Re: [PATCH 1/2] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC

[Krzysztof KozÅowski]

On 14.10.2014 10:14, Thomas Abraham wrote:
> Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
> is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
> 
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mfd/s2mps11.txt |   11 ++++++++---
>  1 files changed, 8 insertions(+), 3 deletions(-)

Looks good.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>

P.S. Wrong devicetree-discuss@xxxxxxxxxxxxxxxx list? I receive bounces.

Best regards,
Krzysztof


> 
> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index 0e4026a..41ee3f5 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -1,5 +1,5 @@
>  
> -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
> +* Samsung S2MPS11/14/15 and S2MPU02 Voltage and Current Regulator
>  
>  The Samsung S2MPS11 is a multi-function device which includes voltage and
>  current regulators, RTC, charger controller and other sub-blocks. It is
> @@ -7,8 +7,11 @@ interfaced to the host controller using an I2C interface. Each sub-block is
>  addressed by the host system using different I2C slave addresses.
>  
>  Required properties:
> -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
> -              or "samsung,s2mpu02-pmic".
> +- compatible: Should be one of the following
> +	- "samsung,s2mps11-pmic"
> +	- "samsung,s2mps14-pmic"
> +	- "samsung,s2mps15-pmic"
> +	- "samsung,s2mpu02-pmic"
>  - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
>  
>  Optional properties:
> @@ -82,12 +85,14 @@ as per the datasheet of s2mps11.
>  		  - valid values for n are:
>  			- S2MPS11: 1 to 38
>  			- S2MPS14: 1 to 25
> +			- S2MPS15: 1 to 27
>  			- S2MPU02: 1 to 28
>  		  - Example: LDO1, LDO2, LDO28
>  	- BUCKn
>  		  - valid values for n are:
>  			- S2MPS11: 1 to 10
>  			- S2MPS14: 1 to 5
> +			- S2MPS15: 1 to 10
>  			- S2MPU02: 1 to 7
>  		  - Example: BUCK1, BUCK2, BUCK9
>  
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/