Re: [PATCH] extcon: max77693: Fix a bug occured at changing ADC debounce time.

[Chanwoo Choi]

On 09/03/2014 03:39 PM, jonghwa3.lee@xxxxxxxxxxx wrote:
> On 2014ë 09ì 03ì 14:55, Chanwoo Choi wrote:
> 
>> On 09/03/2014 02:50 PM, Jonghwa Lee wrote:
>>> When it writes some value other than 0 to BTLDset and JIGset, muic device
>>> will be reset automatically. And it happens during updating ADC debounce time,
>>> because it shares same register. To update ADC debounce time without reset,
>>> set value only to ADCDbset and 0 to BTLDset and JIGset.
>>>
>>> Signed-off-by: Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx>
>>> ---
>>>  drivers/extcon/extcon-max77693.c |   11 ++++++++---
>>>  1 file changed, 8 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
>>> index 77460f2..661a3bb 100644
>>> --- a/drivers/extcon/extcon-max77693.c
>>> +++ b/drivers/extcon/extcon-max77693.c
>>> @@ -255,10 +255,15 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
>>>  	case ADC_DEBOUNCE_TIME_10MS:
>>>  	case ADC_DEBOUNCE_TIME_25MS:
>>>  	case ADC_DEBOUNCE_TIME_38_62MS:
>>> -		ret = regmap_update_bits(info->max77693->regmap_muic,
>>> +		/*
>>> +		 * Don't touch BTLDset, JIGset when you want to change adc
>>> +		 * debounce time. BTLDset, JIGset reflects actual pin status
>>> +		 * and are not configurable.
>>> +		 */
>>> +		ret = regmap_write_bits(info->max77693->regmap_muic,
>>>  					  MAX77693_MUIC_REG_CTRL3,
>>> -					  CONTROL3_ADCDBSET_MASK,
>>> -					  time << CONTROL3_ADCDBSET_SHIFT);
>>> +					  (CONTROL3_ADCDBSET_MASK &
>>> +					  time << CONTROL3_ADCDBSET_SHIFT));
>>
>> Do you make this patch on extcon-next branch?
>>
>> The max77693_muic_set_debounce_time() of extcon-max77693.c
>> use regmap_update_bits instead of regmap_write_bits as following:
> 
> 
> This patch intends to use 'regmap_write_bits()' not 'regmap_update_bits()'.

You're right. It is my mistake to review this patch.

> With using regmap_update_bits(), it would writes some value to BTLDset and
> JIGset then muic device will loose current state.

OK, I'll apply yout next patch(v2).

Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/