[PATCH v2 3/4] ARM: sti: Provide DT nodes for SSC[0..4]

From: Lee Jones
Date: Tue Dec 02 2014 - 10:41:37 EST


The Synchronous Serial Controller is used to provide SPI.

Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
arch/arm/boot/dts/stih407.dtsi | 54 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 50637f5..90bc090 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -275,5 +275,59 @@

status = "disabled";
};
+
+ spi@9840000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9840000 0x110>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi@9841000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9842000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9843000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9844000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
};
};
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/