[PATCH v4 0/1] add support for Seagate BlackArmor NAS220

From: Evgeni Dobrev
Date: Sun Dec 28 2014 - 05:46:37 EST

v4: rename basename to blackarmor-nas220
use "Seagate Blackarmor NAS220" as model name
use node references instead of repeating the bus structure
separate nodes with blank lines
adt7476's node name reflects device function (i.e. thermal)
reduce button labels to "Reset" and "Power"
use GPIO_ACTIVE_LOW for regulator's gpio property

v3: documented UART pinout in dts

v2: indent with tabs only
removed NAND layout

Evgeni Dobrev (1):
add support for Seagate BlackArmor NAS220

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts | 172 ++++++++++++++++++++++
2 files changed, 173 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/