Re: [PATCH v2 1/5] i2c: i2c-davinci: switch to use platform_get_irq

From: Grygorii Strashko
Date: Wed Nov 26 2014 - 11:29:03 EST


On 11/26/2014 05:54 PM, Uwe Kleine-König wrote:
Hello Grygorii,

On Wed, Nov 26, 2014 at 03:59:49PM +0200, Grygorii Strashko wrote:
Switch Davinci I2C driver to use platform_get_irq(), because
it is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ, ..)
for requesting IRQ resources any more, as they can be not ready yet
in case of DT-boot.

CC: Sekhar Nori <nsekhar@xxxxxx>
CC: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
CC: Santosh Shilimkar <ssantosh@xxxxxxxxxx>
CC: Murali Karicheri <m-karicheri2@xxxxxx>
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
drivers/i2c/busses/i2c-davinci.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 4d96147..7f54903 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -640,13 +640,17 @@ static int davinci_i2c_probe(struct platform_device *pdev)
{
struct davinci_i2c_dev *dev;
struct i2c_adapter *adap;
- struct resource *mem, *irq;
- int r;
-
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
- dev_err(&pdev->dev, "no irq resource?\n");
- return -ENODEV;
+ struct resource *mem;
+ int r, irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ if (irq == -EPROBE_DEFER)
+ return irq;
+ if (!irq)
+ irq = -ENXIO;
+ dev_err(&pdev->dev, "can't get irq resource ret=%d\n", irq);
+ return irq;
The simpler and I think also more usual logic is:

if (!irq)
irq = -ENXIO;
if (irq != -EPROBE_DEFER)
dev_err(...);
return irq;

Other than that the patch looks fine.

Ok. will change and add your ack.

regards,
-grygorii

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/