[PATCH 3.14 069/100] ARM: mvebu: Netgear RN102: Use Hardware BCH ECC
From: Greg Kroah-Hartman
Date: Tue Oct 28 2014 - 02:43:02 EST
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: "klightspeed@xxxxxxxxxxxxxxxx" <klightspeed@xxxxxxxxxxxxxxxx>
commit ace8578182dc347b043c0825b9873f62fdaa5b77 upstream.
The bootloader on the Netgear ReadyNAS RN102 uses Hardware BCH ECC
(strength = 4), while the pxa3xx NAND driver by default uses
Hamming ECC (strength = 1).
This patch changes the ECC mode on these machines to match that
of the bootloader and of the stock firmware. That way, it is
now possible to update the kernel from userland (e.g. using
standard tools from mtd-utils package); u-boot will happily
load and boot it.
Fixes: 92beaccd8b49 ("ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file")
Signed-off-by: Ben Peddell <klightspeed@xxxxxxxxxxxxxxxx>
Acked-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
Tested-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
Link: https://lkml.kernel.org/r/1410339341-3372-1-git-send-email-klightspeed@xxxxxxxxxxxxxxxx
Signed-off-by: Jason Cooper <jason@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-370-netgear-rn102.dts | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -144,6 +144,10 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
+ /* Use Hardware BCH ECC */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/