Re: CRASH during boot 3.16.3+

From: Udo van den Heuvel
Date: Mon Oct 13 2014 - 09:47:10 EST


On 2014-10-13 14:14, Peter Hurley wrote:
> Why incomplete? No kernel command line, no version stamp, no CPU info,
> no memory map, no IRQ routing info, etc.
>


# cat /proc/cmdline
ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01
SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1
cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0
mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1


# uname -a
Linux surfplank2.hierzo 3.16.2 #1 SMP PREEMPT Sun Sep 7 10:18:26 CEST
2014 x86_64 x86_64 x86_64 GNU/Linux

# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5800K APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1900.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 16
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid
aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes
xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce
nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt
lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists
pausefilter pfthreshold bmi1
bogomips : 7745.44
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro

processor : 1
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5800K APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 17
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid
aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes
xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce
nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt
lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists
pausefilter pfthreshold bmi1
bogomips : 7745.44
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro

processor : 2
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5800K APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 2
apicid : 18
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid
aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes
xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce
nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt
lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists
pausefilter pfthreshold bmi1
bogomips : 7745.44
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro

processor : 3
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5800K APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 2
apicid : 19
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid
aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes
xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce
nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt
lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists
pausefilter pfthreshold bmi1
bogomips : 7745.44
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro

Different dmesg attached with slightly more logging.
Rest of the system Is fedora 20 and mostly current with updates.


Udo




[ 0.761002] NET: Registered protocol family 1
[ 0.761078] pci 0000:00:01.0: Boot video device
[ 1.005658] PCI: CLS 64 bytes, default 64
[ 1.005702] Trying to unpack rootfs image as initramfs...
[ 1.159413] Freeing initrd memory: 13688K (ffff880037292000 - ffff880037ff0000)
[ 1.159736] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.159797] AMD-Vi: Extended features: PreF PPR GT IA
[ 1.160005] AMD-Vi: Interrupt remapping enabled
[ 1.160075] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 1.166091] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.166548] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.166611] software IO TLB [mem 0x8941d000-0x8d41d000] (64MB) mapped at [ffff88008941d000-ffff88008d41cfff]
[ 1.166942] perf: AMD NB counters detected
[ 1.167021] LVT offset 0 assigned for vector 0x400
[ 1.167093] perf: AMD IBS detected (0x000000ff)
[ 1.167174] Scanning for low memory corruption every 60 seconds
[ 1.169905] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 1.170053] alg: No test for crc32 (crc32-pclmul)
[ 1.170120] sha256_ssse3: Using AVX optimized SHA-256 implementation
[ 1.170345] sha512_ssse3: Using AVX optimized SHA-512 implementation
[ 1.172381] AVX2 instructions are not detected.
[ 1.172569] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.172647] audit: initializing netlink subsys (disabled)
[ 1.172722] audit: type=2000 audit(1411477263.972:1): initialized
[ 1.172960] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.173185] VFS: Disk quotas dquot_6.5.2
[ 1.173257] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.173503] msgmni has been set to 30368
[ 1.174185] alg: No test for stdrng (krng)
[ 1.174254] NET: Registered protocol family 38
[ 1.174333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.174424] io scheduler noop registered (default)
[ 1.174643] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 1.174684] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 1.174750] ACPI: acpi_idle registered with cpuidle
[ 1.175106] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.195450] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.216125] 0000:03:06.0: ttyS1 at I/O 0xd050 (irq = 20, base_baud = 115200) is a 16550A
[ 1.236560] 0000:03:06.0: ttyS2 at I/O 0xd040 (irq = 20, base_baud = 115200) is a 16550A
[ 1.237691] brd: module loaded
[ 1.238174] loop: module loaded
[ 1.238270] ahci 0000:00:11.0: version 3.0
[ 1.238369] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 1.238373] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[ 1.238377] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
[ 1.238380] ahci 0000:00:11.0: irq 46 for MSI/MSI-X
[ 1.238384] ahci 0000:00:11.0: irq 47 for MSI/MSI-X
[ 1.238387] ahci 0000:00:11.0: irq 48 for MSI/MSI-X
[ 1.238390] ahci 0000:00:11.0: irq 49 for MSI/MSI-X
[ 1.238394] ahci 0000:00:11.0: irq 50 for MSI/MSI-X
[ 1.238479] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.238575] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.239683] scsi0 : ahci
[ 1.239867] scsi1 : ahci
[ 1.240014] scsi2 : ahci
[ 1.240154] scsi3 : ahci
[ 1.242681] scsi4 : ahci
[ 1.242824] scsi5 : ahci
[ 1.242966] scsi6 : ahci
[ 1.243110] scsi7 : ahci
[ 1.243198] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 43
[ 1.243291] ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 44
[ 1.243384] ata3: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 45
[ 1.243476] ata4: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 46
[ 1.243574] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 47
[ 1.243666] ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 48
[ 1.243758] ata7: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51400 irq 49
[ 1.243850] ata8: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51480 irq 50
[ 1.244012] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.244332] r8169 0000:01:00.0: irq 51 for MSI/MSI-X
[ 1.244447] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000001c000, 90:2b:34:a1:03:8b, XID 0c900800 IRQ 51
[ 1.244540] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.244651] usbcore: registered new interface driver cdc_subset
[ 1.244726] usbcore: registered new interface driver cdc_ncm
[ 1.244808] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.244870] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.245132] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.245257] mousedev: PS/2 mouse device common for all mice
[ 1.245427] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 1.245495] pps_ldisc: PPS line discipline registered
[ 1.245557] md: raid1 personality registered for level 1
[ 1.245618] md: raid10 personality registered for level 10
[ 1.245743] md: raid6 personality registered for level 6
[ 1.245804] md: raid5 personality registered for level 5
[ 1.245864] md: raid4 personality registered for level 4
[ 1.245965] device-mapper: uevent: version 1.0.3
[ 1.246078] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 1.246294] TCP: cubic registered
[ 1.246438] NET: Registered protocol family 10
[ 1.246657] NET: Registered protocol family 17
[ 1.246725] Key type dns_resolver registered
[ 1.247165] registered taskstats version 1
[ 1.266590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.560501] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.560631] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.560719] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.732176] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.732258] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.732338] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.732423] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.732499] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.733061] ata2.00: ATA-8: ST2000DM001-1CH164, CC24, max UDMA/133
[ 1.733124] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.733255] ata6.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133
[ 1.733322] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.733567] ata3.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133
[ 1.733641] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.733873] ata5.00: ATA-8: ST2000DM001-1CH164, CC24, max UDMA/133
[ 1.733949] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.734185] ata2.00: configured for UDMA/133
[ 1.734379] ata6.00: configured for UDMA/133
[ 1.734583] ata3.00: configured for UDMA/133
[ 1.734836] ata1.00: ATAPI: PLEXTOR DVDR PX-891SA, 1.04, max UDMA/100
[ 1.734913] ata5.00: configured for UDMA/133
[ 1.735873] ata1.00: configured for UDMA/100
[ 1.738176] scsi 0:0:0:0: CD-ROM PLEXTOR DVDR PX-891SA 1.04 PQ: 0 ANSI: 5
[ 1.745130] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 1.745386] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.745478] scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5
[ 1.745607] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.745656] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.745656] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.745723] scsi 4:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 1.745797] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.745798] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.745853] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.745932] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.745933] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 1.745978] scsi 5:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5
[ 1.746038] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.746040] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.746081] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.746096] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.746098] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[ 1.746179] sd 5:0:0:0: [sdd] Write Protect is off
[ 1.746180] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.746210] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.747156] sd 1:0:0:0: [sda] Write Protect is off
[ 1.747222] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.747254] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.752166] sda: sda1 sda2 sda4
[ 1.752554] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.767725] sdd: sdd1 sdd2 sdd4
[ 1.767858] sdc: sdc1 sdc2 sdc4
[ 1.768185] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 1.768268] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1.768979] sdb: sdb1 sdb2 sdb4
[ 1.769418] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.769721] Freeing unused kernel memory: 832K (ffffffffb673a000 - ffffffffb680a000)
[ 1.771558] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 1.771759] systemd[1]: Running in initial RAM disk.
[ 1.772316] systemd[1]: Failed to insert module 'autofs4'
[ 1.772409] systemd[1]: Set hostname to <surfplank2.hierzo>.
[ 1.772811] random: systemd urandom read with 45 bits of entropy available
[ 1.777258] systemd[1]: Expecting device dev-disk-by\x2duuid-1b97d8cb\x2d9875\x2d49cd\x2db2be\x2d0ce534c1b125.device...
[ 1.777543] systemd[1]: Expecting device dev-mapper-myvg\x2dusrlv.device...
[ 1.777773] systemd[1]: Expecting device dev-mapper-myvg\x2drootlv.device...
[ 1.778003] systemd[1]: Expecting device dev-myvg-rootlv.device...
[ 1.778232] systemd[1]: Starting -.slice.
[ 1.778570] systemd[1]: Created slice -.slice.
[ 1.778637] systemd[1]: Starting System Slice.
[ 1.778962] systemd[1]: Created slice System Slice.
[ 1.779029] systemd[1]: Starting Slices.
[ 1.779319] systemd[1]: Reached target Slices.
[ 1.779386] systemd[1]: Starting Timers.
[ 1.779676] systemd[1]: Reached target Timers.
[ 1.779742] systemd[1]: Starting Journal Socket.
[ 1.780091] systemd[1]: Listening on Journal Socket.
[ 1.780223] systemd[1]: Starting dracut cmdline hook...
[ 1.780683] systemd[1]: Starting Journal Service...
[ 1.783831] systemd[1]: Started Journal Service.
[ 1.926625] systemd-udevd[277]: starting version 208
[ 1.989665] [drm] Initialized drm 1.1.0 20060810
[ 1.991335] QUIRK: Enable AMD PLL fix
[ 1.991349] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.991416] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.991750] xhci_hcd 0000:00:10.0: irq 52 for MSI/MSI-X
[ 1.991757] xhci_hcd 0000:00:10.0: irq 53 for MSI/MSI-X
[ 1.991763] xhci_hcd 0000:00:10.0: irq 54 for MSI/MSI-X
[ 1.991768] xhci_hcd 0000:00:10.0: irq 55 for MSI/MSI-X
[ 1.991774] xhci_hcd 0000:00:10.0: irq 56 for MSI/MSI-X
[ 1.994235] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.994300] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.994392] usb usb1: Product: xHCI Host Controller
[ 1.994453] usb usb1: Manufacturer: Linux 3.16.2 xhci_hcd
[ 1.994515] usb usb1: SerialNumber: 0000:00:10.0
[ 1.995414] [drm] radeon kernel modesetting enabled.
[ 1.995454] hub 1-0:1.0: USB hub found
[ 1.995467] hub 1-0:1.0: 2 ports detected
[ 1.995537] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.995540] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.996260] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.996330] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.996425] usb usb2: Product: xHCI Host Controller
[ 1.996491] usb usb2: Manufacturer: Linux 3.16.2 xhci_hcd
[ 1.996559] usb usb2: SerialNumber: 0000:00:10.0
[ 1.996766] hub 2-0:1.0: USB hub found
[ 1.996839] hub 2-0:1.0: 2 ports detected
[ 1.997090] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.997158] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.997462] xhci_hcd 0000:00:10.1: irq 57 for MSI/MSI-X
[ 1.997469] xhci_hcd 0000:00:10.1: irq 58 for MSI/MSI-X
[ 1.997475] xhci_hcd 0000:00:10.1: irq 59 for MSI/MSI-X
[ 1.997480] xhci_hcd 0000:00:10.1: irq 60 for MSI/MSI-X
[ 1.997485] xhci_hcd 0000:00:10.1: irq 61 for MSI/MSI-X
[ 1.999032] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.999100] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.999193] usb usb3: Product: xHCI Host Controller
[ 1.999257] usb usb3: Manufacturer: Linux 3.16.2 xhci_hcd
[ 1.999320] usb usb3: SerialNumber: 0000:00:10.1
[ 1.999509] hub 3-0:1.0: USB hub found
[ 1.999580] hub 3-0:1.0: 2 ports detected
[ 1.999741] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.999811] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 2.000766] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.000984] ehci-pci: EHCI PCI platform driver
[ 2.001303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.001411] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.001479] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.001577] usb usb4: Product: xHCI Host Controller
[ 2.001643] usb usb4: Manufacturer: Linux 3.16.2 xhci_hcd
[ 2.001710] usb usb4: SerialNumber: 0000:00:10.1
[ 2.001825] ohci-pci: OHCI PCI platform driver
[ 2.001867] hub 4-0:1.0: USB hub found
[ 2.001876] hub 4-0:1.0: 2 ports detected
[ 2.002012] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.002016] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5
[ 2.002182] xhci_hcd 0000:02:00.0: irq 62 for MSI/MSI-X
[ 2.002291] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.002357] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.002470] usb usb5: Product: xHCI Host Controller
[ 2.002542] usb usb5: Manufacturer: Linux 3.16.2 xhci_hcd
[ 2.002570] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1002:0x9901).
[ 2.002580] [drm] register mmio base: 0xFEB00000
[ 2.002581] [drm] register mmio size: 262144
[ 2.002621] ATOM BIOS: 113
[ 2.002738] radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
[ 2.002739] radeon 0000:00:01.0: GTT: 1024M 0x0000000030000000 - 0x000000006FFFFFFF
[ 2.002740] [drm] Detected VRAM RAM=768M, BAR=256M
[ 2.002740] [drm] RAM width 64bits DDR
[ 2.002784] [TTM] Zone kernel: Available graphics memory: 7774866 kiB
[ 2.002784] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.002785] [TTM] Initializing pool allocator
[ 2.002789] [TTM] Initializing DMA pool allocator
[ 2.002807] [drm] radeon: 768M of VRAM memory ready
[ 2.002807] [drm] radeon: 1024M of GTT memory ready.
[ 2.002818] [drm] Loading ARUBA Microcode
[ 2.002862] [drm] Internal thermal controller without fan control
[ 2.002887] == power state 0 ==
[ 2.002888] ui class: none
[ 2.002889] internal class: uvd
[ 2.002889] caps:
[ 2.002890] uvd vclk: 72381 dclk: 60800
[ 2.002892] power level 0 sclk: 80000 vddc: 1199
[ 2.002893] power level 1 sclk: 80000 vddc: 1199
[ 2.002894] status:
[ 2.002894] == power state 1 ==
[ 2.002894] ui class: none
[ 2.002895] internal class: uvd_mvc
[ 2.002895] caps:
[ 2.002896] uvd vclk: 72381 dclk: 60800
[ 2.002898] power level 0 sclk: 80000 vddc: 1199
[ 2.002899] power level 1 sclk: 80000 vddc: 1199
[ 2.002900] status:
[ 2.002900] == power state 2 ==
[ 2.002901] ui class: performance
[ 2.002901] internal class: none
[ 2.002902] caps:
[ 2.002902] uvd vclk: 0 dclk: 0
[ 2.002904] power level 0 sclk: 80000 vddc: 1199
[ 2.002907] power level 1 sclk: 80000 vddc: 1199
[ 2.002908] power level 2 sclk: 80000 vddc: 1199
[ 2.002909] status:
[ 2.002909] == power state 3 ==
[ 2.002909] ui class: none
[ 2.002910] internal class: boot
[ 2.002910] caps:
[ 2.002911] uvd vclk: 0 dclk: 0
[ 2.002912] power level 0 sclk: 20000 vddc: 1274
[ 2.002913] status: c r b
[ 2.002913] == power state 4 ==
[ 2.002914] ui class: none
[ 2.002914] internal class: thermal
[ 2.002915] caps:
[ 2.002915] uvd vclk: 0 dclk: 0
[ 2.002917] power level 0 sclk: 20000 vddc: 937
[ 2.002917] status:
[ 2.003077] [drm] radeon: dpm initialized
[ 2.003195] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.008970] usb usb5: SerialNumber: 0000:02:00.0
[ 2.009166] hub 5-0:1.0: USB hub found
[ 2.009277] hub 5-0:1.0: 2 ports detected
[ 2.009438] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.009541] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 6
[ 2.009723] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.009793] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.009897] usb usb6: Product: xHCI Host Controller
[ 2.009963] usb usb6: Manufacturer: Linux 3.16.2 xhci_hcd
[ 2.010050] usb usb6: SerialNumber: 0000:02:00.0
[ 2.010234] hub 6-0:1.0: USB hub found
[ 2.010338] hub 6-0:1.0: 2 ports detected
[ 2.011739] systemd-udevd[321]: renamed network interface eth0 to enp1s0
[ 2.013680] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.013823] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.014072] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.021099] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[ 2.021291] radeon 0000:00:01.0: WB enabled
[ 2.021362] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0xffff88042b0b8c00
[ 2.022172] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90010335a18
[ 2.022273] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0xffff88042b0b8c04
[ 2.022377] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0xffff88042b0b8c08
[ 2.022475] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0xffff88042b0b8c0c
[ 2.022577] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0xffff88042b0b8c10
[ 2.022674] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.022740] [drm] Driver supports precise vblank timestamp query.
[ 2.022825] radeon 0000:00:01.0: irq 63 for MSI/MSI-X
[ 2.022837] radeon 0000:00:01.0: radeon: using MSI.
[ 2.023903] [drm] radeon: irq initialized.
[ 2.043335] [drm] ring test on 0 succeeded in 2 usecs
[ 2.043466] [drm] ring test on 3 succeeded in 2 usecs
[ 2.043536] [drm] ring test on 4 succeeded in 1 usecs
[ 2.089248] [drm] ring test on 5 succeeded in 2 usecs
[ 2.109135] [drm] UVD initialized successfully.
[ 2.110038] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.110632] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.111213] [drm] ib test on ring 4 succeeded in 1 usecs
[ 2.123268] md: bind<sdb1>
[ 2.133143] [drm] ib test on ring 5 succeeded
[ 2.154012] [drm] Radeon Display Connectors
[ 2.154090] [drm] Connector 0:
[ 2.154157] [drm] HDMI-A-1
[ 2.154224] [drm] HPD1
[ 2.154292] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.154402] [drm] Encoders:
[ 2.154471] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.154541] [drm] Connector 1:
[ 2.154604] [drm] VGA-1
[ 2.154666] [drm] HPD2
[ 2.154731] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.154825] [drm] Encoders:
[ 2.154888] [drm] CRT1: INTERNAL_UNIPHY2
[ 2.154950] [drm] CRT1: NUTMEG
[ 2.155266] [drm] Connector 2:
[ 2.155335] [drm] DVI-D-1
[ 2.155404] md: bind<sda1>
[ 2.156004] [drm] HPD3
[ 2.156078] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 2.156179] [drm] Encoders:
[ 2.156252] [drm] DFP2: INTERNAL_UNIPHY
[ 2.162433] random: nonblocking pool is initialized
[ 2.163390] tsc: Refined TSC clocksource calibration: 3872.259 MHz
[ 2.164551] md: bind<sdc1>
[ 2.171432] md: bind<sdb2>
[ 2.180610] md: bind<sdd1>
[ 2.182985] md/raid1:md0: active with 4 out of 4 mirrors
[ 2.183077] md0: detected capacity change from 0 to 536805376
[ 2.183726] md: bind<sda2>
[ 2.184238] md0: unknown partition table
[ 2.193715] md: bind<sdc2>
[ 2.219310] switching from power state:
[ 2.219380] ui class: none
[ 2.219471] internal class: boot
[ 2.219589] caps:
[ 2.219679] uvd vclk: 0 dclk: 0
[ 2.219741] power level 0 sclk: 20000 vddc: 1274
[ 2.219802] status: c b
[ 2.219950] switching to power state:
[ 2.220010] ui class: performance
[ 2.220101] internal class: none
[ 2.220219] caps:
[ 2.220307] uvd vclk: 0 dclk: 0
[ 2.220369] power level 0 sclk: 80000 vddc: 1199
[ 2.220431] power level 1 sclk: 80000 vddc: 1199
[ 2.220492] power level 2 sclk: 80000 vddc: 1199
[ 2.220553] status: r
[ 2.303282] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 2.336146] [drm] fb mappable at 0xC047A000
[ 2.336192] [drm] vram apper at 0xC0000000
[ 2.336236] [drm] size 7299072
[ 2.336279] [drm] fb depth is 24
[ 2.336321] [drm] pitch is 6912
[ 2.336496] fbcon: radeondrmfb (fb0) is primary device
[ 2.408979] Console: switching to colour frame buffer device 210x65
[ 2.412273] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 2.412293] radeon 0000:00:01.0: registered panic notifier
[ 2.427106] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[ 2.427309] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.427343] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 7
[ 2.427373] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.427413] ehci-pci 0000:00:12.2: debug port 1
[ 2.427759] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 2.438986] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.439058] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.439080] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.439104] usb usb7: Product: EHCI Host Controller
[ 2.439120] usb usb7: Manufacturer: Linux 3.16.2 ehci_hcd
[ 2.439138] usb usb7: SerialNumber: 0000:00:12.2
[ 2.439268] hub 7-0:1.0: USB hub found
[ 2.439313] hub 7-0:1.0: 5 ports detected
[ 2.439316] md: bind<sdd2>
[ 2.439554] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.439577] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8
[ 2.439601] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.439636] ehci-pci 0000:00:13.2: debug port 1
[ 2.439714] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 2.441641] md/raid10:md1: active with 4 out of 4 devices
[ 2.441700] md1: detected capacity change from 0 to 3997621551104
[ 2.448026] md1: unknown partition table
[ 2.450957] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.451063] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.451094] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.451118] usb usb8: Product: EHCI Host Controller
[ 2.451134] usb usb8: Manufacturer: Linux 3.16.2 ehci_hcd
[ 2.451152] usb usb8: SerialNumber: 0000:00:13.2
[ 2.451296] hub 8-0:1.0: USB hub found
[ 2.451315] hub 8-0:1.0: 5 ports detected
[ 2.451571] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.451603] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
[ 2.451706] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 2.451823] usb 1-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 2.451850] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.451879] usb 1-1: Product: Block Erupter Sapphire
[ 2.452679] usb 1-1: Manufacturer: Bitfountain
[ 2.453444] usb 1-1: SerialNumber: Foo-10000019
[ 2.510950] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.511745] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.512530] usb usb9: Product: OHCI PCI host controller
[ 2.513325] usb usb9: Manufacturer: Linux 3.16.2 ohci_hcd
[ 2.514117] usb usb9: SerialNumber: 0000:00:12.0
[ 2.515109] hub 9-0:1.0: USB hub found
[ 2.515906] hub 9-0:1.0: 5 ports detected
[ 2.516879] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.517673] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
[ 2.518594] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 2.574767] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 2.578972] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.579884] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.579885] usb usb10: Product: OHCI PCI host controller
[ 2.579886] usb usb10: Manufacturer: Linux 3.16.2 ohci_hcd
[ 2.579888] usb usb10: SerialNumber: 0000:00:13.0
[ 2.579998] hub 10-0:1.0: USB hub found
[ 2.580006] hub 10-0:1.0: 5 ports detected
[ 2.580207] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.580212] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
[ 2.580268] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 2.638698] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.639609] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.640514] usb usb11: Product: OHCI PCI host controller
[ 2.641421] usb usb11: Manufacturer: Linux 3.16.2 ohci_hcd
[ 2.642323] usb usb11: SerialNumber: 0000:00:14.5
[ 2.643460] hub 11-0:1.0: USB hub found
[ 2.644426] hub 11-0:1.0: 2 ports detected
[ 2.724508] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60
[ 2.725420] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.726320] usb 1-2: Product: CP2102 USB to UART Bridge Controller
[ 2.727250] usb 1-2: Manufacturer: Silicon Labs
[ 2.728147] usb 1-2: SerialNumber: 0001
[ 2.846253] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 3.161842] Switched to clocksource tsc
[ 3.171775] usb 3-1: New USB device found, idVendor=046d, idProduct=082c
[ 3.172730] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[ 3.173677] usb 3-1: Product: HD Webcam C615
[ 3.174604] usb 3-1: SerialNumber: F6629A60
[ 3.285572] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[ 3.587288] usb 5-1: New USB device found, idVendor=0471, idProduct=0311
[ 3.588246] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 3.589196] usb 5-1: SerialNumber: 01690000A5000000
[ 3.700929] usb 7-1: new high-speed USB device number 2 using ehci-pci
[ 3.833249] usb 7-1: New USB device found, idVendor=1a40, idProduct=0101
[ 3.834198] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.835127] usb 7-1: Product: USB 2.0 Hub
[ 3.836822] hub 7-1:1.0: USB hub found
[ 3.838072] hub 7-1:1.0: 4 ports detected
[ 3.948507] usb 7-4: new high-speed USB device number 3 using ehci-pci
[ 4.080936] usb 7-4: New USB device found, idVendor=1a40, idProduct=0101
[ 4.081898] usb 7-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.082836] usb 7-4: Product: USB 2.0 Hub
[ 4.084450] hub 7-4:1.0: USB hub found
[ 4.085795] hub 7-4:1.0: 4 ports detected
[ 4.403680] usb 10-5: new low-speed USB device number 2 using ohci-pci
[ 4.570632] usb 10-5: New USB device found, idVendor=046d, idProduct=c018
[ 4.571600] usb 10-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.572535] usb 10-5: Product: USB Optical Mouse
[ 4.573472] usb 10-5: Manufacturer: Logitech
[ 4.580739] usbcore: registered new interface driver usbhid
[ 4.581717] usbhid: USB HID core driver
[ 4.583116] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb10/10-5/10-5:1.0/0003:046D:C018.0001/input/input2
[ 4.584193] hid-generic 0003:046D:C018.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-5/input0
[ 4.647538] usb 7-1.1: new high-speed USB device number 4 using ehci-pci
[ 4.740039] usb 7-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 4.741058] usb 7-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.742057] usb 7-1.1: Product: USB 2.0 Hub
[ 4.743524] hub 7-1.1:1.0: USB hub found
[ 4.744716] hub 7-1.1:1.0: 4 ports detected
[ 4.815179] usb 7-1.2: new full-speed USB device number 5 using ehci-pci
[ 4.909424] usb 7-1.2: New USB device found, idVendor=10c4, idProduct=ea60
[ 4.910410] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.911411] usb 7-1.2: Product: Block Erupter Sapphire
[ 4.912374] usb 7-1.2: Manufacturer: Bitfountain
[ 4.913321] usb 7-1.2: SerialNumber: Foo-10000024
[ 4.986923] usb 7-1.4: new full-speed USB device number 6 using ehci-pci
[ 5.081301] usb 7-1.4: New USB device found, idVendor=10c4, idProduct=ea60
[ 5.082284] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.083273] usb 7-1.4: Product: CP2102 USB to UART Bridge Controller
[ 5.084256] usb 7-1.4: Manufacturer: Silicon Labs
[ 5.085219] usb 7-1.4: SerialNumber: 0001
[ 5.286433] usb 7-4.1: new high-speed USB device number 7 using ehci-pci
[ 5.379626] usb 7-4.1: New USB device found, idVendor=1a40, idProduct=0101
[ 5.380608] usb 7-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.381560] usb 7-4.1: Product: USB 2.0 Hub
[ 5.383140] hub 7-4.1:1.0: USB hub found
[ 5.384319] hub 7-4.1:1.0: 4 ports detected
[ 5.458125] usb 7-4.3: new full-speed USB device number 8 using ehci-pci
[ 5.552507] usb 7-4.3: New USB device found, idVendor=10c4, idProduct=ea60
[ 5.553457] usb 7-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.554416] usb 7-4.3: Product: CP2102 USB to UART Bridge Controller
[ 5.555370] usb 7-4.3: Manufacturer: Silicon Labs
[ 5.556299] usb 7-4.3: SerialNumber: 0001
[ 5.629808] usb 7-4.4: new full-speed USB device number 9 using ehci-pci
[ 5.723899] usb 7-4.4: New USB device found, idVendor=10c4, idProduct=ea60
[ 5.724851] usb 7-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.725810] usb 7-4.4: Product: Block Erupter Sapphire
[ 5.725811] usb 7-4.4: Manufacturer: Bitfountain
[ 5.725813] usb 7-4.4: SerialNumber: Foo-10000020
[ 5.797565] usb 7-1.1.1: new full-speed USB device number 10 using ehci-pci
[ 5.893138] usb 7-1.1.1: New USB device found, idVendor=04d8, idProduct=f5fe
[ 5.894072] usb 7-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.894992] usb 7-1.1.1: Product: TrueRNG
[ 5.895908] usb 7-1.1.1: Manufacturer: ubld.it
[ 5.969343] usb 7-1.1.3: new full-speed USB device number 11 using ehci-pci
[ 6.063533] usb 7-1.1.3: New USB device found, idVendor=10c4, idProduct=ea60
[ 6.064473] usb 7-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.065419] usb 7-1.1.3: Product: Block Erupter Sapphire
[ 6.066337] usb 7-1.1.3: Manufacturer: Bitfountain
[ 6.067248] usb 7-1.1.3: SerialNumber: Foo-10000021
[ 6.141006] usb 7-4.1.3: new full-speed USB device number 12 using ehci-pci
[ 6.235224] usb 7-4.1.3: New USB device found, idVendor=10c4, idProduct=ea60
[ 6.236177] usb 7-4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.237136] usb 7-4.1.3: Product: Block Erupter Sapphire
[ 6.238081] usb 7-4.1.3: Manufacturer: Bitfountain
[ 6.239011] usb 7-4.1.3: SerialNumber: Foo-10000023
[ 6.312771] usb 7-4.1.4: new full-speed USB device number 13 using ehci-pci
[ 6.407453] usb 7-4.1.4: New USB device found, idVendor=10c4, idProduct=ea60
[ 6.408461] usb 7-4.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.409430] usb 7-4.1.4: Product: CP2102 USB to UART Bridge Controller
[ 6.410379] usb 7-4.1.4: Manufacturer: Silicon Labs
[ 6.411327] usb 7-4.1.4: SerialNumber: 0001
[ 11.985337] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[ 11.986206] EXT4-fs (dm-1): write access will be enabled during recovery
[ 12.155200] EXT4-fs (dm-1): recovery complete
[ 12.180346] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.805669] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.861111] systemd-journald[131]: Received SIGTERM
[ 15.016864] RPC: Registered named UNIX socket transport module.
[ 15.017675] RPC: Registered udp transport module.
[ 15.018479] RPC: Registered tcp transport module.
[ 15.019243] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.087912] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 15.451587] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 15.453146] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 15.459278] systemd-udevd[880]: starting version 208
[ 16.121693] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 16.122760] ACPI: Power Button [PWRB]
[ 16.124094] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 16.125296] ACPI: Power Button [PWRF]
[ 16.129852] acpi-cpufreq: overriding BIOS provided _PSD data
[ 16.193028] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 16.194170] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 16.235816] systemd-udevd[899]: renamed network interface enp1s0 to eth0
[ 16.401027] cdc_acm 7-1.1.1:1.0: This device cannot do calls on its own. It is not a modem.
[ 16.403607] cdc_acm 7-1.1.1:1.0: ttyACM0: USB ACM device
[ 16.406474] usbcore: registered new interface driver cdc_acm
[ 16.409028] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 16.421238] Linux video capture interface: v2.00
[ 16.487957] usbcore: registered new interface driver usbserial
[ 16.489542] usbcore: registered new interface driver usbserial_generic
[ 16.491081] usbserial: USB Serial support registered for generic
[ 16.496830] usbcore: registered new interface driver cp210x
[ 16.498576] usbserial: USB Serial support registered for cp210x
[ 16.500282] cp210x 1-1:1.0: cp210x converter detected
[ 16.521745] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 16.523616] snd_hda_intel 0000:00:01.1: irq 64 for MSI/MSI-X
[ 16.573191] sound hdaudioC0D0: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 16.574692] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.575995] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.577278] sound hdaudioC0D0: mono: mono_out=0x0
[ 16.578564] sound hdaudioC0D0: dig-out=0x3/0x0
[ 16.579848] sound hdaudioC0D0: inputs:
[ 16.584877] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 16.586168] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.587364] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 16.588511] sound hdaudioC1D0: mono: mono_out=0x0
[ 16.589638] sound hdaudioC1D0: dig-out=0x11/0x1e
[ 16.590749] sound hdaudioC1D0: inputs:
[ 16.591963] sound hdaudioC1D0: Front Mic=0x19
[ 16.593212] sound hdaudioC1D0: Rear Mic=0x18
[ 16.594438] sound hdaudioC1D0: Line=0x1a
[ 16.613958] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input5
[ 16.618003] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[ 16.619422] xhci_hcd 0000:00:10.0: Setup ERROR: setup context command for slot 1.
[ 16.621014] usb 1-1: hub failed to enable device, error -22
[ 16.626110] pwc: Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.
[ 16.638356] uvcvideo: Found UVC 1.00 device HD Webcam C615 (046d:082c)
[ 16.654446] input: HD Webcam C615 as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.2/input/input6
[ 16.656481] usbcore: registered new interface driver uvcvideo
[ 16.658445] USB Video Class driver (1.1.1)
[ 16.786897] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[ 16.789906] xhci_hcd 0000:00:10.0: Setup ERROR: setup context command for slot 1.
[ 16.792889] usb 1-1: hub failed to enable device, error -22
[ 16.818437] microcode: CPU0: patch_level=0x06001119
[ 16.865532] microcode: CPU1: patch_level=0x06001119
[ 16.868153] microcode: CPU2: patch_level=0x06001119
[ 16.870792] microcode: CPU3: patch_level=0x06001119
[ 16.873162] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 16.873167] pwc: Registered as video1.
[ 16.873238] input: PWC snapshot button as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/usb5/5-1/input/input7
[ 16.873384] usbcore: registered new interface driver Philips webcam
[ 16.873493] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 16.873501] usb 5-1: Not enough bandwidth for altsetting 1
[ 16.873536] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 16.873540] usb 5-1: Not enough bandwidth for altsetting 2
[ 16.873573] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 16.873578] usb 5-1: Not enough bandwidth for altsetting 3
[ 16.873610] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 16.873614] usb 5-1: Not enough bandwidth for altsetting 4
[ 16.906641] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[ 16.929846] usbcore: registered new interface driver snd-usb-audio
[ 16.939430] xhci_hcd 0000:00:10.0: xHCI xhci_drop_endpoint called with disabled ep ffff88042b27d5c8
[ 16.940895] xhci_hcd 0000:00:10.0: xHCI xhci_drop_endpoint called with disabled ep ffff88042b27d580
[ 16.944496] usb 1-1: cp210x converter now attached to ttyUSB0
[ 16.946480] cp210x 1-2:1.0: cp210x converter detected
[ 16.959234] kvm: Nested Virtualization enabled
[ 16.960461] kvm: Nested Paging enabled
[ 17.061297] usb 1-2: reset full-speed USB device number 3 using xhci_hcd
[ 17.064195] xhci_hcd 0000:00:10.0: Setup ERROR: setup context command for slot 2.
[ 17.066902] usb 1-2: hub failed to enable device, error -22
[ 17.234194] usb 1-2: reset full-speed USB device number 3 using xhci_hcd
[ 17.234269] xhci_hcd 0000:00:10.0: Setup ERROR: setup context command for slot 2.
[ 17.234276] usb 1-2: hub failed to enable device, error -22
[ 17.348820] usb 1-2: reset full-speed USB device number 3 using xhci_hcd
[ 17.377727] xhci_hcd 0000:00:10.0: xHCI xhci_drop_endpoint called with disabled ep ffff88042b2f1088
[ 17.380666] xhci_hcd 0000:00:10.0: xHCI xhci_drop_endpoint called with disabled ep ffff88042b2f1040
[ 17.385908] usb 1-2: cp210x converter now attached to ttyUSB1
[ 17.389011] cp210x 7-1.2:1.0: cp210x converter detected
[ 17.461743] usb 7-1.2: reset full-speed USB device number 5 using ehci-pci
[ 17.563312] usb 7-1.2: cp210x converter now attached to ttyUSB2
[ 17.566415] cp210x 7-1.4:1.0: cp210x converter detected
[ 17.641432] usb 7-1.4: reset full-speed USB device number 6 using ehci-pci
[ 17.673393] ppdev: user-space parallel port driver
[ 17.735646] usb 7-1.4: cp210x converter now attached to ttyUSB3
[ 17.738858] cp210x 7-4.3:1.0: cp210x converter detected
[ 17.813117] usb 7-4.3: reset full-speed USB device number 8 using ehci-pci
[ 17.916831] usb 7-4.3: cp210x converter now attached to ttyUSB4
[ 17.919253] cp210x 7-4.4:1.0: cp210x converter detected
[ 17.992785] usb 7-4.4: reset full-speed USB device number 9 using ehci-pci
[ 18.086027] usb 7-4.4: cp210x converter now attached to ttyUSB5
[ 18.090600] cp210x 7-1.1.3:1.0: cp210x converter detected
[ 18.160609] usb 7-1.1.3: reset full-speed USB device number 11 using ehci-pci
[ 18.206313] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 18.231585] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 18.253826] usb 7-1.1.3: cp210x converter now attached to ttyUSB6
[ 18.257185] cp210x 7-4.1.3:1.0: cp210x converter detected
[ 18.332299] usb 7-4.1.3: reset full-speed USB device number 12 using ehci-pci
[ 18.425622] usb 7-4.1.3: cp210x converter now attached to ttyUSB7
[ 18.429021] cp210x 7-4.1.4:1.0: cp210x converter detected
[ 18.504109] usb 7-4.1.4: reset full-speed USB device number 13 using ehci-pci
[ 18.601216] usb 7-4.1.4: cp210x converter now attached to ttyUSB8
[ 19.124427] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 19.867297] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 19.938805] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 20.511335] Adding 1023996k swap on /dev/mapper/swapb. Priority:-1 extents:1 across:1023996k
[ 20.520818] Adding 1023996k swap on /dev/mapper/swapa. Priority:-2 extents:1 across:1023996k
[ 20.526651] Adding 1023996k swap on /dev/mapper/swapc. Priority:-3 extents:1 across:1023996k
[ 28.630996] Adding 1023996k swap on /dev/mapper/swapd. Priority:-4 extents:1 across:1023996k
[ 43.647404] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[ 45.279156] systemd-journald[851]: Received request to flush runtime journal from PID 1
[ 45.506664] systemd-journald[851]: File /var/log/journal/6bc32011e81922c063bab4ec493561d1/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 45.858064] audit: type=1305 audit(1411477308.732:2): audit_pid=1269 old=0 auid=4294967295 ses=4294967295 res=1
[ 46.191099] pps pps0: new PPS source serial2
[ 46.193103] pps pps0: source "/dev/ttyS2" added
[ 46.277903] it87: Found IT8728F chip at 0x228, revision 1
[ 46.279771] it87: Beeping is supported
[ 46.514816] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.521947] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 46.662546] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 47.864487] r8169 0000:01:00.0 eth0: link down
[ 47.864558] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 47.864565] r8169 0000:01:00.0 eth0: link down
[ 48.661576] EDAC MC: Ver: 3.0.0
[ 50.165703] r8169 0000:01:00.0 eth0: link up
[ 50.165717] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 52.649385] NFSD: starting 90-second grace period (net ffffffffb6717480)
[ 58.023351] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.023358] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.023360] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.023388] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.023391] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.023393] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.023485] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.023488] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.023490] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.023735] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.023739] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.023741] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.023908] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.023910] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.023912] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.024157] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.024160] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.024162] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.024284] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.024295] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.024298] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.024373] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.024377] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.024379] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.024632] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.024635] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.024637] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.024815] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.024818] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.024819] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.025265] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.025272] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.025275] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.025333] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.025337] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.025339] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.025453] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.025458] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.025460] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.025730] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.025735] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.025738] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.026011] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.026016] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.026020] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.026597] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.026602] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.026605] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.026662] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.026666] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.026669] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.026794] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.026798] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.026801] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.027108] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.027114] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.027117] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.027459] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.027464] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.027467] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.721784] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.721793] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.721796] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.721869] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.721871] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.721873] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.721911] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.721913] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.721915] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.722148] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.722151] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.722152] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.722294] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.722296] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.722298] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.722597] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.722602] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.722603] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.722638] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.722640] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.722642] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.722679] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.722682] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.722683] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.722831] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.722833] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.722835] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.723040] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.723045] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.723047] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.723366] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.723369] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.723372] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.723419] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.723422] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.723423] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.723527] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.723529] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.723531] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.723772] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.723774] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.723776] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.723996] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.724015] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.724018] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.724532] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.724535] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.724537] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.724582] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.724587] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.724589] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.724672] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.724674] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.724676] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.724936] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.724939] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.724941] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.725133] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.725135] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.725137] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.733194] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.733225] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.733228] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.733270] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.733275] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.733278] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.733326] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.733330] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.733332] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.733630] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.733634] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.733636] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.733840] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.733843] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.733846] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.734133] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.734137] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.734140] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.734986] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.734992] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.734994] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.735070] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.735074] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.735076] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.735326] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.735329] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.735331] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.735557] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.735561] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.735564] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.736048] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.736053] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.736055] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.736113] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.736119] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.736122] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.736254] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.736258] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.736261] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.736655] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.736661] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.736664] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.737003] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.737008] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.737011] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.737597] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.737601] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.737603] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.737654] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.737657] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.737659] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.737758] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.737761] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.737763] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.738045] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.738048] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.738050] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.738282] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.738285] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.738287] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.746919] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.746926] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.746929] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.746959] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.746962] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.746964] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.747000] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.747003] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.747005] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.747239] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.747242] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.747244] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.747432] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.747435] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.747437] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.747653] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.747656] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.747658] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.747694] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.747697] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.747698] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.747733] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.747735] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.747737] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.748040] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.748044] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.748047] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.748273] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.748277] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.748279] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.748653] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.748657] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.748659] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.748699] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.748701] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.748703] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.748785] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.748788] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.748790] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.749005] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.749007] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.749009] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.749195] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.749198] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.749200] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.749599] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.749602] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.749604] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.749647] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.749650] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.749652] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.749732] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.749735] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.749737] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.749922] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.749925] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.749928] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.750118] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.750120] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.750122] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757088] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757094] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757096] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757128] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757130] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757132] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757167] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757169] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757171] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757416] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757419] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757420] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757561] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757563] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757565] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757753] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757756] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757757] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757789] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757791] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757793] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757827] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757830] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757831] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.757969] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.757971] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.757973] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.758107] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.758109] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.758111] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.758357] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.758361] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.758363] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.758416] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.758419] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.758420] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.758492] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.758494] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.758496] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.758680] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.758682] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.758684] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.758845] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.758848] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.758849] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.759199] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.759202] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.759203] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.759243] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.759246] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.759247] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.759321] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.759323] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.759325] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.759588] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.759592] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.759593] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.759794] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.759796] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.759798] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.766605] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.766611] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.766614] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.766640] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.766643] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.766645] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.766683] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.766686] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.766687] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.766918] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.766921] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.766922] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767064] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.767067] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.767068] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767250] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.767254] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.767255] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767292] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.767294] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.767296] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767333] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.767335] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.767337] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767470] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.767473] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.767474] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767605] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.767607] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.767608] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767840] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.767843] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.767845] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767880] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.767882] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.767883] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.767999] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.768005] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.768009] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.768241] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.768244] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.768246] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.768430] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.768433] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.768434] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.768806] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.768809] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.768811] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.768852] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.768854] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.768856] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.768933] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.768935] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.768937] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.769115] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.769117] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.769119] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 58.769284] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 58.769287] usb 5-1: Not enough bandwidth for altsetting 1
[ 58.769288] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 217.802471] fuse init (API version 7.23)
[ 219.402715] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.402725] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.402729] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.402822] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.402828] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.402839] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.402932] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.402936] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.402939] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.403248] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.403252] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.403254] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.403472] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.403476] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.403478] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.403818] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.403823] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.403826] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.403863] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.403867] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.403869] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.403915] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.403918] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.403920] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.404118] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.404121] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.404124] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.404330] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.404333] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.404336] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.404735] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.404740] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.404743] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.404796] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.404800] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.404802] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.404910] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.404914] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.404916] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.405171] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.405174] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.405177] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.405436] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.405440] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.405442] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.405985] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.405990] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.405992] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.406045] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.406049] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.406051] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.406165] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.406168] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.406171] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.406424] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.406428] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.406430] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.406693] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.406697] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.406699] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.416556] snd_hda_intel 0000:00:01.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 219.806824] Bluetooth: Core ver 2.19
[ 219.806854] NET: Registered protocol family 31
[ 219.806858] Bluetooth: HCI device and connection manager initialized
[ 219.806873] Bluetooth: HCI socket layer initialized
[ 219.806880] Bluetooth: L2CAP socket layer initialized
[ 219.806896] Bluetooth: SCO socket layer initialized
[ 219.886934] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.886951] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.886958] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.887119] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.887127] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.887133] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.887214] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.887223] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.887228] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.887586] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 219.887592] Bluetooth: BNEP filters: protocol multicast
[ 219.887601] Bluetooth: BNEP socket layer initialized
[ 219.887778] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.887789] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.887794] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.888260] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.888268] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.888273] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.888876] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.888886] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.888893] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.888951] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.888958] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.888962] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.889067] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.889075] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.889079] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.890074] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.890087] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.890093] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.890587] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.890595] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.890600] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.891402] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.891410] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.891416] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.891499] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.891507] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.891512] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.891715] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.891723] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.891729] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.892232] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.892238] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.892242] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.892719] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.892727] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.892732] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.893807] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.893817] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.893822] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.893906] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.893912] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.893917] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.894123] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.894127] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.894129] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.894387] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.894390] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.894392] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.894590] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.894592] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.894594] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.905385] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.905392] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.905395] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.905424] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.905427] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.905429] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.905470] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.905473] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.905475] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.905716] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.905719] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.905721] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.905991] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.905995] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.905998] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.906332] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.906336] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.906339] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.906380] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.906384] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.906387] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.906437] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.906440] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.906443] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.906652] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.906656] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.906659] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.906857] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.906861] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.906864] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.907246] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.907251] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.907253] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.907305] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.907309] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.907311] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.907416] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.907420] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.907423] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.907699] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.907703] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.907706] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.907953] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.907957] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.907960] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.908479] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.908484] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.908486] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.908539] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.908543] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.908546] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.908654] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.908658] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.908660] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.908940] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.908944] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.908947] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.909226] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.909230] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.909233] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.918635] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.918646] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.918652] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.918708] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.918714] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.918719] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.918775] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.918780] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.918783] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.919138] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.919143] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.919146] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.919422] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.919427] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.919430] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.919807] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.919814] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.919817] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.919862] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.919866] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.919869] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.919924] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.919928] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.919931] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.920184] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.920188] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.920191] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.920443] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.920447] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.920450] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.920913] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.920921] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.920924] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.920994] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.920999] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.921002] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.921135] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.921140] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.921143] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.921471] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.921475] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.921478] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.921901] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.921905] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.921918] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.922732] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.922739] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.922742] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.922812] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.922816] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.922820] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.922959] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.922963] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.922966] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.923579] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.923587] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.923593] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.924120] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.924127] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.924132] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.937988] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.937997] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.938001] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.938047] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.938053] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.938056] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.938108] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.938113] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.938117] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.938536] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.938540] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.938544] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.938886] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.938890] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.938893] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.939367] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.939374] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.939377] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.939428] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.939432] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.939435] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.939486] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.939491] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.939494] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.939749] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.939754] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.939757] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.940053] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.940057] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.940060] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.940607] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.940613] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.940617] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.940678] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.940682] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.940685] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.940813] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.940817] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.940820] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.941230] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.941235] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.941238] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.941622] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.941627] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.941630] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.942375] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.942384] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.942388] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.942447] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.942450] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.942453] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.942573] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.942577] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.942579] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.942883] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.942887] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.942889] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.943172] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.943176] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.943178] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.954054] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.954060] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.954063] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.954096] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.954099] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.954100] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.954137] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.954139] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.954141] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.954411] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.954414] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.954416] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.954668] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.954671] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.954672] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.955014] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.955018] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.955020] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.955054] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.955057] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.955058] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.955093] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.955095] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.955097] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.955274] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.955277] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.955279] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.955457] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.955459] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.955461] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.955844] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.955847] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.955849] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.955894] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.955897] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.955899] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.955977] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.955980] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.955982] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.956255] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.956258] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.956260] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.956458] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.956460] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.956462] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.956932] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.956936] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.956938] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.956982] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.956984] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.956986] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.957068] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.957071] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.957072] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.957270] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.957272] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.957274] usb 5-1: 2:1: usb_set_interface failed (-22)
[ 219.957463] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 219.957466] usb 5-1: Not enough bandwidth for altsetting 1
[ 219.957467] usb 5-1: 2:1: usb_set_interface failed (-22)