Re: [PATCH v4 2/7] iio: core: Introduce IIO_ACTIVITY channel

[Jonathan Cameron]

On 10/11/14 12:45, Daniel Baluta wrote:
> This channel will be used for exposing information about
> activity composite sensors. Activities supported so far:
> 	* running
> 	* jogging
> 	* walking
> 	* still
> 
> THRESHOLD event is used to signal a change in the activity
> state.
> 
> We associate a confidence interval for each activity expressed
> as a percentage from 0 to 100.
>   * 0, means the sensor IS NOT reporting that activity.
>   * 100, means the sensor IS reporting that activity.
> 
> Users of this interface have two possible means to gather
> information about the ongoing activities.
> 
> 1. Event based, via event file descriptor
>   * sensor may report an event when ENTERING an activity or LEAVING
>     an activity based on a threshold value.
>   * drivers will wake up applications waiting data on the event fd
> 
> 2. Polling, by reading the sysfs associated attribute files:
>   * /sys/bus/iio/devices/iio:device0/in_activity_running_input
> expressed as percentage confidence value from 0 to 100.
> 
> This will offer an interface for Android significant motion
> composite sensor defined here:
> http://source.android.com/devices/sensors/composite_sensors.html
> 
> Activities listed above are supported by Freescale's MMA9553 sensor:
> http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf
> 
> Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
> Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Very happy with this - mind you only time will tell if we have ended up
with a flexible enough interface - particularly as people get better at
distinguishing activities use accelerometry.
(come to think of it I wrote a paper on this once - it was rubbish and got
rejected, so I'd rather not remember it, but that's not the point - I
have some recollection of how hard it is to get terribly accurate!)

Anyhow, applied to the togreg branch of iio.git. testing... autobuilders
etc etc.
> ---
>  Documentation/ABI/testing/sysfs-bus-iio | 44 +++++++++++++++++++++++++++++++++
>  drivers/iio/industrialio-core.c         |  5 ++++
>  include/linux/iio/types.h               |  7 +++++-
>  3 files changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 117521d..7bf49ad 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -790,6 +790,40 @@ Description:
>  		met before an event is generated. If direction is not
>  		specified then this period applies to both directions.
>  
> +What:		/sys/.../events/in_activity_still_thresh_rising_en
> +What:		/sys/.../events/in_activity_still_thresh_falling_en
> +What:		/sys/.../events/in_activity_walking_thresh_rising_en
> +What:		/sys/.../events/in_activity_walking_thresh_falling_en
> +What:		/sys/.../events/in_activity_jogging_thresh_rising_en
> +What:		/sys/.../events/in_activity_jogging_thresh_falling_en
> +What:		/sys/.../events/in_activity_running_thresh_rising_en
> +What:		/sys/.../events/in_activity_running_thresh_falling_en
> +KernelVersion:	3.19
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		Enables or disables activitity events. Depending on direction
> +		an event is generated when sensor ENTERS or LEAVES a given state.
> +
> +What:		/sys/.../events/in_activity_still_thresh_rising_value
> +What:		/sys/.../events/in_activity_still_thresh_falling_value
> +What:		/sys/.../events/in_activity_walking_thresh_rising_value
> +What:		/sys/.../events/in_activity_walking_thresh_falling_value
> +What:		/sys/.../events/in_activity_jogging_thresh_rising_value
> +What:		/sys/.../events/in_activity_jogging_thresh_falling_value
> +What:		/sys/.../events/in_activity_running_thresh_rising_value
> +What:		/sys/.../events/in_activity_running_thresh_falling_value
> +KernelVersion:	3.19
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		Confidence value (in units as percentage) to be used
> +		for deciding when an event should be generated. E.g for
> +		running: If the confidence value reported by the sensor
> +		is greater than in_activity_running_thresh_rising_value
> +		then the sensor ENTERS running state. Conversely, if the
> +		confidence value reported by the sensor is lower than
> +		in_activity_running_thresh_falling_value then the sensor
> +		is LEAVING running state.
> +
>  What:		/sys/.../iio:deviceX/events/in_accel_mag_en
>  What:		/sys/.../iio:deviceX/events/in_accel_mag_rising_en
>  What:		/sys/.../iio:deviceX/events/in_accel_mag_falling_en
> @@ -956,6 +990,16 @@ Description:
>  		and the relevant _type attributes to establish the data storage
>  		format.
>  
> +What:		/sys/.../iio:deviceX/in_activity_still_input
> +What:		/sys/.../iio:deviceX/in_activity_walking_input
> +What:		/sys/.../iio:deviceX/in_activity_jogging_input
> +What:		/sys/.../iio:deviceX/in_activity_running_input
> +KernelVersion:	3.19
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		This attribute is used to read the confidence for an activity
> +		expressed in units as percentage.
> +
>  What:		/sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
>  KernelVersion:	2.6.38
>  Contact:	linux-iio@xxxxxxxxxxxxxxx
> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> index af3e76d..e453ef9 100644
> --- a/drivers/iio/industrialio-core.c
> +++ b/drivers/iio/industrialio-core.c
> @@ -70,6 +70,7 @@ static const char * const iio_chan_type_name_spec[] = {
>  	[IIO_CCT] = "cct",
>  	[IIO_PRESSURE] = "pressure",
>  	[IIO_HUMIDITYRELATIVE] = "humidityrelative",
> +	[IIO_ACTIVITY] = "activity",
>  };
>  
>  static const char * const iio_modifier_names[] = {
> @@ -91,6 +92,10 @@ static const char * const iio_modifier_names[] = {
>  	[IIO_MOD_NORTH_TRUE] = "from_north_true",
>  	[IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
>  	[IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
> +	[IIO_MOD_RUNNING] = "running",
> +	[IIO_MOD_JOGGING] = "jogging",
> +	[IIO_MOD_WALKING] = "walking",
> +	[IIO_MOD_STILL] = "still",
>  };
>  
>  /* relies on pairs of these shared then separate */
> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
> index 4a2af8a..b3a241d 100644
> --- a/include/linux/iio/types.h
> +++ b/include/linux/iio/types.h
> @@ -30,6 +30,7 @@ enum iio_chan_type {
>  	IIO_CCT,
>  	IIO_PRESSURE,
>  	IIO_HUMIDITYRELATIVE,
> +	IIO_ACTIVITY,
>  };
>  
>  enum iio_modifier {
> @@ -59,7 +60,11 @@ enum iio_modifier {
>  	IIO_MOD_NORTH_MAGN,
>  	IIO_MOD_NORTH_TRUE,
>  	IIO_MOD_NORTH_MAGN_TILT_COMP,
> -	IIO_MOD_NORTH_TRUE_TILT_COMP
> +	IIO_MOD_NORTH_TRUE_TILT_COMP,
> +	IIO_MOD_RUNNING,
> +	IIO_MOD_JOGGING,
> +	IIO_MOD_WALKING,
> +	IIO_MOD_STILL,
>  };
>  
>  enum iio_event_type {
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/