Re: [PATCH v2 2/2] PCI: keystone: update to support multiple pci ports

[Arnd Bergmann]

On Tuesday 09 September 2014 16:17:15 Murali Karicheri wrote:
> K2E SoC has two PCI ports. The SATA controller is connected to second
> PCI port (port 1). This patch enhances the driver to support multiple
> ports.
> 
> Update the DT Documentation for the new attribute, ti,pcie-port and
> remove the note for bootargs as this is no longer needed.
> 
> Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
> ---
>  - updated based on comment against v1
>  .../devicetree/bindings/pci/pci-keystone.txt       |    8 +++++---
>  drivers/pci/host/pci-keystone.c                    |   15 ++++++++++-----
>  drivers/pci/host/pci-keystone.h                    |    4 ++--
>  3 files changed, 17 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
> index bedacf0..c8f5773 100644
> --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
> +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
> @@ -56,11 +56,13 @@ Optional properties:-
>  	phy-names: name of the Generic Keystine SerDes phy for PCI
>  	  - If boot loader already does PCI link establishment, then phys and
>  	    phy-names shouldn't be present.
> +	ti,pcie-port: PCI port number. This is used to configure the PCI port
> +	    number. For example K2E SoC supports 2 PCI ports and PCI bindings
> +	    for the second port adds ti,pcie-port = <1> to identify second port
> +	    and driver uses this to configure the PCI mode register for second
> +	    port. If not present, port number 0 is assumed.

Is this still needed? I thought with patch 1 removed, we no longer had
a reason to know the port number.

> -=========================
> -Driver requires pci=pcie_bus_perf in the bootargs for proper functioning.
> diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c
> index f1119eb..893820d 100644
> --- a/drivers/pci/host/pci-keystone.c
> +++ b/drivers/pci/host/pci-keystone.c
> @@ -253,8 +253,8 @@ static int keystone_pcie_fault(unsigned long addr, unsigned int fsr,
>  
>  static void __init ks_pcie_host_init(struct pcie_port *pp)
>  {
> -	u32 vendor_device_id, val;
>  	struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
> +	u32 val;
>  
>  	ks_pcie_establish_link(ks_pcie);
>  	ks_dw_pcie_setup_rc_app_regs(ks_pcie);
> @@ -263,8 +263,7 @@ static void __init ks_pcie_host_init(struct pcie_port *pp)
>  			pp->dbi_base + PCI_IO_BASE);
>  
>  	/* update the Vendor ID */
> -	vendor_device_id = readl(ks_pcie->va_reg_pciid);
> -	writew((vendor_device_id >> 16), pp->dbi_base + PCI_DEVICE_ID);
> +	writew(ks_pcie->device_id, pp->dbi_base + PCI_DEVICE_ID);
>  
>  	/* update the DEV_STAT_CTRL to publish right mrrs */
>  	val = readl(pp->dbi_base + PCIE_CAP_BASE + PCI_EXP_DEVCTL);

This change must have slipped in accidentally, at least it's not
described in the changelog. Should this be another patch?
The change seems useful.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/