Re: [PATCH v3 09/15] net: dsa: Add support for switch EEPROM access

From: Guenter Roeck
Date: Thu Oct 30 2014 - 18:40:19 EST


On Thu, Oct 30, 2014 at 10:11:31PM +0100, Andrew Lunn wrote:
> > +static int dsa_slave_get_eeprom_len(struct net_device *dev)
> > +{
> > + struct dsa_slave_priv *p = netdev_priv(dev);
> > + struct dsa_switch *ds = p->parent;
> > +
> > + if (ds->pd->eeprom_len)
> > + return ds->pd->eeprom_len;
> > +
> > + if (ds->drv->get_eeprom_len)
> > + return ds->drv->get_eeprom_len(ds);
> > +
> > + return 0;
> > +}
> > +
>
> Hi Guenter
>
> I just started doing some testing with this patchset. A bit late since
> David just accepted it, but...
>
> root@dir665:~# ethtool -e lan4
> Cannot get EEPROM data: Invalid argument
> root@dir665:~# ethtool -e eth0
> Cannot get EEPROM data: Operation not supported
>
> There is no eeprom for the hardware i'm testing. Operation not
> supported seems like a better error code and Invalid argument, and is
> what other network drivers i tried returned.
>
Hi Andrew,

I think the problem is that the infrastructure code (net/core/ethtool.c)
does not accept an error from the get_eeprom_len function, but instead
assumes that reporting eeprom data is supported if a driver provides
the access functions. The get_eeprom_len function returns 0 in your case,
which in ethtool_get_any_eeprom() translates to -EINVAL because user space
either requests no data or more data than available. I wonder why user
space requests anything in the first place; I would have assumed that it
reads the driver information first and is told that the eeprom length is 0,
but I guess that is a different question.

I quickly browsed through a couple of other drivers supporting get_eprom_len,
and they all return 0 if there is no eeprom. Doesn't that mean that they all
end up reporting -EINVAL if an attempt is made to read the eeprom ?

The only solution that comes to my mind would be to have the infrastructure
code check the return value from get_eeprom_len and return -EOPNOTSUPP
if the reported eeprom length is 0. That would be an infrastructure change,
though. Does that sound reasonable, or do you have a better idea ?

In parallel, I'll have a look into the ethtool command to see why it
requests eeprom data even though the reported eeprom length is 0.

Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/