[PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device

[Lukasz Majewski]

Several new properties to allow PWM fan working as a cooling device have been
combined into this single commit.

Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
---
Changes for v2:
- Rename cooling-pwm-values to cooling-levels
- Remove default-pulse-width property and stick to default hwmon policy
---
 .../devicetree/bindings/hwmon/pwm-fan.txt          | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 610757c..001446a 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -3,10 +3,33 @@ Bindings for a fan connected to the PWM lines
 Required properties:
 - compatible	: "pwm-fan"
 - pwms		: the PWM that is used to control the PWM fan
+- cooling-levels      : PWM duty cycle values in a range from 0 to 255
+			which correspond to thermal cooling states
+
+Thorough description of the following bindings:
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		thermal-zone {
+			cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     trip = <&cpu_alert1>;
+				     cooling-device = <&fan0 0 1>;
+				};
+			};
+		};
+
+for PWM FAN used as cooling device can be found at:
+./Documentation/devicetree/bindings/thermal/thermal.txt
 
 Example:
 	pwm-fan {
 		compatible = "pwm-fan";
 		status = "okay";
 		pwms = <&pwm 0 10000 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 102 170 255>;
 	};
-- 
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/