Re: [PATCH v3] apf27dev: add max1027 in the dts

From: Shawn Guo
Date: Mon Sep 01 2014 - 04:24:34 EST


On Sun, Aug 31, 2014 at 10:40:29PM +0200, Philippe Reynes wrote:
>
> Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
> ---
> arch/arm/boot/dts/imx27-apf27dev.dts | 17 +++++++++++++++++
> 1 files changed, 17 insertions(+), 0 deletions(-)
>
> Changelog:
> v3: (thanks Alexander Shiyan for the feedback)
> - add datasheet pin name as comment
>
> v2: (thanks Alexander Shiyan for the feedback)
> - spi mode 0 is the default so no need to explicitly define it
>
> diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
> index b982309..0c08fbb 100644
> --- a/arch/arm/boot/dts/imx27-apf27dev.dts
> +++ b/arch/arm/boot/dts/imx27-apf27dev.dts
> @@ -82,6 +82,16 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
> status = "okay";
> +
> + adc@0 {
> + compatible = "maxim,max1027";
> + reg = <0>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_max1027>;
> + spi-max-frequency = <10000000>;
> + };
> };
>
> &cspi2 {
> @@ -230,6 +240,13 @@
> pinctrl_sdhc2_cd: sdhc2cdgrp {
> fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
> };
> +
> + pinctrl_max1027: max1027 {

The pinctrl entries are alphabetically sorted in there. Can you also do
that for your addition?

> + fsl,pins = <
> + MX27_PAD_UART1_CTS__GPIO5_14 0 /* CNVST */
> + MX27_PAD_UART1_RTS__GPIO5_15 0 /* EOC */

Can you follow the convention to use hex value for the config cell,
i.e. s/0/0x0?

Shawn

> + >;
> + };
> };
> };
>
> --
> 1.7.4.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/