Re: [PATCHv5 2/5] arm: socfpga: Enable OCRAM ECC on startup.

From: Mark Rutland
Date: Tue Dec 02 2014 - 10:12:09 EST


On Wed, Nov 12, 2014 at 12:14:20AM +0000, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
>
> This patch enables the ECC for On-Chip RAM on machine
> startup. The ECC has to be enabled before data is
> is stored in memory otherwise the ECC will fail on
> reads.
>
> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> ---
> v2: Split OCRAM ECC portion separately. Addition of iounmap()
> and reorganization of gen_pool_free. Remove defconfig from patch.
>
> v3/4: No change
>
> v5: Remove ocram.h, use io.h instead of clk-provider.h
> Check prop in correct place. Add ECC EN defines.
> ---
> arch/arm/mach-socfpga/Makefile | 1 +
> arch/arm/mach-socfpga/core.h | 1 +
> arch/arm/mach-socfpga/ocram.c | 90 +++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-socfpga/socfpga.c | 9 ++++
> 4 files changed, 101 insertions(+)
> create mode 100644 arch/arm/mach-socfpga/ocram.c
>
> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
> index 142609e..1552ca5 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -5,3 +5,4 @@
> obj-y := socfpga.o
> obj-$(CONFIG_SMP) += headsmp.o platsmp.o
> obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o
> +obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o
> diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
> index 385baba..f3eee32 100644
> --- a/arch/arm/mach-socfpga/core.h
> +++ b/arch/arm/mach-socfpga/core.h
> @@ -45,5 +45,6 @@ extern unsigned long cpu1start_addr;
> #define SOCFPGA_SCU_VIRT_BASE 0xfffec000
>
> void socfpga_init_l2_ecc(void);
> +void socfpga_init_ocram_ecc(void);
>
> #endif
> diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
> new file mode 100644
> index 0000000..a83b34f
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/ocram.c
> @@ -0,0 +1,90 @@
> +/*
> + * Copyright Altera Corporation (C) 2014. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/io.h>
> +#include <linux/genalloc.h>
> +#include <linux/of_platform.h>
> +
> +#define ALTR_OCRAM_CLEAR_ECC 0x00000018
> +#define ALTR_OCRAM_ECC_EN 0x00000019
> +
> +void socfpga_init_ocram_ecc(void)
> +{
> + struct device_node *np;
> + const __be32 *prop;

Please don't use accessors which return raw __be32s in drivers,
typically it's the wrong thing to do and leaves horrible bugs and/or
quirks that are painful to fix up.

> + u32 ocr_edac_addr, iram_addr, len;
> + void __iomem *mapped_ocr_edac_addr;
> + size_t size;
> + struct gen_pool *gp;
> +
> + np = of_find_compatible_node(NULL, NULL, "altr,ocram-edac");
> + if (!np) {
> + pr_err("SOCFPGA: Unable to find altr,ocram-edac in dtb\n");
> + return;
> + }
> +
> + prop = of_get_property(np, "reg", &size);
> + if (!prop || size < sizeof(*prop)) {
> + pr_err("SOCFPGA: Unable to find OCRAM ECC mapping in dtb\n");
> + return;
> + }
> + ocr_edac_addr = be32_to_cpup(prop++);
> + len = be32_to_cpup(prop);

Use of_iomap(np, 0). You don't seem to pass the address around, so that
should be sufficient.

> +
> + gp = of_get_named_gen_pool(np, "iram", 0);
> + if (!gp) {
> + pr_err("SOCFPGA: OCRAM cannot find gen pool\n");
> + return;
> + }
> +
> + np = of_find_compatible_node(NULL, NULL, "mmio-sram");
> + if (!np) {
> + pr_err("SOCFPGA: Unable to find mmio-sram in dtb\n");
> + return;
> + }
> +
> + /* Determine the OCRAM address and size */
> + prop = of_get_property(np, "reg", &size);
> + if (!prop || size < sizeof(*prop)) {
> + pr_err("SOCFPGA: Unable to find OCRAM mapping in dtb\n");
> + return;
> + }
> + iram_addr = be32_to_cpup(prop++);
> + len = be32_to_cpup(prop);

This address is overwritten below. What's going on?

> +
> + iram_addr = gen_pool_alloc(gp, len);
> + if (iram_addr == 0) {
> + pr_err("SOCFPGA: cannot alloc from gen pool\n");
> + return;
> + }
> +
> + memset((void *)iram_addr, 0, len);

How is the iram mapped? Is memset to it safe (e.g. it unaligned accesses
are made)?

> +
> + gen_pool_free(gp, iram_addr, len);
> +
> + mapped_ocr_edac_addr = ioremap(ocr_edac_addr, 4);
> + if (!mapped_ocr_edac_addr) {
> + pr_err("SOCFPGA: Unable to map OCRAM ecc regs.\n");
> + return;
> + }
> +
> + /* Clear any pending OCRAM ECC interrupts, then enable ECC */
> + writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr);
> + writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr);
> +
> + iounmap(mapped_ocr_edac_addr);
> +
> + pr_debug("SOCFPGA: Success Initializing OCRAM\n");
> +}
> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
> index 0954011..065d80d 100644
> --- a/arch/arm/mach-socfpga/socfpga.c
> +++ b/arch/arm/mach-socfpga/socfpga.c
> @@ -100,6 +100,14 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
> writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
> }
>
> +static void __init socfpga_cyclone5_init(void)
> +{
> + of_platform_populate(NULL, of_default_bus_match_table,
> + NULL, NULL);
> + if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
> + socfpga_init_ocram_ecc();

If it's safe to do this after probing everything else, why can't this be
a normal device probe?

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/