[PATCH 10/12] pm: at91: remove the at91_xxx_standby() function definitions in the pm.h

From: Wenyou Yang
Date: Tue Jan 20 2015 - 03:27:16 EST


Because the the suspend to standby mode uses the sram function,
these functions will not used, remove the redundant code.

Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>
Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-at91/pm.h | 110 -----------------------------------------------
1 file changed, 110 deletions(-)

diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index fbfea42..46e18bb 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
#define __ARCH_ARM_MACH_AT91_PM

#include <asm/proc-fns.h>
-
#include <mach/at91_ramc.h>

#define AT91_PM_MEMCTRL_MASK 0x0f
@@ -21,113 +20,4 @@

#define AT91_PM_SLOW_CLOCK 0x01

-/*
- * On all at91 except rm9200 and x40 have the System Controller starts
- * at address 0xffffc000 and has a size of 16KiB.
- *
- * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
- * at 0xfffff000
- *
- * Removes the individual definitions of AT91_BASE_SYS and
- * replaces them with a common version at base 0xfffffc000 and size 16KiB
- * and map the same memory space
- */
-#define AT91_BASE_SYS 0xffffc000
-
-#ifdef CONFIG_PM
-extern void at91_pm_set_standby(void (*at91_standby)(void));
-#else
-static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
-#endif
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-static inline void at91rm9200_standby(void)
-{
- u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
- asm volatile(
- "b 1f\n\t"
- ".align 5\n\t"
- "1: mcr p15, 0, %0, c7, c10, 4\n\t"
- " str %0, [%1, %2]\n\t"
- " str %3, [%1, %4]\n\t"
- " mcr p15, 0, %0, c7, c0, 4\n\t"
- " str %5, [%1, %2]"
- :
- : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
- "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
- "r" (lpr));
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91_ddr_standby(void)
-{
- /* Those two values allow us to delay self-refresh activation
- * to the maximum. */
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
- lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
- lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
- lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
- lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9_sdram_standby(void)
-{
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
- lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
- lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
- lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
- lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
#endif
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/