Re: [PATCH v2 0/6] Add initial support for Broadcom Cygnus SoC

From: Florian Fainelli
Date: Thu Sep 25 2014 - 17:22:52 EST


Hi Scott,

On 09/25/2014 02:04 PM, Scott Branden wrote:
> Hi Matt/Christian (and others),
>
> We would like to move forward in getting our base Cygnus support into
> the mainline kernel. From there we will be able to contribute
> additional drivers.
>
> Is somebody willing to accept this pull request to get this patchset
> accepted by the open source community?

I am fine with taking the ARM patches and putting them at
http://github/brcm/linux.git, with C code in cygnus/board and the Device
Tree files in cygnus/dt for instance?

The clock driver patch will have to go through Mike Turquette's tree
unless he wants to delegate that one.

>
> Regards,
> Scott
>
>
> On 14-09-23 02:17 PM, Jonathan Richardson wrote:
>> Hi,
>>
>> This patchset contains initial support for Broadcom's Cygnus SoC based
>> on our
>> iProc architecture. Initial support is minimal and includes just the mach
>> platform code, clock driver, and a basic device tree configuration.
>> Peripheral
>> drivers will be submitted soon, as will device tree configurations for
>> other
>> Cygnus board variants.
>>
>> Changes from v1:
>> - Address code review comments as per previous responses.
>> - Copyright headers updated to remove Broadcom URL.
>> - mach platform code still contains hard coded adresses. These
>> address are
>> the same for all Cygnus variants. Could you please provide
>> guidance on where
>> they should go if you would still like them changed.
>>
>> Thanks,
>> Jon
>>
>> Jonathan Richardson (6):
>> ARM: cygnus: Initial support for Broadcom Cygnus SoC
>> clk: Clock driver support for Broadcom Cygnus SoC
>> dt-bindings: Document Broadcom Cygnus SoC and clock driver
>> ARM: dts: Enable Broadcom Cygnus SoC
>> ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC
>> MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock
>> drivers
>>
>> Documentation/devicetree/bindings/arm/cygnus.txt | 12 +
>> .../devicetree/bindings/clock/clk-cygnus.txt | 121 ++
>> .../devicetree/bindings/clock/clk-iproc.txt | 48 +
>> MAINTAINERS | 21 +
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/bcm-cygnus.dtsi | 349 ++++++
>> arch/arm/boot/dts/bcm911360_entphn.dts | 22 +
>> arch/arm/configs/bcm_cygnus_defconfig | 223 ++++
>> arch/arm/mach-bcm/Kconfig | 31 +
>> arch/arm/mach-bcm/Makefile | 3 +
>> arch/arm/mach-bcm/bcm_cygnus.c | 166 +++
>> drivers/clk/Makefile | 1 +
>> drivers/clk/bcm/Makefile | 2 +
>> drivers/clk/bcm/clk-cygnus.c | 1186
>> ++++++++++++++++++++
>> drivers/clk/bcm/clk-iproc.c | 451 ++++++++
>> 15 files changed, 2637 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/cygnus.txt
>> create mode 100644
>> Documentation/devicetree/bindings/clock/clk-cygnus.txt
>> create mode 100644
>> Documentation/devicetree/bindings/clock/clk-iproc.txt
>> create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi
>> create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts
>> create mode 100644 arch/arm/configs/bcm_cygnus_defconfig
>> create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c
>> create mode 100644 drivers/clk/bcm/clk-cygnus.c
>> create mode 100644 drivers/clk/bcm/clk-iproc.c
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/