[PATCH 6/6] Documentation: Add device tree bindings document for max77843

From: Jaewon Kim
Date: Fri Jan 23 2015 - 00:03:22 EST


Add document describing device tree bindings for max77843 MFD.
Drivers: MFD core, regulator, extcon, charger and fuelgauge.

Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/max77843.txt | 87 ++++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max77843.txt

diff --git a/Documentation/devicetree/bindings/mfd/max77843.txt b/Documentation/devicetree/bindings/mfd/max77843.txt
new file mode 100644
index 0000000..6895604
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77843.txt
@@ -0,0 +1,87 @@
+Maxim MAX77843 multi-function device
+
+MAX77843 is a Multi-Function Device with the following submodules:
+- PMIC : 2 SAFEOUT LDOs for USB device
+- CHARGER : Li+ battery charger with Fuel Gauge
+- MUIC : Micro USB Interface Circuit
+- HAPTIC : motor control driver for haptics
+- LED : 4 channel RGBW LED
+
+It is interfaced to host controller using I2C.
+
+Required properties:
+- compatible : Must be "maxim,max77843".
+- reg : I2C slave address of PMIC block.
+- interrupts : I2C line for main SoCs.
+- interrupt-parent : The parent of interrupt controller.
+
+Optional properties:
+- regulators : The regulators of max77843 have to be instantiated under subnode
+ named "regulators" using the following format.
+
+ [*]refer : Documentation/devicetree/bindings/regulator/regulator.txt
+
+ regulators {
+ SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+ }
+
+ List of valid regulator names:
+ - SAFEOUT1, SAFEOUT2, CHARGER.
+
+- max77843-muic : This properties used by extcon consumers.
+ Required properties:
+ - compatible : Must be "maxim,max77842-muic".
+
+- max77843-charger : There battery charger of MAX77843 have to be instantiated
+ under sub-node named "max77843-charger" using the following format.
+ Required properties:
+ - compatible : Must be "maxim,max77842-charger".
+ - maxim,fast-charge-uamp : Fast charge current levels are
+ 100 mA to 3150 mA programmed by I2C per 100 mA.
+ - maxim,top-off-uamp : Top off current threshold levels are
+ 125 mA to 650 mA programmed by I2C per 75 mA.
+ - maxim,input-uamp-limit : Input current limit levels are
+ 100 mA to 3533 mA programmed by I2C per 33 mA.
+- max77843-fuelgauge : There fuelgauge of MAX77843 have to be instantiated
+ under sub-node named "max77843-fuelgauge" using the following format.
+ Required properties:
+ - compatible : Must be "maxim,max77842-fuelgauge".
+
+Example:
+ max77843@66 {
+ compatible = "samsung,max77843";
+ reg = <0x66>;
+ interrupt-parent = <&gpa1>;
+ interrupts = <5 2>;
+
+ regulators {
+ SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+ SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+ };
+
+ max77843-muic {
+ compatible = "maxim,max77843-muic";
+ };
+
+ max77843-charger {
+ compatible = "maxim,max77843-charger";
+ maxim,fast-charge-uamp = <450000>;
+ maxim,top-off-uamp = <125000>;
+ maxim,input-uamp-limit = <500000>;
+ };
+
+ max77843-fuelgauge {
+ compatible = "maxim,max77843-fuelgauge";
+ };
+
+ };
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/