RE: [PATCH] mfd: da9052: Avoid setting read_flag_mask for da9052-i2c driver
From: Opensource [Adam Thomson]
Date: Wed Sep 03 2014 - 06:50:27 EST
On August 28, 2014 14:38, Adam Thomson wrote:
> On August 28, 2014 12:21, Lee Jones wrote:
>
> > Steve, Adam,
> >
> > > Current code init regmap with &da9052_regmap_config for both da9052-spi and
> > > da9052-i2c drivers. da9052-spi sets the read_flag_mask.
> > > The same setting may be applied for da9052-i2c if da9052-spi driver is loaded
> > > first because they actually use the same regmap_config setting.
> > > Fix this issue by using a local variable for regmap_config in da9052-spi driver,
> > > so the settings in spi driver won't impact the settings in i2c driver.
> > > Also makes da9052_regmap_config const to avoid similar issue.
> > >
> > > Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
> > > ---
> > > Hi Adam and Steve,
> > > Any chance to test this patch?
> >
> > ** Look here **
>
> Lee, Axel,
>
> This was on my to-do list but hadn't yet responded. Will try and find some time
> in the next week to see if we can verify this.
Hi Axel, Lee,
I don't think I'm going to have time to test this soon. In terms of the change it looks fine to me, although I don't think you can run both SPI and I2C at the same time for this driver (I tried a quick test to instantiate both and saw issues with regulator initialisation for the second instance). Anyway, here's my ack for the change.
Acked-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
N§²æ¸yú²X¬¶ÇvØ)Þ{.nÇ·¥{±êX§¶¡Ü}©²ÆzÚj:+v¨¾«êZ+Êzf£¢·h§~Ûÿû®w¥¢¸?¨è&¢)ßfùy§m
á«a¶Úÿ0¶ìå