[PATCH v3 0/7] Pinctrl support for Zynq

From: Soren Brinkmann
Date: Fri Dec 12 2014 - 11:35:47 EST


Hi,

I made those few adjustments that came up in the v2 review. Other than
those, these are the same patches as before.
The series is based on pinctrl-v3.19-1, the current pinctrl/devel
branch.
A branch with these changes is available at
https://github.com/sorenb-xlnx/linux-xlnx/commits/pinctrl

Thanks,
SÃren

Soren Brinkmann (7):
pinctrl: pinconf-generic: Infer map type from DT property
pinctrl: pinconf-generic: Allow driver to specify DT params
pinctrl: zynq: Document DT binding
pinctrl: Add driver for Zynq
ARM: zynq: Enable pinctrl
ARM: zynq: DT: Add pinctrl information
pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

.../bindings/pinctrl/xlnx,zynq-pinctrl.txt | 104 ++
arch/arm/boot/dts/zynq-7000.dtsi | 8 +-
arch/arm/boot/dts/zynq-zc702.dts | 181 +++
arch/arm/boot/dts/zynq-zc706.dts | 152 +++
arch/arm/mach-zynq/Kconfig | 2 +
drivers/pinctrl/Kconfig | 8 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/nomadik/pinctrl-abx500.c | 2 +-
drivers/pinctrl/pinconf-generic.c | 199 ++--
drivers/pinctrl/pinconf.c | 4 +-
drivers/pinctrl/pinconf.h | 22 +-
drivers/pinctrl/pinctrl-rockchip.c | 2 +-
drivers/pinctrl/pinctrl-tz1090-pdc.c | 2 +-
drivers/pinctrl/pinctrl-tz1090.c | 2 +-
drivers/pinctrl/pinctrl-zynq.c | 1176 ++++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 125 +--
drivers/pinctrl/sh-pfc/pinctrl.c | 2 +-
include/linux/pinctrl/pinconf-generic.h | 29 +
include/linux/pinctrl/pinctrl.h | 9 +
19 files changed, 1808 insertions(+), 222 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
create mode 100644 drivers/pinctrl/pinctrl-zynq.c

--
2.2.0.1.g9ee0458

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/