Re: [PATCH 4/4] x86, fpu: irq_fpu_usable: kill all checks except !in_kernel_fpu

From: Suresh Siddha
Date: Tue Sep 02 2014 - 03:04:27 EST


On Fri, Aug 29, 2014 at 11:17 AM, Oleg Nesterov <oleg@xxxxxxxxxx> wrote:
> ONCE AGAIN, THIS IS MORE THE QUESTION THAN THE PATCH.

this patch I think needs more thought for sure. please see below.

>
> interrupted_kernel_fpu_idle() does:
>
> if (use_eager_fpu())
> return true;
>
> return !__thread_has_fpu(current) &&
> (read_cr0() & X86_CR0_TS);
>
> and it is absolutely not clear why these 2 cases differ so much.
>
> To remind, the use_eager_fpu() case is buggy; __save_init_fpu() in
> __kernel_fpu_begin() can race with math_state_restore() which does
> __thread_fpu_begin() + restore_fpu_checking(). So we should fix this
> race anyway and we can't require __thread_has_fpu() == F likes the
> !use_eager_fpu() case does, in this case kernel_fpu_begin() will not
> work if it interrupts the idle thread (this will reintroduce the
> performance regression fixed by 5187b28f).
>
> Probably math_state_restore() can use kernel_fpu_disable/end() which
> sets/clears in_kernel_fpu, or it can disable irqs. Doesn't matter, we
> should fix this bug anyway.
>
> And if we fix this bug, why else !use_eager_fpu() case needs the much
> more strict check? Why we can't handle the __thread_has_fpu(current)
> case the same way?
>
> The comment deleted by this change says:
>
> and TS must be set so that the clts/stts pair does nothing
>
> and can explain the difference, but I can not understand this (again,
> assuming that we fix the race(s) mentoined above).
>
> Say, user_fpu_begin(). Yes, kernel_fpu_begin/end() can restore X86_CR0_TS.
> But this should be fine?

No. The reason is that has_fpu state and cr0.TS can get out of sync.

Let's say you get an interrupt after clts() in __thread_fpu_begin()
called as part of user_fpu_begin().

And because of this proposed change, irq_fpu_usable() returns true and
an interrupt can end-up using fpu and after the return from interrupt
we can have a state where cr0.TS is set but we end up resuming the
execution from __thread_set_has_fpu(). Now after this point has_fpu is
set but cr0.TS is set. And now any schedule() with this state (let's
say immd after preemption_enable() at the end of user_fpu_begin()) is
dangerous. We can get a dna fault in the middle of __switch_to() which
can lead to subtle bugs.


> A context switch before restore_user_xstate()
> can equally set it back?
> And device_not_available() should be fine even
> in kernel context?

not in some critical places like switch_to().

other than this patch, rest of the changes look ok to me. Can you
please resend this patchset with the math_state_restore() race
addressed aswell?

thanks,
suresh

>
> I'll appreciate any comment.
> ---
> arch/x86/kernel/i387.c | 44 +-------------------------------------------
> 1 files changed, 1 insertions(+), 43 deletions(-)
>
> diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
> index 9fb2899..ef60f33 100644
> --- a/arch/x86/kernel/i387.c
> +++ b/arch/x86/kernel/i387.c
> @@ -22,54 +22,12 @@
> static DEFINE_PER_CPU(bool, in_kernel_fpu);
>
> /*
> - * Were we in an interrupt that interrupted kernel mode?
> - *
> - * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that
> - * pair does nothing at all: the thread must not have fpu (so
> - * that we don't try to save the FPU state), and TS must
> - * be set (so that the clts/stts pair does nothing that is
> - * visible in the interrupted kernel thread).
> - *
> - * Except for the eagerfpu case when we return 1.
> - */
> -static inline bool interrupted_kernel_fpu_idle(void)
> -{
> - if (this_cpu_read(in_kernel_fpu))
> - return false;
> -
> - if (use_eager_fpu())
> - return true;
> -
> - return !__thread_has_fpu(current) &&
> - (read_cr0() & X86_CR0_TS);
> -}
> -
> -/*
> - * Were we in user mode (or vm86 mode) when we were
> - * interrupted?
> - *
> - * Doing kernel_fpu_begin/end() is ok if we are running
> - * in an interrupt context from user mode - we'll just
> - * save the FPU state as required.
> - */
> -static inline bool interrupted_user_mode(void)
> -{
> - struct pt_regs *regs = get_irq_regs();
> - return regs && user_mode_vm(regs);
> -}
> -
> -/*
> * Can we use the FPU in kernel mode with the
> * whole "kernel_fpu_begin/end()" sequence?
> - *
> - * It's always ok in process context (ie "not interrupt")
> - * but it is sometimes ok even from an irq.
> */
> bool irq_fpu_usable(void)
> {
> - return !in_interrupt() ||
> - interrupted_user_mode() ||
> - interrupted_kernel_fpu_idle();
> + return !this_cpu_read(in_kernel_fpu);
> }
> EXPORT_SYMBOL(irq_fpu_usable);
>
> --
> 1.5.5.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/