Re: [BUG] Bisected Problem with LSI PCI FC Adapter

From: Dirk Gouders
Date: Fri Sep 19 2014 - 11:04:42 EST


Yinghai Lu <yinghai@xxxxxxxxxx> writes:

> On Fri, Sep 12, 2014 at 5:11 PM, Dirk Gouders <dirk@xxxxxxxxxxx> wrote:
>> Yinghai Lu <yinghai@xxxxxxxxxx> writes:
>>
>> Yes, I skip them in pci_scan_device() to get the unused bus number space
>> that 0a.0 and 0b.0 then can use when reconfiguration is triggered.
>
> That is not right. Can not let two bridges use same bus num.
>
>>
>>> Proper simulation could be:
>>> 1. remove 07:00.0
>>> echo 1 > /sys/bus/pci/devices/0000:07:00.0/remove
>>> 2. change bus range in 00:0a.0 bus
>>> setpci -s 00:0a.0 0x1c.l=0x00101000
>>> 3. remove 00:0a.0
>>> echo 1 > /sys/bus/pci/devices/0000:00:0a.0/remove
>>> 4. rescan pci
>>> echo 1 > /sys/bus/pci/rescan
>>> 5. reset pcie link from 00:0a.0
>>> setpci -s 00:0a.0 0xc0.b=0x18
>>> sleep 1s
>>> setpci -s 00:0a.0 0xc0.b=0x08
>>> 6. rescan pci bus
>>> echo 1 > /sys/bus/pci/rescan
>>
>> OK, I did that (with 3.16) but the reconfiguration code doesn't
>> get triggered. Here is what dmesg and lspci -tv say:
>
> 2 should be
> setpci -s 00:0a.0 0x18.l=0x00101000

I'm very sorry for the late test result, Yinghai, I totally overlooked
this correction.

I'm not sure if it is still of interest but
I now tried these corrected commands on the test machine with a vanilla
3.16 kernel. The FC adapter disappears but I cannot see the

"bridge configuration invalid ..., reconfiguring" message,

so I assume that the test situation is still not exactly matching that
on the vx50 or am I missing something?

lspci before and lspci + dmesg after above commands attached.

Dirk

- lspci before ---------------------------------------------------------
-[0000:00]-+-01.0-[01-02]--+-0d.0-[02]--
| +-0e.0 Broadcom BCM5785 [HT1000] SATA (PATA/IDE Mode)
| \-0e.1 Broadcom BCM5785 [HT1000] SATA (PATA/IDE Mode)
+-02.0 Broadcom BCM5785 [HT1000] Legacy South Bridge
+-02.1 Broadcom BCM5785 [HT1000] IDE
+-02.2 Broadcom BCM5785 [HT1000] LPC
+-03.0 Broadcom BCM5785 [HT1000] USB
+-03.1 Broadcom BCM5785 [HT1000] USB
+-03.2 Broadcom BCM5785 [HT1000] USB
+-06.0-[03]--
+-07.0-[04]--+-04.0 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
| \-04.1 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
+-08.0-[05]--
+-09.0-[06]--
+-0a.0-[07]----00.0 LSI Logic / Symbios Logic FC949ES Fibre Channel Adapter
+-0b.0-[08]--
+-0c.0 Advanced Micro Devices, Inc. [AMD/ATI] ES1000
+-18.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
+-18.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
+-18.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
+-18.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
+-19.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
+-19.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
+-19.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
\-19.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

- lspci after ----------------------------------------------------------
-[0000:00]-+-01.0-[01-02]--+-0d.0-[02]--
| +-0e.0 Broadcom BCM5785 [HT1000] SATA (PATA/IDE Mode)
| \-0e.1 Broadcom BCM5785 [HT1000] SATA (PATA/IDE Mode)
+-02.0 Broadcom BCM5785 [HT1000] Legacy South Bridge
+-02.1 Broadcom BCM5785 [HT1000] IDE
+-02.2 Broadcom BCM5785 [HT1000] LPC
+-03.0 Broadcom BCM5785 [HT1000] USB
+-03.1 Broadcom BCM5785 [HT1000] USB
+-03.2 Broadcom BCM5785 [HT1000] USB
+-06.0-[03]--
+-07.0-[04]--+-04.0 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
| \-04.1 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
+-08.0-[05]--
+-09.0-[06]--
+-0a.0-[10]--
+-0b.0-[08]--
+-0c.0 Advanced Micro Devices, Inc. [AMD/ATI] ES1000
+-18.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
+-18.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
+-18.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
+-18.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
+-19.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
+-19.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
+-19.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
\-19.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

- dmesg after ----------------------------------------------------------
[ 214.234819] pci_bus 0000:07: busn_res: [bus 07] is released
[ 214.234981] pci_scan_child_bus: pci_bus 0000:00: scanning bus
[ 214.235037] pci 0000:00:0a.0: [1166:0132] type 01 class 0x060400
[ 214.235128] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 214.235221] pci_scan_bridge: pci 0000:00:01.0: scanning [bus 01-02] behind bridge, pass 0
[ 214.235227] pci_scan_child_bus: pci_bus 0000:01: scanning bus
[ 214.235258] pci_scan_bridge: pci 0000:01:0d.0: scanning [bus 02-02] behind bridge, pass 0
[ 214.235262] pci_scan_child_bus: pci_bus 0000:02: scanning bus
[ 214.235295] pci_scan_child_bus: pci_bus 0000:02: bus scan returning with max=02
[ 214.235301] pci_scan_bridge: pci 0000:01:0d.0: scanning [bus 02-02] behind bridge, pass 1
[ 214.235306] pci_scan_child_bus: pci_bus 0000:01: bus scan returning with max=02
[ 214.235312] pci_scan_bridge: pci 0000:00:06.0: scanning [bus 03-03] behind bridge, pass 0
[ 214.235316] pci_scan_child_bus: pci_bus 0000:03: scanning bus
[ 214.235343] pci_scan_child_bus: pci_bus 0000:03: bus scan returning with max=03
[ 214.235348] pci_scan_bridge: pci 0000:00:07.0: scanning [bus 04-04] behind bridge, pass 0
[ 214.235352] pci_scan_child_bus: pci_bus 0000:04: scanning bus
[ 214.235376] pci_scan_child_bus: pci_bus 0000:04: bus scan returning with max=04
[ 214.235381] pci_scan_bridge: pcieport 0000:00:08.0: scanning [bus 05-05] behind bridge, pass 0
[ 214.235386] pci_scan_child_bus: pci_bus 0000:05: scanning bus
[ 214.235390] pci_scan_child_bus: pci_bus 0000:05: bus scan returning with max=05
[ 214.235394] pci_scan_bridge: pcieport 0000:00:09.0: scanning [bus 06-06] behind bridge, pass 0
[ 214.235398] pci_scan_child_bus: pci_bus 0000:06: scanning bus
[ 214.235402] pci_scan_child_bus: pci_bus 0000:06: bus scan returning with max=06
[ 214.235407] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 08-08] behind bridge, pass 0
[ 214.235411] pci_scan_child_bus: pci_bus 0000:08: scanning bus
[ 214.235415] pci_scan_child_bus: pci_bus 0000:08: bus scan returning with max=08
[ 214.235420] pci_scan_bridge: pci 0000:00:0a.0: scanning [bus 10-10] behind bridge, pass 0
[ 214.235457] pci_scan_child_bus: pci_bus 0000:10: scanning bus
[ 214.235461] pci_scan_child_bus: pci_bus 0000:10: fixups for bus
[ 214.235464] pci 0000:00:0a.0: PCI bridge to [bus 10]
[ 214.235470] pci 0000:00:0a.0: bridge window [io 0x9000-0xbfff]
[ 214.235475] pci 0000:00:0a.0: bridge window [mem 0xff300000-0xff5fffff]
[ 214.235480] pci 0000:00:0a.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
[ 214.235483] pci_scan_child_bus: pci_bus 0000:10: bus scan returning with max=10
[ 214.235487] pci_scan_bridge: pci 0000:00:01.0: scanning [bus 01-02] behind bridge, pass 1
[ 214.235493] pci_scan_bridge: pci 0000:00:06.0: scanning [bus 03-03] behind bridge, pass 1
[ 214.235498] pci_scan_bridge: pci 0000:00:07.0: scanning [bus 04-04] behind bridge, pass 1
[ 214.235503] pci_scan_bridge: pcieport 0000:00:08.0: scanning [bus 05-05] behind bridge, pass 1
[ 214.235508] pci_scan_bridge: pcieport 0000:00:09.0: scanning [bus 06-06] behind bridge, pass 1
[ 214.235513] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 08-08] behind bridge, pass 1
[ 214.235518] pci_scan_bridge: pci 0000:00:0a.0: scanning [bus 10-10] behind bridge, pass 1
[ 214.235522] pci_scan_child_bus: pci_bus 0000:00: bus scan returning with max=10
[ 214.235567] pci 0000:00:0a.0: BAR 8: assigned [mem 0x80000000-0x802fffff]
[ 214.235574] pci 0000:00:0a.0: BAR 9: assigned [mem 0x280000000-0x2800fffff 64bit pref]
[ 214.235579] pci 0000:00:0a.0: BAR 7: assigned [io 0x1000-0x3fff]
[ 214.235583] pci 0000:01:0d.0: PCI bridge to [bus 02]
[ 214.235592] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 214.235599] pci 0000:00:0a.0: PCI bridge to [bus 10]
[ 214.235603] pci 0000:00:0a.0: bridge window [io 0x1000-0x3fff]
[ 214.235607] pci 0000:00:0a.0: bridge window [mem 0x80000000-0x802fffff]
[ 214.235610] pci 0000:00:0a.0: bridge window [mem 0x280000000-0x2800fffff 64bit pref]
[ 214.235622] fixup_debug_start: pci 0000:00:0a.0: calling quirk_msi_ht_cap+0x0/0x50
[ 214.235627] pci 0000:00:0a.0: Found enabled HT MSI Mapping
[ 215.257656] pci_scan_child_bus: pci_bus 0000:00: scanning bus
[ 215.257713] pci_scan_bridge: pci 0000:00:01.0: scanning [bus 01-02] behind bridge, pass 0
[ 215.257720] pci_scan_child_bus: pci_bus 0000:01: scanning bus
[ 215.257750] pci_scan_bridge: pci 0000:01:0d.0: scanning [bus 02-02] behind bridge, pass 0
[ 215.257755] pci_scan_child_bus: pci_bus 0000:02: scanning bus
[ 215.257788] pci_scan_child_bus: pci_bus 0000:02: bus scan returning with max=02
[ 215.257793] pci_scan_bridge: pci 0000:01:0d.0: scanning [bus 02-02] behind bridge, pass 1
[ 215.257798] pci_scan_child_bus: pci_bus 0000:01: bus scan returning with max=02
[ 215.257803] pci_scan_bridge: pci 0000:00:06.0: scanning [bus 03-03] behind bridge, pass 0
[ 215.257807] pci_scan_child_bus: pci_bus 0000:03: scanning bus
[ 215.257834] pci_scan_child_bus: pci_bus 0000:03: bus scan returning with max=03
[ 215.257839] pci_scan_bridge: pci 0000:00:07.0: scanning [bus 04-04] behind bridge, pass 0
[ 215.257843] pci_scan_child_bus: pci_bus 0000:04: scanning bus
[ 215.257867] pci_scan_child_bus: pci_bus 0000:04: bus scan returning with max=04
[ 215.257872] pci_scan_bridge: pcieport 0000:00:08.0: scanning [bus 05-05] behind bridge, pass 0
[ 215.257876] pci_scan_child_bus: pci_bus 0000:05: scanning bus
[ 215.257880] pci_scan_child_bus: pci_bus 0000:05: bus scan returning with max=05
[ 215.257884] pci_scan_bridge: pcieport 0000:00:09.0: scanning [bus 06-06] behind bridge, pass 0
[ 215.257889] pci_scan_child_bus: pci_bus 0000:06: scanning bus
[ 215.257893] pci_scan_child_bus: pci_bus 0000:06: bus scan returning with max=06
[ 215.257897] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 08-08] behind bridge, pass 0
[ 215.257901] pci_scan_child_bus: pci_bus 0000:08: scanning bus
[ 215.257905] pci_scan_child_bus: pci_bus 0000:08: bus scan returning with max=08
[ 215.257910] pci_scan_bridge: pcieport 0000:00:0a.0: scanning [bus 10-10] behind bridge, pass 0
[ 215.257914] pci_scan_child_bus: pci_bus 0000:10: scanning bus
[ 215.257918] pci_scan_child_bus: pci_bus 0000:10: bus scan returning with max=10
[ 215.257922] pci_scan_bridge: pci 0000:00:01.0: scanning [bus 01-02] behind bridge, pass 1
[ 215.257928] pci_scan_bridge: pci 0000:00:06.0: scanning [bus 03-03] behind bridge, pass 1
[ 215.257933] pci_scan_bridge: pci 0000:00:07.0: scanning [bus 04-04] behind bridge, pass 1
[ 215.257938] pci_scan_bridge: pcieport 0000:00:08.0: scanning [bus 05-05] behind bridge, pass 1
[ 215.257942] pci_scan_bridge: pcieport 0000:00:09.0: scanning [bus 06-06] behind bridge, pass 1
[ 215.257947] pci_scan_bridge: pcieport 0000:00:0b.0: scanning [bus 08-08] behind bridge, pass 1
[ 215.257952] pci_scan_bridge: pcieport 0000:00:0a.0: scanning [bus 10-10] behind bridge, pass 1
[ 215.257956] pci_scan_child_bus: pci_bus 0000:00: bus scan returning with max=10
[ 215.257994] pci 0000:01:0d.0: PCI bridge to [bus 02]
[ 215.258033] pci 0000:00:06.0: PCI bridge to [bus 03]
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/