RE: [PATCH v7 3/4] ARM: EXYNOS: Add platform driver support for Exynos PMU

From: Pankaj Dubey
Date: Fri Jul 25 2014 - 01:31:29 EST


Hi Kukjin,

On Friday, July 25, 2014 Kukjin Kim wrote:
> Subject: RE: [PATCH v7 3/4] ARM: EXYNOS: Add platform driver support for
> Exynos PMU
>
> Pankaj Dubey wrote:
> >
> > This patch modifies Exynos Power Management Unit (PMU) initialization
> > implementation in following way:
> >
> > - Added platform driver support and probe function where Exynos PMU
> > driver will register itself as syscon provider with syscon framework.
> > - Added platform struct exynos_pmu_data to hold platform specific data.
> > - For each SoC's PMU support now we can add platform data and statically
> > bind PMU configuration and SoC specific initialization function.
> > - Separate each SoC's PMU initialization function and make it as part of
> > platform data.
> > - It also removes uses of soc_is_exynosXYZ().
> >
> > Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> > Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
> > ---
> > arch/arm/mach-exynos/Kconfig | 1 +
> > arch/arm/mach-exynos/pmu.c | 185
> +++++++++++++++++++++++++++++++++---------
> > 2 files changed, 146 insertions(+), 40 deletions(-)
> >
> Looks good to me, will apply this and 4/4.
>

We need to hold these two patches until dependent patch [1] from Tomasz Figa
gets merged.

[1]: mfd: syscon: Decouple syscon interface from syscon devices
https://lkml.org/lkml/2014/6/24/188


Thanks,
Pankaj Dubey

> Thanks,
> Kukjin
>
> > diff --git a/arch/arm/mach-exynos/Kconfig
> > b/arch/arm/mach-exynos/Kconfig index 8f9b66c..a2944ac 100644
> > --- a/arch/arm/mach-exynos/Kconfig
> > +++ b/arch/arm/mach-exynos/Kconfig
> > @@ -24,6 +24,7 @@ menuconfig ARCH_EXYNOS
> > select PM_GENERIC_DOMAINS if PM_RUNTIME
> > select S5P_DEV_MFC
> > select SRAM
> > + select MFD_SYSCON
> > help
> > Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
> >
> > diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
> > index ff9d23f..5b76728 100644
> > --- a/arch/arm/mach-exynos/pmu.c
> > +++ b/arch/arm/mach-exynos/pmu.c
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
> > + * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
> > * http://www.samsung.com/
> > *
> > * EXYNOS - CPU PMU(Power Management Unit) support @@ -10,12 +10,28
> > @@
> > */
> >
> > #include <linux/io.h>
> > -#include <linux/kernel.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/mfd/syscon.h>
> >
> > #include "common.h"
> > #include "regs-pmu.h"
> >
> > -static const struct exynos_pmu_conf *exynos_pmu_config;
> > +struct exynos_pmu_data {
> > + const struct exynos_pmu_conf *pmu_config;
> > + const struct exynos_pmu_conf *pmu_config_extra;
> > +
> > + void (*pmu_init)(void);
> > + void (*powerdown_conf)(enum sys_powerdown); };
> > +
> > +struct exynos_pmu_context {
> > + struct device *dev;
> > + const struct exynos_pmu_data *pmu_data; };
> > +
> > +static struct exynos_pmu_context *pmu_context;
> >
> > static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
> > /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ @@ -335,7
> > +351,7 @@ static unsigned int const exynos5_list_diable_wfi_wfe[] = {
> > EXYNOS5_ISP_ARM_OPTION,
> > };
> >
> > -static void exynos5_init_pmu(void)
> > +static void exynos5_powerdown_conf(enum sys_powerdown mode)
> > {
> > unsigned int i;
> > unsigned int tmp;
> > @@ -372,51 +388,140 @@ void exynos_sys_powerdown_conf(enum
> > sys_powerdown mode) {
> > unsigned int i;
> >
> > - if (soc_is_exynos5250())
> > - exynos5_init_pmu();
> > + const struct exynos_pmu_data *pmu_data = pmu_context->pmu_data;
> >
> > - for (i = 0; (exynos_pmu_config[i].offset != PMU_TABLE_END) ; i++)
> > - pmu_raw_writel(exynos_pmu_config[i].val[mode],
> > - exynos_pmu_config[i].offset);
> > + if (pmu_data->powerdown_conf)
> > + pmu_data->powerdown_conf(mode);
> >
> > - if (soc_is_exynos4412()) {
> > - for (i = 0; exynos4412_pmu_config[i].offset != PMU_TABLE_END
;
> i++)
> > - pmu_raw_writel(exynos4412_pmu_config[i].val[mode],
> > - exynos4412_pmu_config[i].offset);
> > + if (pmu_data->pmu_config) {
> > + for (i = 0; (pmu_data->pmu_config[i].offset !=
PMU_TABLE_END)
> ; i++)
> > + pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
> > + pmu_data->pmu_config[i].offset);
> > + }
> > +
> > + if (pmu_data->pmu_config_extra) {
> > + for (i = 0; pmu_data->pmu_config_extra[i].offset !=
> PMU_TABLE_END; i++)
> > +
pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
> > +
pmu_data->pmu_config_extra[i].offset);
> > }
> > }
> >
> > -static int __init exynos_pmu_init(void)
> > +static void exynos5250_pmu_init(void)
> > {
> > unsigned int value;
> > + /*
> > + * When SYS_WDTRESET is set, watchdog timer reset request
> > + * is ignored by power management unit.
> > + */
> > + value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
> > + value &= ~EXYNOS5_SYS_WDTRESET;
> > + pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
> > +
> > + value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
> > + value &= ~EXYNOS5_SYS_WDTRESET;
> > + pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST); }
> > +
> > +static const struct exynos_pmu_data exynos4210_pmu_data = {
> > + .pmu_config = exynos4210_pmu_config,
> > +};
> > +
> > +static const struct exynos_pmu_data exynos4212_pmu_data = {
> > + .pmu_config = exynos4x12_pmu_config,
> > +};
> > +
> > +static const struct exynos_pmu_data exynos4412_pmu_data = {
> > + .pmu_config = exynos4x12_pmu_config,
> > + .pmu_config_extra = exynos4412_pmu_config,
> > +};
> > +
> > +static const struct exynos_pmu_data exynos5250_pmu_data = {
> > + .pmu_config = exynos5250_pmu_config,
> > + .pmu_init = exynos5250_pmu_init,
> > + .powerdown_conf = exynos5_powerdown_conf,
> > +};
> > +
> > +static const struct regmap_config pmu_regmap_config = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = 4,
> > +};
> >
> > - exynos_pmu_config = exynos4210_pmu_config;
> > -
> > - if (soc_is_exynos4210()) {
> > - exynos_pmu_config = exynos4210_pmu_config;
> > - pr_info("EXYNOS4210 PMU Initialize\n");
> > - } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
> > - exynos_pmu_config = exynos4x12_pmu_config;
> > - pr_info("EXYNOS4x12 PMU Initialize\n");
> > - } else if (soc_is_exynos5250()) {
> > - /*
> > - * When SYS_WDTRESET is set, watchdog timer reset request
> > - * is ignored by power management unit.
> > - */
> > - value =
> pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
> > - value &= ~EXYNOS5_SYS_WDTRESET;
> > - pmu_raw_writel(value,
> EXYNOS5_AUTO_WDTRESET_DISABLE);
> > -
> > - value =
> pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
> > - value &= ~EXYNOS5_SYS_WDTRESET;
> > - pmu_raw_writel(value,
> EXYNOS5_MASK_WDTRESET_REQUEST);
> > -
> > - exynos_pmu_config = exynos5250_pmu_config;
> > - pr_info("EXYNOS5250 PMU Initialize\n");
> > - } else {
> > - pr_info("EXYNOS: PMU not supported\n");
> > +/*
> > + * PMU platform driver and devicetree bindings.
> > + */
> > +static const struct of_device_id exynos_pmu_of_device_ids[] = {
> > + {
> > + .compatible = "samsung,exynos4210-pmu",
> > + .data = &exynos4210_pmu_data,
> > + }, {
> > + .compatible = "samsung,exynos4212-pmu",
> > + .data = &exynos4212_pmu_data,
> > + }, {
> > + .compatible = "samsung,exynos4412-pmu",
> > + .data = &exynos4412_pmu_data,
> > + }, {
> > + .compatible = "samsung,exynos5250-pmu",
> > + .data = &exynos5250_pmu_data,
> > + },
> > + { /*sentinel*/ },
> > +};
> > +
> > +static int exynos_pmu_probe(struct platform_device *pdev) {
> > + const struct of_device_id *match;
> > + struct device *dev = &pdev->dev;
> > + struct regmap *regmap;
> > + struct resource *res;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + pmu_base_addr = devm_ioremap_resource(dev, res);
> > + if (IS_ERR(pmu_base_addr))
> > + return PTR_ERR(pmu_base_addr);
> > +
> > + pmu_context = devm_kzalloc(&pdev->dev,
> > + sizeof(struct exynos_pmu_context),
> > + GFP_KERNEL);
> > + if (!pmu_context) {
> > + dev_err(dev, "Cannot allocate memory.\n");
> > + return -ENOMEM;
> > + }
> > + pmu_context->dev = dev;
> > +
> > + regmap = devm_regmap_init_mmio(dev, pmu_base_addr,
> > + &pmu_regmap_config);
> > + if (IS_ERR(regmap)) {
> > + dev_err(dev, "regmap init failed\n");
> > + return PTR_ERR(regmap);
> > }
> >
> > + devm_syscon_register(dev, regmap);
> > +
> > + match = of_match_node(exynos_pmu_of_device_ids, pdev->dev.of_node);
> > +
> > + pmu_context->pmu_data = match->data;
> > +
> > + if (pmu_context->pmu_data->pmu_init)
> > + pmu_context->pmu_data->pmu_init();
> > +
> > + platform_set_drvdata(pdev, pmu_context);
> > +
> > + dev_dbg(dev, "Exynos PMU Driver probe done\n");
> > return 0;
> > }
> > -arch_initcall(exynos_pmu_init);
> > +
> > +static struct platform_driver exynos_pmu_driver = {
> > + .driver = {
> > + .name = "exynos-pmu",
> > + .owner = THIS_MODULE,
> > + .of_match_table = exynos_pmu_of_device_ids,
> > + },
> > + .probe = exynos_pmu_probe,
> > +};
> > +
> > +static int __init exynos_pmu_init(void) {
> > + return platform_driver_register(&exynos_pmu_driver);
> > +
> > +}
> > +postcore_initcall(exynos_pmu_init);
> > --
> > 1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/