[PATCH for -next] stmmac: simple cleanups

From: Pavel Machek
Date: Mon Aug 25 2014 - 07:31:25 EST


This adds simple cleanups for stmmac, removing test we know is always
true, fixing whitespace, and moving code out of if().

Signed-off-by: Pavel Machek <pavel@xxxxxxx>

---

Now against -net-next.

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 9af50ba..493fe69 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -261,11 +261,11 @@ static int stmmac_ethtool_getsettings(struct net_device *dev,
ethtool_cmd_speed_set(cmd, priv->xstats.pcs_speed);

/* Get and convert ADV/LP_ADV from the HW AN registers */
- if (priv->hw->mac->get_adv)
- priv->hw->mac->get_adv(priv->hw, &adv);
- else
+ if (!priv->hw->mac->get_adv)
return -EOPNOTSUPP; /* should never happen indeed */

+ priv->hw->mac->get_adv(priv->hw, &adv);
+
/* Encoding of PSE bits is defined in 802.3z, 37.2.1.4 */

if (adv.pause & STMMAC_PCS_PAUSE)
@@ -340,19 +340,17 @@ static int stmmac_ethtool_setsettings(struct net_device *dev,
if (cmd->autoneg != AUTONEG_ENABLE)
return -EINVAL;

- if (cmd->autoneg == AUTONEG_ENABLE) {
- mask &= (ADVERTISED_1000baseT_Half |
+ mask &= (ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full);

- spin_lock(&priv->lock);
- if (priv->hw->mac->ctrl_ane)
- priv->hw->mac->ctrl_ane(priv->hw, 1);
- spin_unlock(&priv->lock);
- }
+ spin_lock(&priv->lock);
+ if (priv->hw->mac->ctrl_ane)
+ priv->hw->mac->ctrl_ane(priv->hw, 1);
+ spin_unlock(&priv->lock);

return 0;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 08addd6..8fcc64c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -818,7 +818,7 @@ static int stmmac_init_phy(struct net_device *dev)
/* Stop Advertising 1000BASE Capability if interface is not GMII */
if ((interface == PHY_INTERFACE_MODE_MII) ||
(interface == PHY_INTERFACE_MODE_RMII) ||
- (max_speed < 1000 && max_speed > 0))
+ (max_speed < 1000 && max_speed > 0))
phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index a5b1e1b..8dd0408 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -253,7 +253,7 @@ int stmmac_mdio_register(struct net_device *ndev)
}

/*
- * If we're going to bind the MAC to this PHY bus,
+ * If we're going to bind the MAC to this PHY bus,
* and no PHY number was provided to the MAC,
* use the one probed here.
*/

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/