Re: [PATCH v4 1/4] drivers/mfd/menf21bmc: introduce MEN 14F021P00 BMC MFD Core driver

[Lee Jones]

On Thu, 21 Aug 2014, Andreas Werner wrote:
> On Thu, Aug 21, 2014 at 12:30:46PM +0100, Lee Jones wrote:
> > On Wed, 13 Aug 2014, Andreas Werner wrote:
> > > The MEN 14F021P00 Board Management Controller provides an
> > > I2C interface to the host to access the feature implemented in the BMC.
> > > The BMC is a PIC Microntroller assembled on CPCI Card from MEN Mikroelektronik
> > > and on a few Box/Display Computer.
> > > 
> > > Added MFD Core driver, supporting the I2C communication to the device.
> > > 
> > > The MFD driver currently supports the following features:
> > >  	- Watchdog
> > >  	- LEDs
> > > 	- Hwmon (voltage monitoring)
> > > 
> > > Signed-off-by: Andreas Werner <andreas.werner@xxxxxx>
> > > ---
> > >  drivers/mfd/Kconfig     |  12 +++++
> > >  drivers/mfd/Makefile    |   1 +
> > >  drivers/mfd/menf21bmc.c | 132 ++++++++++++++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 145 insertions(+)
> > >  create mode 100644 drivers/mfd/menf21bmc.c
> > > 
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index b8d9ca0..bf155b9 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -453,6 +453,18 @@ config MFD_MAX8998
> > >  	  additional drivers must be enabled in order to use the functionality
> > >  	  of the device.
> > >  
> > > +config MFD_MENF21BMC
> > > +	tristate "MEN 14F021P00 Board Management Controller Support"
> > > +	depends on I2C=y
> > 
> > Why must I2C be built-in?
> 
> Sorry my mistake, I2C must not be built in.
> 
> > 
> > > +	select MFD_CORE
> > > +	help
> > > +	  Say yes here to add support for the MEN 14F021P00 BMC
> > > +	  which is a Board Management Controller connected to the I2C bus.
> > > +	  The device supports multiple sub-devices like LED, HWMON  and WDT.
> > > +	  This driver provides common support for accessing the devices;
> > > +	  additional drivers must be enabled in order to use the
> > > +	  functionality of the BMC device.
> > > +
> > 
> > Apart from that the patch looks good to me.
> > 
> > I'm assuming this can go in via the MFD tree by itself?
> 
> Yes why not.
> Do you want to have a single patch for the MFD or
> is it better to wait for the other Subsystem maintainer that I 
> can resend a patch v5?

When you resent, apply my Ack and I'll pick it up when the other
Maintainers are happy.

> > 
> > Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> > 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/