[PATCH 4/5] clk: at91: rework rm9200 USB clock to propagate set_rate to the parent clk

From: Boris BREZILLON
Date: Tue Sep 02 2014 - 03:50:46 EST


The RM9200 USB clock is actually connected to a single parent (the PLLB)
on which we can apply a specific divider.
The USB clock divider does not allow for fine grained control on the USB
clock frequency, hence propagating the set_rate request to the parent is
the only choice we have to properly configure the USB clock rate.

Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Reported-by: GaÃl PORTAY <gael.portay@xxxxxxxxx>
---
drivers/clk/at91/clk-usb.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 7d1d26a..1838777 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -238,16 +238,22 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw);
+ struct clk *parent = __clk_get_parent(hw->clk);
unsigned long bestrate = 0;
int bestdiff = -1;
unsigned long tmprate;
int tmpdiff;
int i = 0;

- for (i = 0; i < 4; i++) {
+ for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) {
+ unsigned long tmp_parent_rate;
+
if (!usb->divisors[i])
continue;
- tmprate = *parent_rate / usb->divisors[i];
+
+ tmp_parent_rate = rate * usb->divisors[i];
+ tmp_parent_rate = __clk_round_rate(parent, tmp_parent_rate);
+ tmprate = tmp_parent_rate / usb->divisors[i];
if (tmprate < rate)
tmpdiff = rate - tmprate;
else
@@ -256,6 +262,7 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
if (bestdiff < 0 || bestdiff > tmpdiff) {
bestrate = tmprate;
bestdiff = tmpdiff;
+ *parent_rate = tmp_parent_rate;
}

if (!bestdiff)
@@ -311,7 +318,7 @@ at91rm9200_clk_register_usb(struct at91_pmc *pmc, const char *name,
init.ops = &at91rm9200_usb_ops;
init.parent_names = &parent_name;
init.num_parents = 1;
- init.flags = 0;
+ init.flags = CLK_SET_RATE_PARENT;

usb->hw.init = &init;
usb->pmc = pmc;
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/