Re: [PATCH v3] cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec

[Viresh Kumar]

On 11 September 2014 15:43, Shilpasri G Bhat
<shilpa.bhat@xxxxxxxxxxxxxxxxxx> wrote:
> This patch ensures the cpus to kexec/reboot at nominal frequency.
> Nominal frequency is the highest cpu frequency on PowerPC at
> which the cores can run without getting throttled.
>
> If the host kernel had set the cpus to a low pstate and then it
> kexecs/reboots to a cpufreq disabled kernel it would cause the target
> kernel to perform poorly. It will also increase the boot up time of
> the target kernel. So set the cpus to high pstate, in this case to
> nominal frequency before rebooting to avoid such scenarios.
>
> The reboot notifier will set the cpus to nominal frequncy.
>
> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@xxxxxxxxxxxxxxxxxx>
> Suggested-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> Reviewed-by: Preeti U Murthy <preeti@xxxxxxxxxxxxxxxxxx>
> ---
> Changes v2->v3:
> We return EBUSY when cpufreq governor tries to change the frequency
> after rebooting is set to true. This results in console being flushed
> with error messages indicating failed attempts to change the
> frequency. So instead of returning EBUSY we return 0 to stop the
> governor from changing the frequency without alerting a failure to
> do the same on reboot, as this  is not an errorneaos condition.

Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/