Re: [PATCH v1 4/5] mfd: lpc_sch: Add support for Intel Quark X1000

[Lee Jones]

On Fri, 22 Aug 2014, Andy Shevchenko wrote:

> Intel Quark X1000 SoC supports IRQ based GPIO. This patch will
> enable MFD support for Quark X1000 and provide IRQ resources
> to Quark X1000 GPIO device driver.
> 
> Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@xxxxxxxxx>
> Tested-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@xxxxxxxxx>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
>  drivers/mfd/lpc_sch.c | 41 +++++++++++++++++++++++++++++++++++------
>  1 file changed, 35 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
> index c4eb359..6145a4c 100644
> --- a/drivers/mfd/lpc_sch.c
> +++ b/drivers/mfd/lpc_sch.c
> @@ -37,6 +37,9 @@
>  #define GPIO_IO_SIZE	64
>  #define GPIO_IO_SIZE_CENTERTON	128
>  
> +/* Intel Quark X1000 GPIO IRQ Number */
> +#define GPIO_IRQ_QUARK_X1000	9
> +
>  #define WDTBASE		0x84
>  #define WDT_IO_SIZE	64
>  
> @@ -44,28 +47,37 @@ enum sch_chipsets {
>  	LPC_SCH = 0,		/* Intel Poulsbo SCH */
>  	LPC_ITC,		/* Intel Tunnel Creek */
>  	LPC_CENTERTON,		/* Intel Centerton */
> +	LPC_QUARK_X1000,	/* Intel Quark X1000 */
>  };
>  
>  struct lpc_sch_info {
>  	unsigned int io_size_smbus;
>  	unsigned int io_size_gpio;
>  	unsigned int io_size_wdt;
> +	int irq_gpio;
>  };
>  
>  static struct lpc_sch_info sch_chipset_info[] = {
>  	[LPC_SCH] = {
>  		.io_size_smbus = SMBUS_IO_SIZE,
>  		.io_size_gpio = GPIO_IO_SIZE,
> +		.irq_gpio = -1,
>  	},
>  	[LPC_ITC] = {
>  		.io_size_smbus = SMBUS_IO_SIZE,
>  		.io_size_gpio = GPIO_IO_SIZE,
>  		.io_size_wdt = WDT_IO_SIZE,
> +		.irq_gpio = -1,
>  	},
>  	[LPC_CENTERTON] = {
>  		.io_size_smbus = SMBUS_IO_SIZE,
>  		.io_size_gpio = GPIO_IO_SIZE_CENTERTON,
>  		.io_size_wdt = WDT_IO_SIZE,
> +		.irq_gpio = -1,
> +	},
> +	[LPC_QUARK_X1000] = {
> +		.io_size_gpio = GPIO_IO_SIZE,
> +		.irq_gpio = GPIO_IRQ_QUARK_X1000,
>  	},
>  };
>  
> @@ -73,6 +85,7 @@ static const struct pci_device_id lpc_sch_ids[] = {
>  	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC), LPC_SCH },
>  	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC), LPC_ITC },
>  	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB), LPC_CENTERTON },
> +	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB), LPC_QUARK_X1000 },
>  	{ 0, }
>  };
>  MODULE_DEVICE_TABLE(pci, lpc_sch_ids);
> @@ -106,14 +119,26 @@ static int lpc_sch_get_io(struct pci_dev *pdev, int where, const char *name,
>  	return 0;
>  }
>  
> +static int lpc_sch_get_irq(struct resource *res, int irq)
> +{
> +	if (irq < 0)
> +		return -EINVAL;
> +
> +	res->start = irq;
> +	res->end = irq;
> +	res->flags = IORESOURCE_IRQ;
> +
> +	return 0;
> +}

Why does this need to be a separate function?

I fear that the code will become unnecessarily fragmented, just for the
sake of it.

>  static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
> -				 const char *name, int size, int id,
> -				 struct mfd_cell *cell)
> +				 const char *name, int size, int irq,
> +				 int id, struct mfd_cell *cell)
>  {
>  	struct resource *res;
>  	int ret;
>  
> -	res = devm_kzalloc(&pdev->dev, sizeof(*res), GFP_KERNEL);
> +	res = devm_kcalloc(&pdev->dev, 2, sizeof(*res), GFP_KERNEL);
>  	if (!res)
>  		return -ENOMEM;
>  
> @@ -129,6 +154,10 @@ static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
>  	cell->ignore_resource_conflicts = true;
>  	cell->id = id;
>  
> +	ret = lpc_sch_get_irq(++res, irq);
> +	if (!ret)
> +		cell->num_resources++;

Once again, you're masking errors.  If it's not an error, don't return
one.  If it is, filter it back and fail the bind.

>  	return 0;
>  }
>  
> @@ -141,19 +170,19 @@ static int lpc_sch_probe(struct pci_dev *dev,
>  	int ret;
>  
>  	ret = lpc_sch_populate_cell(dev, SMBASE, "isch_smbus",
> -				    info->io_size_smbus,
> +				    info->io_size_smbus, -1,
>  				    id->device, &lpc_sch_cells[cells]);
>  	if (!ret)
>  		cells++;
>  
>  	ret = lpc_sch_populate_cell(dev, GPIOBASE, "sch_gpio",
> -				    info->io_size_gpio,
> +				    info->io_size_gpio, info->irq_gpio,
>  				    id->device, &lpc_sch_cells[cells]);
>  	if (!ret)
>  		cells++;
>  
>  	ret = lpc_sch_populate_cell(dev, WDTBASE, "ie6xx_wdt",
> -				    info->io_size_wdt,
> +				    info->io_size_wdt, -1,
>  				    id->device, &lpc_sch_cells[cells]);
>  	if (!ret)
>  		cells++;
-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/