Re: [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding

[pramod gurav]

On Thu, Jul 17, 2014 at 3:50 AM, Bjorn Andersson <bjorn@xxxxxxx> wrote:
>> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
>> <bjorn.andersson@xxxxxxxxxxxxxx> wrote:
> [...]
>>> +       rpm@108000 {
>>> +               compatible = "qcom,rpm-msm8960";
>>> +               reg = <0x108000 0x1000>;
>>> +               qcom,ipc = <&apcs 0x8 2>;
>>
>> Tried adding this but there is no reference to 'apcs' registers itself
>> in any dts.
>>
>> Without these changes rpm breaks hence not able to test SATA which needs rpm.
>>
>
> Hi Pramod,
>
> Unfortunately the ipc bits resides in a block that needs to be
> accesses by various device drivers so I had to extract the access; so
> you now need to reference it via a syscon handle and offset instead -
> as described above.
>
> The apcs node I used for testing this with looks like this:
>
> apcs: syscon@2011000 {
>     compatible = "syscon";
>     reg = <0x2011000 0x1000>;
> };
>
> Enable CONFIG_MFD_SYSCON and put the dt snippet somewhere under soc
> and you should be good.
>

Thanks Bjorn. Did this and seen things working (sata atleast).

> Regards,
> Bjorn



-- 
Thanks and Regards
Pramod
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/