RE: [PATCH 1/1] mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver

From: Tan, Raymond
Date: Tue Nov 11 2014 - 07:57:50 EST

Next message: Timofey Titovets: "[PATCH V3 0/4] KSM: Mark new vma for deduplication"
Previous message: Andy Yan: "[PATCH v7 7/7] dt-bindings: add document for dw-hdmi"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Andy,

Thanks for your review. I've made the changes and will resend the patch v2.

Warm Regards,

ÂRaymond Tan
Software Engineer
Malaysia IT Flex Services
INET: 8-253-0075
Flex Website: http://flexservices.intel.com

> -----Original Message-----
> From: Andy Shevchenko [mailto:andriy.shevchenko@xxxxxxxxxxxxxxx]
> Sent: Monday, November 03, 2014 5:12 PM
> To: Tan, Raymond
> Cc: Lee Jones; Samuel Ortiz; linux-kernel@xxxxxxxxxxxxxxx; Chen, Alvin
> Subject: Re: [PATCH 1/1] mfd: intel_quark_i2c_gpio: Add Intel Quark X1000
> I2C-GPIO MFD Driver
>
> On Mon, 2014-11-03 at 15:39 +0800, Raymond Tan wrote:
> > In Quark X1000, there's a single PCI device that provides both an I2C
> > controller and a GPIO controller. This MFD driver will split the 2
> > devices for their respective drivers.
> >
> > This patch is based on Josef Ahmad's initial work for Quark enabling.
>
> Few comments below.
>
> After addressing take my
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>
> >
> > Signed-off-by: Weike Chen <alvin.chen@xxxxxxxxx>
> > Signed-off-by: Raymond Tan <raymond.tan@xxxxxxxxx>
> > ---
> > drivers/mfd/Kconfig | 11 ++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/intel_quark_i2c_gpio.c | 298
> > ++++++++++++++++++++++++++++++++++++
> > 3 files changed, 310 insertions(+)
> > create mode 100644 drivers/mfd/intel_quark_i2c_gpio.c
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > b7c74a7..d01d042 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -219,6 +219,17 @@ config HTC_I2CPLD
> > This device provides input and output GPIOs through an I2C
> > interface to one or more sub-chips.
> >
> > +config MFD_INTEL_QUARK_I2C_GPIO
> > + tristate "Intel Quark MFD I2C GPIO"
> > + depends on PCI && X86
> > + depends on COMMON_CLK
> > + select MFD_CORE
> > + help
> > + This MFD provides support for I2C and GPIO that exist only
> > + in a single PCI device. It splits the 2 IO devices to
> > + their respective IO driver.
> > + The GPIO exports a total amount of 8 interrupt-capable GPIOs.
> > +
> > config LPC_ICH
> > tristate "Intel ICH LPC"
> > depends on PCI
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > 8a28dc9..d42652d 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -133,6 +133,7 @@ obj-$(CONFIG_AB8500_CORE) += ab8500-
> core.o ab8500-sysctrl.o
> > obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
> > obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
> > obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o
> > +obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) +=
> intel_quark_i2c_gpio.o
> > obj-$(CONFIG_LPC_SCH) += lpc_sch.o
> > obj-$(CONFIG_LPC_ICH) += lpc_ich.o
> > obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o
> > diff --git a/drivers/mfd/intel_quark_i2c_gpio.c
> > b/drivers/mfd/intel_quark_i2c_gpio.c
> > new file mode 100644
> > index 0000000..e3cd6fb
> > --- /dev/null
> > +++ b/drivers/mfd/intel_quark_i2c_gpio.c
> > @@ -0,0 +1,298 @@
> > +/*
> > + * Intel Quark MFD PCI driver for I2C & GPIO
> > + *
> > + * Copyright(c) 2014 Intel Corporation.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > +WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY
> > +or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> > +License for
> > + * more details.
> > + *
> > + * Intel Quark PCI device for I2C and GPIO controller sharing the
> > +same
> > + * PCI function. This PCI driver will split the 2 devices into their
> > + * respective drivers.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/pci.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/clkdev.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/dmi.h>
> > +#include <linux/platform_data/gpio-dwapb.h>
> > +#include <linux/platform_data/i2c-designware.h>
> > +
> > +/* PCI BAR for register base address */
> > +#define MFD_I2C_BAR 0
> > +#define MFD_GPIO_BAR 1
> > +
> > +/* The base GPIO number under GPIOLIB framework */
> > +#define INTEL_QUARK_MFD_GPIO_BASE 8
> > +
> > +/* The default number of South-Cluster GPIO on Quark. */
> > +#define INTEL_QUARK_MFD_NGPIO 8
> > +
> > +/* The DesignWare GPIO ports on Quark. */
> > +#define INTEL_QUARK_GPIO_NPORTS 1
> > +
> > +#define INTEL_QUARK_IORES_MEM 0
> > +#define INTEL_QUARK_IORES_IRQ 1
> > +
> > +#define INTEL_QUARK_I2C_CONTROLLER_CLK "i2c_designware.0"
> > +
> > +/* The Quark I2C controller source clock */
> > +#define INTEL_QUARK_I2C_CLK_HZ 33000000
> > +
> > +#define INTEL_QUARK_I2C_NCLK 1
> > +
> > +struct clk *intel_quark_i2c_clk;
> > +struct clk_lookup *intel_quark_i2c_clk_lookups;
> > +
> > +struct i2c_mode_info {
> > + const char *name;
> > + unsigned int i2c_scl_freq;
> > +};
> > +
> > +static const struct i2c_mode_info platform_i2c_mode_info[] = {
> > + {
> > + .name = "Galileo",
> > + .i2c_scl_freq = 100000,
> > + },
> > + {
> > + .name = "GalileoGen2",
> > + .i2c_scl_freq = 400000,
> > + },
>
> You can decrease indentation level if you want to by using
>
> = {{
> }, {
> }};
>
> Though I don't know if Lee likes it :-)
>
> At least you may use }, { at one line I think.
>
> > +};
> > +
> > +static struct resource intel_quark_i2c_res[] = {
> > + [INTEL_QUARK_IORES_MEM] = {
> > + .flags = IORESOURCE_MEM,
> > + },
> > + [INTEL_QUARK_IORES_IRQ] = {
> > + .flags = IORESOURCE_IRQ,
> > + },
> > +};
> > +
> > +static struct resource intel_quark_gpio_res[] = {
> > + [INTEL_QUARK_IORES_MEM] = {
> > + .flags = IORESOURCE_MEM,
> > + },
> > +};
> > +
> > +static struct mfd_cell intel_quark_mfd_cells[] = {
> > + {
> > + .id = MFD_I2C_BAR,
> > + .name = "i2c_designware",
> > + .num_resources = ARRAY_SIZE(intel_quark_i2c_res),
> > + .resources = intel_quark_i2c_res,
> > + .ignore_resource_conflicts = true,
> > + },
> > + {
> > + .id = MFD_GPIO_BAR,
> > + .name = "gpio-dwapb",
> > + .num_resources = ARRAY_SIZE(intel_quark_gpio_res),
> > + .resources = intel_quark_gpio_res,
> > + .ignore_resource_conflicts = true,
> > + },
>
> Ditto.
>
> > +};
> > +
> > +static const struct pci_device_id intel_quark_mfd_ids[] = {
> > + { PCI_VDEVICE(INTEL, 0x0934), },
> > + { 0,}
> > +};
> > +MODULE_DEVICE_TABLE(pci, intel_quark_mfd_ids);
> > +
> > +static struct dwapb_platform_data *
> > +intel_quark_prepare_pdata(struct pci_dev *pdev) {
> > + struct dwapb_platform_data *pdata;
> > + struct device *dev = &pdev->dev;
> > +
> > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> > + if (!pdata)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + /* For intel quark x1000, it has only one port: portA */
> > + pdata->nports = INTEL_QUARK_GPIO_NPORTS;
> > + pdata->properties = devm_kcalloc(dev, pdata->nports,
> > + sizeof(*pdata->properties),
> > + GFP_KERNEL);
> > + if (!pdata->properties)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + /* Set the properties for portA */
> > + pdata->properties->node = NULL;
> > + pdata->properties->name = "intel-quark-x1000-gpio-portA";
> > + pdata->properties->idx = 0;
> > + pdata->properties->ngpio = INTEL_QUARK_MFD_NGPIO;
> > + pdata->properties->gpio_base = INTEL_QUARK_MFD_GPIO_BASE;
> > + pdata->properties->irq = pdev->irq;
> > + pdata->properties->irq_shared = true;
> > +
> > + return pdata;
> > +}
> > +
> > +static struct dw_i2c_platform_data *
> > +intel_quark_get_i2c_mode(struct pci_dev *pdev) {
> > + const char *board_name =
> dmi_get_system_info(DMI_BOARD_NAME);
> > + struct dw_i2c_platform_data *pdata;
> > + struct device *dev = &pdev->dev;
> > + unsigned int i;
> > +
> > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> > + if (!pdata)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + /* Fast mode by default */
> > + pdata->i2c_scl_freq = 400000;
> > +
> > + for (i = 0; i < ARRAY_SIZE(platform_i2c_mode_info); i++)
> > + if (!strcmp(board_name, platform_i2c_mode_info[i].name))
> > + pdata->i2c_scl_freq
> > + = platform_i2c_mode_info[i].i2c_scl_freq;
> > +
> > + return pdata;
> > +}
> > +
> > +static int intel_quark_register_i2c_clk(struct pci_dev *pdev) {
> > + intel_quark_i2c_clk = clk_register_fixed_rate(
> > + &pdev->dev, INTEL_QUARK_I2C_CONTROLLER_CLK, NULL,
> > + CLK_IS_ROOT, INTEL_QUARK_I2C_CLK_HZ);
> > +
> > + intel_quark_i2c_clk_lookups = devm_kcalloc(
> > + &pdev->dev, INTEL_QUARK_I2C_NCLK,
> > + sizeof(*intel_quark_i2c_clk_lookups), GFP_KERNEL);
> > +
> > + if (!intel_quark_i2c_clk_lookups)
>
> Potential leak here since you didn't call clk_unregister().
> Maybe you move the memory allocation upper?
>
> > + return -ENOMEM;
> > +
> > + intel_quark_i2c_clk_lookups[0].dev_id =
> > +INTEL_QUARK_I2C_CONTROLLER_CLK;
> > +
> > + return clk_register_clkdevs(intel_quark_i2c_clk,
> > + intel_quark_i2c_clk_lookups, INTEL_QUARK_I2C_NCLK); }
> > +
> > +static void intel_quark_unregister_i2c_clk(void)
> > +{
> > + if (!intel_quark_i2c_clk || !intel_quark_i2c_clk_lookups)
> > + return;
> > +
> > + clkdev_drop(intel_quark_i2c_clk_lookups);
> > + clk_unregister(intel_quark_i2c_clk);
> > +}
> > +
> > +static int intel_quark_i2c_setup(struct pci_dev *pdev, struct
> > +mfd_cell *cell) {
> > + struct dw_i2c_platform_data *pdata;
> > + struct resource *res = (struct resource *)cell->resources;
> > + int retval;
> > +
> > + res[INTEL_QUARK_IORES_MEM].start =
> > + pci_resource_start(pdev, MFD_I2C_BAR);
> > + res[INTEL_QUARK_IORES_MEM].end =
> > + pci_resource_end(pdev, MFD_I2C_BAR);
> > +
> > + res[INTEL_QUARK_IORES_IRQ].start = pdev->irq;
> > + res[INTEL_QUARK_IORES_IRQ].end = pdev->irq;
> > +
> > + retval = intel_quark_register_i2c_clk(pdev);
> > + if (retval) {
> > + dev_err(&pdev->dev, "Fixed clk register failed: %d\n",
> retval);
> > + return retval;
> > + }
> > +
> > + pdata = intel_quark_get_i2c_mode(pdev);
> > + if (IS_ERR(pdata))
> > + return PTR_ERR(pdata);
> > +
> > + cell->platform_data = pdata;
> > + cell->pdata_size = sizeof(*pdata);
> > +
> > + return 0;
> > +}
> > +
> > +static int intel_quark_gpio_setup(struct pci_dev *pdev, struct
> > +mfd_cell *cell) {
> > + struct dwapb_platform_data *pdata;
> > + struct resource *res = (struct resource *)cell->resources;
> > +
> > + res[INTEL_QUARK_IORES_MEM].start =
> > + pci_resource_start(pdev, MFD_GPIO_BAR);
> > + res[INTEL_QUARK_IORES_MEM].end =
> > + pci_resource_end(pdev, MFD_GPIO_BAR);
> > +
> > + pdata = intel_quark_prepare_pdata(pdev);
> > + if (IS_ERR(pdata))
> > + return PTR_ERR(pdata);
> > +
> > + cell->platform_data = pdata;
> > + cell->pdata_size = sizeof(*pdata);
> > +
> > + return 0;
> > +}
> > +
> > +struct intel_quark_mfd_dev {
> > + int (*setup)(struct pci_dev *pdev, struct mfd_cell *cell);
> > + struct mfd_cell *cell;
> > +};
> > +
> > +static struct intel_quark_mfd_dev intel_quark_mfd_devs[] = {
> > + {
> > + .cell = &intel_quark_mfd_cells[MFD_I2C_BAR],
> > + .setup = intel_quark_i2c_setup,
> > + },
> > + {
> > + .cell = &intel_quark_mfd_cells[MFD_GPIO_BAR],
> > + .setup = intel_quark_gpio_setup,
> > + },
> > + {
> > + /* terminator */
> > + },
> > +};
> > +
> > +static int intel_quark_mfd_probe(struct pci_dev *pdev,
> > + const struct pci_device_id *id)
> > +{
> > + struct intel_quark_mfd_dev *mfd_dev;
> > + int retval;
> > +
> > + retval = pcim_enable_device(pdev);
> > + if (retval)
> > + return retval;
> > +
> > + for (mfd_dev = intel_quark_mfd_devs; mfd_dev->cell; mfd_dev++)
> > + if (mfd_dev->setup) {
> > + retval = mfd_dev->setup(pdev, mfd_dev->cell);
> > + if (retval)
> > + return retval;
> > + }
> > +
> > + return mfd_add_devices(&pdev->dev, 0, intel_quark_mfd_cells,
> > + ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0, NULL); }
> > +
> > +static void intel_quark_mfd_remove(struct pci_dev *pdev) {
> > + intel_quark_unregister_i2c_clk();
> > + mfd_remove_devices(&pdev->dev);
> > +}
> > +
> > +static struct pci_driver intel_quark_mfd_driver = {
> > + .name = "intel_quark_mfd_i2c_gpio",
> > + .id_table = intel_quark_mfd_ids,
> > + .probe = intel_quark_mfd_probe,
> > + .remove = intel_quark_mfd_remove,
> > +};
> > +
> > +module_pci_driver(intel_quark_mfd_driver);
> > +
> > +MODULE_AUTHOR("Raymond Tan <raymond.tan@xxxxxxxxx>");
> > +MODULE_DESCRIPTION("Intel Quark MFD PCI driver for I2C & GPIO");
> > +MODULE_LICENSE("GPL v2");
>
>
> --
> Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Intel Finland Oy

N‹§²æ¸›yú²X¬¶ÇvØ–)Þ{.nÇ‰·¥Š{±‘êX§¶›¡Ü}©ž²ÆzÚj:+v‰¨¾«‘êZ+€Êzf£¢·hšˆ§~††Ûÿû®w¥¢¸?™¨è&¢)ßf”ùy§m…á«a¶Úÿ0¶ìå

Next message: Timofey Titovets: "[PATCH V3 0/4] KSM: Mark new vma for deduplication"
Previous message: Andy Yan: "[PATCH v7 7/7] dt-bindings: add document for dw-hdmi"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]