Re: [PATCH v2 2/4] driver core: enable drivers to use deferred probe from init

[Greg KH]

On Sat, Aug 09, 2014 at 06:41:19PM +0200, Luis R. Rodriguez wrote:
> On Wed, Jul 30, 2014 at 03:11:07PM -0700, David Miller wrote:
> > From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxxxxxxxxx>
> > Date: Mon, 28 Jul 2014 11:28:28 -0700
> > 
> > > Tetsuo bisected and found that commit 786235ee "kthread: make
> > > kthread_create() killable" modified kthread_create() to bail as
> > > soon as SIGKILL is received. This is causing some issues with
> > > some drivers and at times boot. Joseph then found that failures
> > > occur as the systemd-udevd process sends SIGKILL to modprobe if
> > > probe on a driver takes over 30 seconds. When this happens probe
> > > will fail on any driver, its why booting on some system will fail
> > > if the driver happens to be a storage related driver. Some folks
> > > have suggested fixing this by modifying kthread_create() to not
> > > leave upon SIGKILL [3], upon review Oleg rejected this change and
> > > the discussion was punted out to systemd to see if the default
> > > timeout could be increased from 30 seconds to 120. The opinion of
> > > the systemd maintainers is that the driver's behavior should
> > > be fixed [4]. Linus seems to agree [5], however more recently even
> > > networking drivers have been reported to fail on probe since just
> > > writing the firmware to a device and kicking it can take easy over
> > > 60 seconds [6]. Benjamim was able to trace the issues recently
> > > reported on cxgb4 down to the same systemd-udevd 30 second timeout [6].
> > > 
> > > This is an alternative solution which enables drivers that are
> > > known to take long to use deferred probe workqueue. This avoids
> > > the 30 second timeout and lets us annotate drivers with long
> > > init sequences.
> > > 
> > > As drivers determine a component is not yet available and needs
> > > to defer probe you'll be notified this happen upon init for each
> > > device but now with a message such as:
> > > 
> > > pci 0000:03:00.0: Driver cxgb4 requests probe deferral on init
> > > 
> > > You should see one of these per struct device probed.
> > 
> > It seems we're still discussing this.
> > 
> > I think I understand all of the underlying issues, and what I'll say
> > is that perhaps we should use what Greg KH requested but via a helper
> > that is easy to grep for.
> > 
> > I don't care if it's something like "module_long_probe_init()" and
> > "module_long_probe_exit()", but it just needs to be some properly
> > named interface which does the whole kthread or whatever bit.
> 
> I've tested the alternative kthread_run() proposal but unfortunately it
> does not help resolve the issue, the timeout is still hit and a SIGKILL
> still kills the driver probe. Please let me know how you'd all like us
> to proceed, these defer probe patches do help cure the issue though.

Why doesn't it work?  Doesn't modprobe come right back and the init
sequence still takes a while to run?  What exactly fails?

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/