2 2/3] regulator: s2mpa01: Optimize the regulator description macro
From: Amit Daniel Kachhap
Date: Tue Jul 15 2014 - 07:03:16 EST
This patch makes the regulator description macro take minimum and
steps voltage as parameter. In this way many repeated macros can be
removed. Now these macros are repeated only if the the LDO/BUCK ctrl
registers have non-linear positions. The good thing is these ctrl registers
are mostly linear so they are not passed as parameters.
This patch reduces the code size and also allow easy addition of more
s2mpxxx PMIC drivers which differs a lot in minimum/step voltages.
Cc: Sangbeom Kim <sbkim73@xxxxxxxxxxx>
Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
---
Changes since v1:
* Removed min parameter from regulator_desc_ldo1 as pointed by Krzysztof
* Added Cc to maintainers.
* Added Krzysztof reviewed-by.
drivers/regulator/s2mpa01.c | 134 ++++++++++++--------------------------------
1 file changed, 36 insertions(+), 98 deletions(-)
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index 962c5f1..89fe32c 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -235,28 +235,14 @@ static struct regulator_ops s2mpa01_buck_ops = {
.set_ramp_delay = s2mpa01_set_ramp_delay,
};
-#define regulator_desc_ldo1(num) { \
+#define regulator_desc_ldo(num, step) { \
.name = "LDO"#num, \
.id = S2MPA01_LDO##num, \
.ops = &s2mpa01_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MIN_800_MV, \
- .uV_step = STEP_50_MV, \
- .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
- .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
- .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
- .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
- .enable_mask = S2MPA01_ENABLE_MASK \
-}
-#define regulator_desc_ldo2(num) { \
- .name = "LDO"#num, \
- .id = S2MPA01_LDO##num, \
- .ops = &s2mpa01_ldo_ops, \
- .type = REGULATOR_VOLTAGE, \
- .owner = THIS_MODULE, \
- .min_uV = MIN_800_MV, \
- .uV_step = STEP_25_MV, \
+ .uV_step = step, \
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
@@ -296,14 +282,14 @@ static struct regulator_ops s2mpa01_buck_ops = {
.enable_mask = S2MPA01_ENABLE_MASK \
}
-#define regulator_desc_buck6_7(num) { \
+#define regulator_desc_buck6_10(num, min, step) { \
.name = "BUCK"#num, \
.id = S2MPA01_BUCK##num, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = MIN_600_MV, \
- .uV_step = STEP_6_25_MV, \
+ .min_uV = min, \
+ .uV_step = step, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
@@ -312,91 +298,43 @@ static struct regulator_ops s2mpa01_buck_ops = {
.enable_mask = S2MPA01_ENABLE_MASK \
}
-#define regulator_desc_buck8 { \
- .name = "BUCK8", \
- .id = S2MPA01_BUCK8, \
- .ops = &s2mpa01_buck_ops, \
- .type = REGULATOR_VOLTAGE, \
- .owner = THIS_MODULE, \
- .min_uV = MIN_800_MV, \
- .uV_step = STEP_12_5_MV, \
- .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
- .ramp_delay = S2MPA01_RAMP_DELAY, \
- .vsel_reg = S2MPA01_REG_B8CTRL2, \
- .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
- .enable_reg = S2MPA01_REG_B8CTRL1, \
- .enable_mask = S2MPA01_ENABLE_MASK \
-}
-
-#define regulator_desc_buck9 { \
- .name = "BUCK9", \
- .id = S2MPA01_BUCK9, \
- .ops = &s2mpa01_buck_ops, \
- .type = REGULATOR_VOLTAGE, \
- .owner = THIS_MODULE, \
- .min_uV = MIN_1500_MV, \
- .uV_step = STEP_12_5_MV, \
- .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
- .ramp_delay = S2MPA01_RAMP_DELAY, \
- .vsel_reg = S2MPA01_REG_B9CTRL2, \
- .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
- .enable_reg = S2MPA01_REG_B9CTRL1, \
- .enable_mask = S2MPA01_ENABLE_MASK \
-}
-
-#define regulator_desc_buck10 { \
- .name = "BUCK10", \
- .id = S2MPA01_BUCK10, \
- .ops = &s2mpa01_buck_ops, \
- .type = REGULATOR_VOLTAGE, \
- .owner = THIS_MODULE, \
- .min_uV = MIN_1000_MV, \
- .uV_step = STEP_12_5_MV, \
- .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
- .ramp_delay = S2MPA01_RAMP_DELAY, \
- .vsel_reg = S2MPA01_REG_B10CTRL2, \
- .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
- .enable_reg = S2MPA01_REG_B10CTRL1, \
- .enable_mask = S2MPA01_ENABLE_MASK \
-}
-
static struct regulator_desc regulators[] = {
- regulator_desc_ldo2(1),
- regulator_desc_ldo1(2),
- regulator_desc_ldo1(3),
- regulator_desc_ldo1(4),
- regulator_desc_ldo1(5),
- regulator_desc_ldo2(6),
- regulator_desc_ldo1(7),
- regulator_desc_ldo1(8),
- regulator_desc_ldo1(9),
- regulator_desc_ldo1(10),
- regulator_desc_ldo2(11),
- regulator_desc_ldo1(12),
- regulator_desc_ldo1(13),
- regulator_desc_ldo1(14),
- regulator_desc_ldo1(15),
- regulator_desc_ldo1(16),
- regulator_desc_ldo1(17),
- regulator_desc_ldo1(18),
- regulator_desc_ldo1(19),
- regulator_desc_ldo1(20),
- regulator_desc_ldo1(21),
- regulator_desc_ldo2(22),
- regulator_desc_ldo2(23),
- regulator_desc_ldo1(24),
- regulator_desc_ldo1(25),
- regulator_desc_ldo1(26),
+ regulator_desc_ldo(1, STEP_25_MV),
+ regulator_desc_ldo(2, STEP_50_MV),
+ regulator_desc_ldo(3, STEP_50_MV),
+ regulator_desc_ldo(4, STEP_50_MV),
+ regulator_desc_ldo(5, STEP_50_MV),
+ regulator_desc_ldo(6, STEP_25_MV),
+ regulator_desc_ldo(7, STEP_50_MV),
+ regulator_desc_ldo(8, STEP_50_MV),
+ regulator_desc_ldo(9, STEP_50_MV),
+ regulator_desc_ldo(10, STEP_50_MV),
+ regulator_desc_ldo(11, STEP_25_MV),
+ regulator_desc_ldo(12, STEP_50_MV),
+ regulator_desc_ldo(13, STEP_50_MV),
+ regulator_desc_ldo(14, STEP_50_MV),
+ regulator_desc_ldo(15, STEP_50_MV),
+ regulator_desc_ldo(16, STEP_50_MV),
+ regulator_desc_ldo(17, STEP_50_MV),
+ regulator_desc_ldo(18, STEP_50_MV),
+ regulator_desc_ldo(19, STEP_50_MV),
+ regulator_desc_ldo(20, STEP_50_MV),
+ regulator_desc_ldo(21, STEP_50_MV),
+ regulator_desc_ldo(22, STEP_25_MV),
+ regulator_desc_ldo(23, STEP_25_MV),
+ regulator_desc_ldo(24, STEP_50_MV),
+ regulator_desc_ldo(25, STEP_50_MV),
+ regulator_desc_ldo(26, STEP_50_MV),
regulator_desc_buck1_4(1),
regulator_desc_buck1_4(2),
regulator_desc_buck1_4(3),
regulator_desc_buck1_4(4),
regulator_desc_buck5,
- regulator_desc_buck6_7(6),
- regulator_desc_buck6_7(7),
- regulator_desc_buck8,
- regulator_desc_buck9,
- regulator_desc_buck10,
+ regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
+ regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
+ regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
+ regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
+ regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
};
static int s2mpa01_pmic_probe(struct platform_device *pdev)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/