Re: [PATCH v3] hwmon: pwm-fan: Add pwm-fan driver

[Varka Bhadram]

On 07/15/2014 05:21 PM, Kamil Debski wrote:
> The pwm-fan driver enables control of fans connected to PWM lines.
> This driver uses the PWM framework, so it is compatible with all
> PWM devices that provide drivers through the PWM framework.
>
> Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
> ---
> Changes since v2:
> - add CONFIG_PM_SLEEP around pwm_fan_suspend and pwm_fan_resume
> Changes since v1:
> - added documentation to Documentation/hwmon
> - fix checkpatch errors
> 	- added extra description to Kconfig
> 	- removed whitespace errors
> - include files rearranged to be in alphabetical order
> - remove unused sysfs entry pwm1_enable
> - changed the behavior of the set_pwm function
> 	- when 0 PWM value is set pwm_disable is run
> 	- pwm_config return value is checked for errors
> - use of ATTRIBUTE_GROUPS was added
> - removed "Not enouch memory" error message
> - fixed probe return value in case of devm_of_pwm_get error
> - changed hwmon_device_register_with_groups to
>    devm_hwmon_device_register_with_groups
> - changes suspend/resume to use pwm_disable/enable
> - removed unnecessary CONFIG_PM_SLEEP ifdefs
> ---
>   .../devicetree/bindings/hwmon/pwm-fan.txt          |   12 ++
>   Documentation/hwmon/pwm-fan                        |   17 ++
>   drivers/hwmon/Kconfig                              |   11 ++
>   drivers/hwmon/Makefile                             |    1 +
>   drivers/hwmon/pwm-fan.c                            |  201 ++++++++++++++++++++
>   5 files changed, 242 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/hwmon/pwm-fan.txt
>   create mode 100644 Documentation/hwmon/pwm-fan
>   create mode 100644 drivers/hwmon/pwm-fan.c
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> new file mode 100644
> index 0000000..f534607
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> @@ -0,0 +1,12 @@
> +Bindings for a fan connected to the PWM lines
> +
> +Required properties:
> +- compatible: "pwm-fan"
> +- pwms: the PWM that is used to control the PWM fan
It would be more readable if it like this...
Required properties:
- compatible		: should be "pwm-fan"
- pwms			: The PWM that is used to control the PWM fan




--
Regards,
Varka Bhadram.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/