Re: [PATCH v5 1/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY

From: Kishon Vijay Abraham I
Date: Thu Dec 11 2014 - 03:39:19 EST


Hi,

On Thursday 11 December 2014 01:14 PM, Yunzhi Li wrote:
> Hi Kishon:
>
> On 2014/12/11 14:02, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Wednesday 10 December 2014 04:16 PM, Yunzhi Li wrote:
>>> This patch to add a generic PHY driver for ROCKCHIP usb PHYs,
>>> currently this driver can support RK3288. The RK3288 SoC have
>>> three independent USB PHY IPs which are all configured through a
>>> set of registers located in the GRF (general register files)
>>> module.
>>>
>>> Signed-off-by: Yunzhi Li <lyz@xxxxxxxxxxxxxx>
>>>
>>> +
>>> +#define ROCKCHIP_RK3288_UOC(n) (0x320 + n * 0x14)
>>> +
>>> +/*
>>> + * The higher 16-bit of this register is used for write protection
>>> + * only if BIT(13 + 16) set to 1 the BIT(13) can be written.
>>> + */
>>> +#define SIDDQ_MSK BIT(13 + 16)
>> I think here the "MSK" is misleading. it should be something that refers write
>> protection?
> So, #define SIDDQ_WRITE_ENA BIT(29) , could be ok ?

yeah. should be fine.
>>> +#define SIDDQ_ON BIT(13)
>>> +#define SIDDQ_OFF (0 << 13)
>>> +
>>> +struct rockchip_usb_phy {
>>> + struct regmap *reg_base;
>>> + unsigned int reg_offset;
>>> + struct clk *clk;
>>> + struct phy *phy;
>>> + unsigned index;
>>> +};
>>> +
>>> +struct rockchip_usb_phy_priv {
>>> + struct rockchip_usb_phy *phys;
>>> + unsigned nphys;
>>> +};
>>> +
>>> +static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
>>> + bool siddq)
>>> +{
>>> + return regmap_write(phy->reg_base, phy->reg_offset,
>>> + SIDDQ_MSK | (siddq ? SIDDQ_ON : SIDDQ_OFF));
>> Shouldn't we actually reset the bit for power off?
> Sorry, which bit you refer to here and why should it be reset? could you give
> more infomation.

Never mind. Initially was thinking it might affect bits other than siddq but
anyway you have write lock. So should be fine.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/