[PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO

From: Jani Nikula
Date: Fri Oct 17 2014 - 17:16:11 EST


Documentation/kbuild/kconfig-language.txt warns to use select with care,
and in general use select only for non-visible symbols and for symbols
with no dependencies, because select will force a symbol to a value
without visiting the dependencies.

Select has become particularly problematic, interdependently, with the
BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO configs. For example:

scripts/kconfig/conf --randconfig Kconfig
KCONFIG_SEED=0x48312B00
warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 &&
DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY
&& FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI &&
EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE
which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)
warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 &&
DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY
&& FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI &&
EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE
which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)

With tristates it's possible to end up selecting FOO=y depending on
BAR=m in the config, which gets discovered at build time, not config
time, like reported in the thread referenced below.

Do the following to fix the dependencies:

* Depend on instead of select BACKLIGHT_CLASS_DEVICE everywhere. Drop
select BACKLIGHT_LCD_SUPPORT in such cases, as it's a dependency of
BACKLIGHT_CLASS_DEVICE.

* Remove config FB_BACKLIGHT altogether, and replace it with a
dependency on BACKLIGHT_CLASS_DEVICE. All configs selecting
FB_BACKLIGHT select or depend on FB anyway, so we can simplify.

* Depend on (ACPI && ACPI_VIDEO) || ACPI=n in several places instead of
selecting ACPI_VIDEO and a number of its dependencies if ACPI is
enabled. This is tied to backlight, as ACPI_VIDEO depends on
BACKLIGHT_CLASS_DEVICE.

* Replace a couple of select INPUT/VT with depends as it seemed to be
necessary.

Reference: http://lkml.kernel.org/r/CA+r1ZhhmT4DrWtf6MbRQo5EqXwx+LxCqh15Vsu_d9WpftLhnxw@xxxxxxxxxxxxxx
Reported-by: Jim Davis <jim.epost@xxxxxxxxx>
Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Darren Hart <dvhart@xxxxxxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Jens Frederich <jfrederich@xxxxxxxxx>
Cc: Daniel Drake <dsd@xxxxxxxxxx>
Cc: Jon Nettleton <jon.nettleton@xxxxxxxxx>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@xxxxxxxxxxxx>
Cc: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>

---

Sorry for the huge distribution; this is really quite hard to split up
sensibly without breaking the build!
---
drivers/gpu/drm/Kconfig | 2 +-
drivers/gpu/drm/gma500/Kconfig | 4 +---
drivers/gpu/drm/i915/Kconfig | 9 ++-------
drivers/gpu/drm/nouveau/Kconfig | 10 ++--------
drivers/gpu/drm/shmobile/Kconfig | 2 +-
drivers/gpu/drm/tilcdc/Kconfig | 3 +--
drivers/macintosh/Kconfig | 2 +-
drivers/platform/x86/Kconfig | 19 ++++++++-----------
drivers/staging/olpc_dcon/Kconfig | 2 +-
drivers/usb/misc/Kconfig | 3 +--
drivers/video/fbdev/Kconfig | 29 +++++++++++------------------
drivers/video/fbdev/core/fbsysfs.c | 8 ++++----
include/linux/fb.h | 2 +-
include/uapi/linux/fb.h | 2 +-
14 files changed, 36 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index e3b4b0f02b3d..dc789d0e293c 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -99,6 +99,7 @@ config DRM_R128
config DRM_RADEON
tristate "ATI Radeon"
depends on DRM && PCI
+ depends on BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=n
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -108,7 +109,6 @@ config DRM_RADEON
select DRM_TTM
select POWER_SUPPLY
select HWMON
- select BACKLIGHT_CLASS_DEVICE
select INTERVAL_TREE
select MMU_NOTIFIER
help
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig
index 17f928ec84ea..a84d0a4fcc58 100644
--- a/drivers/gpu/drm/gma500/Kconfig
+++ b/drivers/gpu/drm/gma500/Kconfig
@@ -8,9 +8,7 @@ config DRM_GMA500
select DRM_KMS_FB_HELPER
select DRM_TTM
# GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915
- select ACPI_VIDEO if ACPI
- select BACKLIGHT_CLASS_DEVICE if ACPI
- select INPUT if ACPI
+ depends on (ACPI && ACPI_VIDEO) || ACPI=n
help
Say yes for an experimental 2D KMS framebuffer driver for the
Intel GMA500 ('Poulsbo') and other Intel IMG based graphics
diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig
index 4e39ab34eb1c..75d4c52c0971 100644
--- a/drivers/gpu/drm/i915/Kconfig
+++ b/drivers/gpu/drm/i915/Kconfig
@@ -3,6 +3,8 @@ config DRM_I915
depends on DRM
depends on X86 && PCI
depends on (AGP || AGP=n)
+ depends on (ACPI && ACPI_VIDEO) || ACPI=n
+ depends on BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=n
select INTEL_GTT
select AGP_INTEL if AGP
select INTERVAL_TREE
@@ -11,13 +13,6 @@ config DRM_I915
select SHMEM
select TMPFS
select DRM_KMS_HELPER
- # i915 depends on ACPI_VIDEO when ACPI is enabled
- # but for select to work, need to select ACPI_VIDEO's dependencies, ick
- select BACKLIGHT_LCD_SUPPORT if ACPI
- select BACKLIGHT_CLASS_DEVICE if ACPI
- select INPUT if ACPI
- select ACPI_VIDEO if ACPI
- select ACPI_BUTTON if ACPI
help
Choose this option if you have a system that has "Intel Graphics
Media Accelerator" or "HD Graphics" integrated graphics,
diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig
index 40afc69a3778..40227fc4f284 100644
--- a/drivers/gpu/drm/nouveau/Kconfig
+++ b/drivers/gpu/drm/nouveau/Kconfig
@@ -1,6 +1,7 @@
config DRM_NOUVEAU
tristate "Nouveau (NVIDIA) cards"
depends on DRM && PCI
+ depends on (ACPI && ACPI_VIDEO) || ACPI=n
select FW_LOADER
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
@@ -10,18 +11,10 @@ config DRM_NOUVEAU
select FB_CFB_IMAGEBLIT
select FB
select FRAMEBUFFER_CONSOLE if !EXPERT
- select FB_BACKLIGHT if DRM_NOUVEAU_BACKLIGHT
- select ACPI_VIDEO if ACPI && X86 && BACKLIGHT_CLASS_DEVICE && INPUT
select X86_PLATFORM_DEVICES if ACPI && X86
select ACPI_WMI if ACPI && X86
select MXM_WMI if ACPI && X86
select POWER_SUPPLY
- # Similar to i915, we need to select ACPI_VIDEO and it's dependencies
- select BACKLIGHT_LCD_SUPPORT if ACPI && X86
- select BACKLIGHT_CLASS_DEVICE if ACPI && X86
- select INPUT if ACPI && X86
- select THERMAL if ACPI && X86
- select ACPI_VIDEO if ACPI && X86
help
Choose this option for open-source NVIDIA support.

@@ -64,6 +57,7 @@ config NOUVEAU_DEBUG_DEFAULT
config DRM_NOUVEAU_BACKLIGHT
bool "Support for backlight control"
depends on DRM_NOUVEAU
+ depends on BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display
diff --git a/drivers/gpu/drm/shmobile/Kconfig b/drivers/gpu/drm/shmobile/Kconfig
index a50fe0eeaa0d..71c00f3c0fbc 100644
--- a/drivers/gpu/drm/shmobile/Kconfig
+++ b/drivers/gpu/drm/shmobile/Kconfig
@@ -2,7 +2,7 @@ config DRM_SHMOBILE
tristate "DRM Support for SH Mobile"
depends on DRM && ARM
depends on ARCH_SHMOBILE || COMPILE_TEST
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
select DRM_KMS_CMA_HELPER
diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
index 7c3ef79fcb37..52e60feaae53 100644
--- a/drivers/gpu/drm/tilcdc/Kconfig
+++ b/drivers/gpu/drm/tilcdc/Kconfig
@@ -1,13 +1,12 @@
config DRM_TILCDC
tristate "DRM Support for TI LCDC Display Controller"
depends on DRM && OF && ARM
+ depends on BACKLIGHT_CLASS_DEVICE
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
select DRM_KMS_CMA_HELPER
select DRM_GEM_CMA_HELPER
select VIDEOMODE_HELPERS
- select BACKLIGHT_CLASS_DEVICE
- select BACKLIGHT_LCD_SUPPORT
help
Choose this option if you have an TI SoC with LCDC display
controller, for example AM33xx in beagle-bone, DA8xx, or
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3067d56b11a6..50cb2c3b567e 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -135,7 +135,7 @@ config PMAC_MEDIABAY
config PMAC_BACKLIGHT
bool "Backlight control for LCD screens"
depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
- select FB_BACKLIGHT
+ depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here to enable Macintosh specific extensions of the generic
backlight code. With this enabled, the brightness keys on older
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 4dcfb7116a04..63e99ce0e3f8 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -17,7 +17,7 @@ if X86_PLATFORM_DEVICES

config ACER_WMI
tristate "Acer WMI Laptop Extras"
- depends on ACPI
+ depends on ACPI && ACPI_VIDEO
select LEDS_CLASS
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
@@ -26,8 +26,6 @@ config ACER_WMI
depends on RFKILL || RFKILL = n
depends on ACPI_WMI
select INPUT_SPARSEKMAP
- # Acer WMI depends on ACPI_VIDEO when ACPI is enabled
- select ACPI_VIDEO if ACPI
---help---
This is a driver for newer Acer (and Wistron) laptops. It adds
wireless radio and bluetooth control, and on some laptops,
@@ -70,7 +68,7 @@ config ASUS_LAPTOP
depends on ACPI
select LEDS_CLASS
select NEW_LEDS
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on RFKILL || RFKILL = n
select INPUT_SPARSEKMAP
@@ -294,7 +292,7 @@ config COMPAL_LAPTOP
config SONY_LAPTOP
tristate "Sony Laptop Extras"
depends on ACPI
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on RFKILL
---help---
@@ -329,8 +327,7 @@ config THINKPAD_ACPI
depends on ACPI
depends on INPUT
depends on RFKILL || RFKILL = n
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
select NEW_LEDS
@@ -499,7 +496,7 @@ config EEEPC_LAPTOP
depends on INPUT
depends on RFKILL || RFKILL = n
depends on HOTPLUG_PCI
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
select HWMON
select LEDS_CLASS
select NEW_LEDS
@@ -675,8 +672,8 @@ config ACPI_CMPC
tristate "CMPC Laptop Extras"
depends on X86 && ACPI
depends on RFKILL || RFKILL=n
- select INPUT
- select BACKLIGHT_CLASS_DEVICE
+ depends on INPUT
+ depends on BACKLIGHT_CLASS_DEVICE
default n
help
Support for Intel Classmate PC ACPI devices, including some
@@ -805,7 +802,7 @@ config INTEL_OAKTRAIL
config SAMSUNG_Q10
tristate "Samsung Q10 Extras"
depends on ACPI
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
---help---
This driver provides support for backlight control on Samsung Q10
and related laptops, including Dell Latitude X200.
diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index d277f048789e..94acb4279704 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -3,7 +3,7 @@ config FB_OLPC_DCON
depends on OLPC && FB
depends on I2C
depends on (GPIO_CS5535 || GPIO_CS5535=n)
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
---help---
In order to support very low power operation, the XO laptop uses a
secondary Display CONtroller, or DCON. This secondary controller
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 76d77206e011..824630b09662 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -150,8 +150,7 @@ config USB_FTDI_ELAN

config USB_APPLEDISPLAY
tristate "Apple Cinema Display support"
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to control the backlight of Apple Cinema
Displays over USB. This driver provides a sysfs interface.
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index ccbe2ae22ac5..8cae7da2c723 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -185,13 +185,6 @@ config FB_MACMODES
depends on FB
default n

-config FB_BACKLIGHT
- bool
- depends on FB
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- default n
-
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
depends on FB
@@ -323,7 +316,7 @@ config FB_CLPS711X
tristate "CLPS711X LCD support"
depends on FB && (ARCH_CLPS711X || COMPILE_TEST)
select FB_CLPS711X_OLD if ARCH_CLPS711X && !ARCH_MULTIPLATFORM
- select BACKLIGHT_LCD_SUPPORT
+ depends on BACKLIGHT_LCD_SUPPORT
select FB_MODE_HELPERS
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
@@ -351,7 +344,7 @@ config FB_SA1100
config FB_IMX
tristate "Freescale i.MX1/21/25/27 LCD support"
depends on FB && ARCH_MXC
- select BACKLIGHT_LCD_SUPPORT
+ depends on BACKLIGHT_LCD_SUPPORT
select LCD_CLASS_DEVICE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -674,7 +667,7 @@ config FB_STI
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select STI_CONSOLE
- select VT
+ depends on VT
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
@@ -990,7 +983,7 @@ config FB_S1D13XXX
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
depends on FB && HAVE_FB_ATMEL
- select FB_BACKLIGHT
+ depends on BACKLIGHT_CLASS_DEVICE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1019,7 +1012,6 @@ config FB_ATMEL_STN
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
- select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1060,6 +1052,7 @@ config FB_NVIDIA_DEBUG
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
depends on FB_NVIDIA
+ depends on BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1067,7 +1060,6 @@ config FB_NVIDIA_BACKLIGHT
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
- select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1107,6 +1099,7 @@ config FB_RIVA_DEBUG
config FB_RIVA_BACKLIGHT
bool "Support for backlight control"
depends on FB_RIVA
+ depends on BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1345,7 +1338,6 @@ config FB_MATROX_MAVEN
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
- select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1370,6 +1362,7 @@ config FB_RADEON_I2C
config FB_RADEON_BACKLIGHT
bool "Support for backlight control"
depends on FB_RADEON
+ depends on BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1389,7 +1382,6 @@ config FB_ATY128
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
@@ -1402,6 +1394,7 @@ config FB_ATY128
config FB_ATY128_BACKLIGHT
bool "Support for backlight control"
depends on FB_ATY128
+ depends on BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1412,7 +1405,6 @@ config FB_ATY
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_BACKLIGHT if FB_ATY_BACKLIGHT
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
@@ -1452,6 +1444,7 @@ config FB_ATY_GX
config FB_ATY_BACKLIGHT
bool "Support for backlight control"
depends on FB_ATY
+ depends on BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
@@ -1997,12 +1990,12 @@ config FB_SH_MOBILE_LCDC
tristate "SuperH Mobile LCDC framebuffer support"
depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
depends on FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM
+ depends on BACKLIGHT_CLASS_DEVICE
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
select FB_DEFERRED_IO
- select FB_BACKLIGHT
select SH_MIPI_DSI if SH_LCD_MIPI_DSI
---help---
Frame buffer driver for the on-chip SH-Mobile LCD controller.
@@ -2356,10 +2349,10 @@ config FB_MSM
config FB_MX3
tristate "MX3 Framebuffer support"
depends on FB && MX3_IPU
+ depends on BACKLIGHT_CLASS_DEVICE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select BACKLIGHT_CLASS_DEVICE
default y
help
This is a framebuffer device for the i.MX31 LCD Controller. So
diff --git a/drivers/video/fbdev/core/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 53444ac19fe0..8f766f14038e 100644
--- a/drivers/video/fbdev/core/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
@@ -59,7 +59,7 @@ struct fb_info *framebuffer_alloc(size_t size, struct device *dev)

info->device = dev;

-#ifdef CONFIG_FB_BACKLIGHT
+#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
mutex_init(&info->bl_curve_mutex);
#endif

@@ -428,7 +428,7 @@ static ssize_t show_fbstate(struct device *device,
return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->state);
}

-#ifdef CONFIG_FB_BACKLIGHT
+#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
static ssize_t store_bl_curve(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -517,7 +517,7 @@ static struct device_attribute device_attrs[] = {
__ATTR(stride, S_IRUGO, show_stride, NULL),
__ATTR(rotate, S_IRUGO|S_IWUSR, show_rotate, store_rotate),
__ATTR(state, S_IRUGO|S_IWUSR, show_fbstate, store_fbstate),
-#ifdef CONFIG_FB_BACKLIGHT
+#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
__ATTR(bl_curve, S_IRUGO|S_IWUSR, show_bl_curve, store_bl_curve),
#endif
};
@@ -558,7 +558,7 @@ void fb_cleanup_device(struct fb_info *fb_info)
}
}

-#ifdef CONFIG_FB_BACKLIGHT
+#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
/* This function generates a linear backlight curve
*
* 0: off
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 09bb7a18d287..47e7742fdc9e 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -461,7 +461,7 @@ struct fb_info {
struct list_head modelist; /* mode list */
struct fb_videomode *mode; /* current mode */

-#ifdef CONFIG_FB_BACKLIGHT
+#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
/* assigned backlight device */
/* set before framebuffer registration,
remove after unregister */
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
index fb795c3b3c17..a7a4be063432 100644
--- a/include/uapi/linux/fb.h
+++ b/include/uapi/linux/fb.h
@@ -392,7 +392,7 @@ struct fb_cursor {
struct fb_image image; /* Cursor image */
};

-#ifdef CONFIG_FB_BACKLIGHT
+#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
/* Settings for the generic backlight code */
#define FB_BACKLIGHT_LEVELS 128
#define FB_BACKLIGHT_MAX 0xFF
--
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/