Re: [PATCH v2 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards

[Alexander Shiyan]

Fri, 12 Sep 2014 19:04:30 +0300 ÐÑ Dmitry Lavnikevich <d.lavnikevich@xxxxxxxxxxxxxxxxx>:
> Audio on phyFLEX boards is presented by tlv320aic3007 codec connected
> over SSI interface.
> 
> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@xxxxxxxxxxxxxxxxx>
> ---
...
> +&audmux {
> +	status = "okay";
> +
> +	ssi2 {
> +		fsl,audmux-port = <1>;
> +		fsl,port-config = <0xa5000000 0x00008000>;
> +	};
> +	pins5 {
> +		fsl,audmux-port = <4>;
> +		fsl,port-config = <0x00000000 0x00002000>;
> +	};
> +};

You should use defines from sound/fsl-imx-audmux.h for audmux.

---