Re: [PATCH 1/6] mfd: max77843: Add max77843 MFD driver core driver

From: Jaewon Kim
Date: Fri Jan 23 2015 - 03:43:31 EST


HI Chanwoo,

2015ë 01ì 23ì 15:49ì Chanwoo Choi ì(ê) ì ê:
Hi Jaewon,

On 01/23/2015 02:02 PM, Jaewon Kim wrote:
This patch adds MAX77843 core/irq driver to support PMIC,
MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
LED and Haptic device.

Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
---
drivers/mfd/Kconfig | 14 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/max77843.c | 241 ++++++++++++++++++++
include/linux/mfd/max77843-private.h | 410 ++++++++++++++++++++++++++++++++++
4 files changed, 666 insertions(+)
create mode 100644 drivers/mfd/max77843.c
create mode 100644 include/linux/mfd/max77843-private.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2e6b731..0c67c79 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -442,6 +442,20 @@ config MFD_MAX77693
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX77843
+ bool "Maxim Semiconductor MAX77843 PMIC Support"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Say yes here to add support for Maxim Semiconductor MAX77843.
+ This is companion Power Management IC with LEDs, Haptic, Charger,
+ Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MAX8907
tristate "Maxim Semiconductor MAX8907 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 53467e2..fe4f75c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o
+obj-$(CONFIG_MFD_MAX77843) += max77843.o
obj-$(CONFIG_MFD_MAX8907) += max8907.o
max8925-objs := max8925-core.o max8925-i2c.o
obj-$(CONFIG_MFD_MAX8925) += max8925.o
diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
new file mode 100644
index 0000000..d7f8b76
--- /dev/null
+++ b/drivers/mfd/max77843.c
@@ -0,0 +1,241 @@
+/*
+ * max77843.c - MFD core driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2014 Samsung Electrnoics
+ * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+static const struct mfd_cell max77843_devs[] = {
+ {
+ .name = "max77843-muic",
+ .of_compatible = "maxim,max77843-muic",
+ }, {
+ .name = "max77843-regulator",
+ .of_compatible = "maxim,max77843-regulator",
+ }, {
+ .name = "max77843-charger",
+ .of_compatible = "maxim,max77843-charger"
+ }, {
+ .name = "max77843-fuelgauge",
+ .of_compatible = "maxim,max77843-fuelgauge",
+ },
+};
+
+static const struct regmap_config max77843_charger_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77843_CHG_REG_END,
+};
+
+static const struct regmap_config max77843_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77843_SYS_REG_END,
+};
+
+static const struct regmap_irq max77843_irqs[] = {
+ /* TOPSYS interrupts */
+ { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
+ { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
+ { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
+ { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
+};
+
+static const struct regmap_irq_chip max77843_irq_chip = {
+ .name = "max77843",
+ .status_base = MAX77843_SYS_REG_SYSINTSRC,
+ .mask_base = MAX77843_SYS_REG_SYSINTMASK,
+ .mask_invert = false,
+ .num_regs = 1,
+ .irqs = max77843_irqs,
+ .num_irqs = ARRAY_SIZE(max77843_irqs),
+};
+
+static int max77843_chg_init(struct max77843 *max77843)
+{
+ int ret;
+
+ max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
+ if (!max77843->i2c_chg) {
+ dev_err(&max77843->i2c->dev,
+ "Cannot allocate I2C device for Charger\n");
+ return PTR_ERR(max77843->i2c_chg);
+ }
+ i2c_set_clientdata(max77843->i2c_chg, max77843);
+
+ max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
+ &max77843_charger_regmap_config);
+ if (IS_ERR(max77843->regmap_chg)) {
+ ret = PTR_ERR(max77843->regmap_chg);
+ goto err_chg_i2c;
+ }
+
+ return 0;
+
+err_chg_i2c:
+ i2c_unregister_device(max77843->i2c_chg);
+
+ return ret;
+}
+
+static int max77843_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct max77843 *max77843;
+ int ret;
+ unsigned int reg_data;
+
+ max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
+ if (!max77843)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, max77843);
+ max77843->dev = &i2c->dev;
+ max77843->i2c = i2c;
+ max77843->irq = i2c->irq;
+
+ max77843->regmap = devm_regmap_init_i2c(i2c,
+ &max77843_regmap_config);
+ if (IS_ERR(max77843->regmap)) {
+ dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
+ return PTR_ERR(max77843->regmap);
+ }
+
+ ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+ 0, &max77843_irq_chip, &max77843->irq_data);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
+ return ret;
+ }
+
+ ret = regmap_read(max77843->regmap,
+ MAX77843_SYS_REG_PMICID, &reg_data);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read PMIC ID\n");
+ goto err_pmic_id;
+ }
+ dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
+
+ ret = max77843_chg_init(max77843);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to init Charger\n");
+ goto err_pmic_id;
+ }
+
+ ret = regmap_update_bits(max77843->regmap,
+ MAX77843_SYS_REG_INTSRCMASK,
+ MAX77843_INTSRC_MASK_MASK,
+ (unsigned int)~MAX77843_INTSRC_MASK_MASK);
Do you must need the casting with (unsigned int)?
I think you better use the correct value which
includes the unmasking data of some interrupts
instead of (unsigned int)~MAX77843_INTSRC_MASK_MASK.

Okay, I will use with correct value.



+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to unmask interrupt sourece\n");
+ goto err_pmic_id;
+ }
+
+ ret = mfd_add_devices(max77843->dev, -1, max77843_devs,
+ ARRAY_SIZE(max77843_devs), NULL, 0, NULL);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to add mfd device\n");
+ goto err_pmic_id;
+ }
+
+ device_init_wakeup(max77843->dev, 1);
+
+ return 0;
+
+err_pmic_id:
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+
+ return ret;
+}
+
+static int max77843_remove(struct i2c_client *i2c)
+{
+ struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(max77843->dev);
+
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+
+ i2c_unregister_device(max77843->i2c);
+
+ return 0;
+}
+
+static const struct of_device_id max77843_dt_match[] = {
+ { .compatible = "maxim,max77843", },
+ { /* sentinel */ },
+};
+
+static const struct i2c_device_id max77843_id[] = {
+ { "max77843", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i2c, max77843_id);
+
+static int __maybe_unused max77843_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(max77843->irq);
+ disable_irq(max77843->irq);
+
+ return 0;
+}
+
+static int __maybe_unused max77843_resume(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(max77843->irq);
+ enable_irq(max77843->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume);
+
+static struct i2c_driver max77843_i2c_driver = {
+ .driver = {
+ .name = "max77843",
+ .pm = &max77843_pm,
+ .of_match_table = max77843_dt_match,
+ },
+ .probe = max77843_probe,
+ .remove = max77843_remove,
+ .id_table = max77843_id,
+};
+static int __init max77843_i2c_init(void)
+{
+ return i2c_add_driver(&max77843_i2c_driver);
+}
+subsys_initcall(max77843_i2c_init);
+
+static void __exit max77843_i2c_exit(void)
+{
+ i2c_del_driver(&max77843_i2c_driver);
+}
+module_exit(max77843_i2c_exit);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Maxim MAX77843 multi-function core driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
new file mode 100644
index 0000000..560ed73
--- /dev/null
+++ b/include/linux/mfd/max77843-private.h
@@ -0,0 +1,410 @@
+/*
+ * max77843-private.h - Common API for the Maxim MAX77843 internal sub chip
+ *
+ * Copyright (C) 2014 Samsung Electrnoics
+ * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MAX77843_PRIVATE_H_
+#define __MAX77843_PRIVATE_H_
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#define I2C_ADDR_TOPSYS (0xCC >> 1)
+#define I2C_ADDR_CHG (0xD2 >> 1)
+#define I2C_ADDR_FG (0x6C >> 1)
+#define I2C_ADDR_MUIC (0x4A >> 1)
+
+/* Topsys, Haptic and LED registers */
+enum max77843_sys_reg {
+ MAX77843_SYS_REG_PMICID = 0x00,
+ MAX77843_SYS_REG_PMICREV = 0x01,
+ MAX77843_SYS_REG_MAINCTRL1 = 0x02,
+ MAX77843_SYS_REG_INTSRC = 0x22,
+ MAX77843_SYS_REG_INTSRCMASK = 0x23,
+ MAX77843_SYS_REG_SYSINTSRC = 0x24,
+ MAX77843_SYS_REG_SYSINTMASK = 0x26,
+ MAX77843_SYS_REG_TOPSYS_STAT = 0x28,
+ MAX77843_SYS_REG_SAFEOUTCTRL = 0xC6,
+
+ MAX77843_SYS_REG_END,
+};
+
+enum max77843_led_reg {
+ MAX77843_LED_REG_LEDEN = 0x30,
+ MAX77843_LED_REG_LED0BRT = 0x31,
+ MAX77843_LED_REG_LED1BRT = 0x32,
+ MAX77843_LED_REG_LED2BRT = 0x33,
+ MAX77843_LED_REG_LED3BRT = 0x34,
+ MAX77843_LED_REG_LEDBLNK = 0x38,
+ MAX77843_LED_REG_LEDRAMP = 0x36,
+
+ MAX77843_LED_REG_END,
+};
+
+/* Charger registers */
+enum max77843_charger_reg {
+ MAX77843_CHG_REG_CHG_INT = 0xB0,
+ MAX77843_CHG_REG_CHG_INT_MASK = 0xB1,
+ MAX77843_CHG_REG_CHG_INT_OK = 0xB2,
+ MAX77843_CHG_REG_CHG_DTLS_00 = 0xB3,
+ MAX77843_CHG_REG_CHG_DTLS_01 = 0xB4,
+ MAX77843_CHG_REG_CHG_DTLS_02 = 0xB5,
+ MAX77843_CHG_REG_CHG_CNFG_00 = 0xB7,
+ MAX77843_CHG_REG_CHG_CNFG_01 = 0xB8,
+ MAX77843_CHG_REG_CHG_CNFG_02 = 0xB9,
+ MAX77843_CHG_REG_CHG_CNFG_03 = 0xBA,
+ MAX77843_CHG_REG_CHG_CNFG_04 = 0xBB,
+ MAX77843_CHG_REG_CHG_CNFG_06 = 0xBD,
+ MAX77843_CHG_REG_CHG_CNFG_07 = 0xBE,
+ MAX77843_CHG_REG_CHG_CNFG_09 = 0xC0,
+ MAX77843_CHG_REG_CHG_CNFG_10 = 0xC1,
+ MAX77843_CHG_REG_CHG_CNFG_11 = 0xC2,
+ MAX77843_CHG_REG_CHG_CNFG_12 = 0xC3,
+
+ MAX77843_CHG_REG_END,
+};
+
+/* Fuel gauge registers */
+enum max77843_fuelgauge {
+ MAX77843_FG_REG_STATUS = 0x00,
+ MAX77843_FG_REG_VALRT_TH = 0x01,
+ MAX77843_FG_REG_TALRT_TH = 0x02,
+ MAX77843_FG_REG_SALRT_TH = 0x03,
+ MAX77843_FG_RATE_AT_RATE = 0x04,
+ MAX77843_FG_REG_REMCAP_REP = 0x05,
+ MAX77843_FG_REG_SOCREP = 0x06,
+ MAX77843_FG_REG_AGE = 0x07,
+ MAX77843_FG_REG_TEMP = 0x08,
+ MAX77843_FG_REG_VCELL = 0x09,
+ MAX77843_FG_REG_CURRENT = 0x0A,
+ MAX77843_FG_REG_AVG_CURRENT = 0x0B,
+ MAX77843_FG_REG_SOCMIX = 0x0D,
+ MAX77843_FG_REG_SOCAV = 0x0E,
+ MAX77843_FG_REG_REMCAP_MIX = 0x0F,
+ MAX77843_FG_REG_FULLCAP = 0x10,
+ MAX77843_FG_REG_AVG_TEMP = 0x16,
+ MAX77843_FG_REG_CYCLES = 0x17,
+ MAX77843_FG_REG_AVG_VCELL = 0x19,
+ MAX77843_FG_REG_CONFIG = 0x1D,
+ MAX77843_FG_REG_REMCAP_AV = 0x1F,
+ MAX77843_FG_REG_FULLCAP_NOM = 0x23,
+ MAX77843_FG_REG_MISCCFG = 0x2B,
+ MAX77843_FG_REG_RCOMP = 0x38,
+ MAX77843_FG_REG_FSTAT = 0x3D,
+ MAX77843_FG_REG_DQACC = 0x45,
+ MAX77843_FG_REG_DPACC = 0x46,
+ MAX77843_FG_REG_OCV = 0xEE,
+ MAX77843_FG_REG_VFOCV = 0xFB,
+ MAX77843_FG_SOCVF = 0xFF,
+
+ MAX77843_FG_END,
+};
+
+/* Muic registers */
+enum max77843_muic_reg {
+ MAX77843_MUIC_REG_ID = 0x00,
+ MAX77843_MUIC_REG_INT1 = 0x01,
+ MAX77843_MUIC_REG_INT2 = 0x02,
+ MAX77843_MUIC_REG_INT3 = 0x03,
+ MAX77843_MUIC_REG_STATUS1 = 0x04,
+ MAX77843_MUIC_REG_STATUS2 = 0x05,
+ MAX77843_MUIC_REG_STATUS3 = 0x06,
+ MAX77843_MUIC_REG_INTMASK1 = 0x07,
+ MAX77843_MUIC_REG_INTMASK2 = 0x08,
+ MAX77843_MUIC_REG_INTMASK3 = 0x09,
+ MAX77843_MUIC_REG_CDETCTRL1 = 0x0A,
+ MAX77843_MUIC_REG_CDETCTRL2 = 0x0B,
+ MAX77843_MUIC_REG_CONTROL1 = 0x0C,
+ MAX77843_MUIC_REG_CONTROL2 = 0x0D,
+ MAX77843_MUIC_REG_CONTROL3 = 0x0E,
+ MAX77843_MUIC_REG_CONTROL4 = 0x16,
+ MAX77843_MUIC_REG_HVCONTROL1 = 0x17,
+ MAX77843_MUIC_REG_HVCONTROL2 = 0x18,
+
+ MAX77843_MUIC_REG_END,
+};
+
+enum max77843_irq {
+ /* Topsys: SYSTEM */
+ MAX77843_SYS_IRQ_SYSINTSRC_SYSUVLO_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_SYSOVLO_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_TSHDN_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_TM_INT,
+
+ /* Charger: CHG_INT */
+ MAX77843_CHG_IRQ_CHG_INT_BYP_I,
+ MAX77843_CHG_IRQ_CHG_INT_BATP_I,
+ MAX77843_CHG_IRQ_CHG_INT_BAT_I,
+ MAX77843_CHG_IRQ_CHG_INT_CHG_I,
+ MAX77843_CHG_IRQ_CHG_INT_WCIN_I,
+ MAX77843_CHG_IRQ_CHG_INT_CHGIN_I,
+ MAX77843_CHG_IRQ_CHG_INT_AICL_I,
+
+ MAX77843_IRQ_NUM,
+};
+
+enum max77843_irq_muic {
+ /* MUIC: INT1 */
+ MAX77843_MUIC_IRQ_INT1_ADC,
+ MAX77843_MUIC_IRQ_INT1_ADCERROR,
+ MAX77843_MUIC_IRQ_INT1_ADC1K,
+
+ /* MUIC: INT2 */
+ MAX77843_MUIC_IRQ_INT2_CHGTYP,
+ MAX77843_MUIC_IRQ_INT2_CHGDETRUN,
+ MAX77843_MUIC_IRQ_INT2_DCDTMR,
+ MAX77843_MUIC_IRQ_INT2_DXOVP,
+ MAX77843_MUIC_IRQ_INT2_VBVOLT,
+
+ /* MUIC: INT3 */
+ MAX77843_MUIC_IRQ_INT3_VBADC,
+ MAX77843_MUIC_IRQ_INT3_VDNMON,
+ MAX77843_MUIC_IRQ_INT3_DNRES,
+ MAX77843_MUIC_IRQ_INT3_MPNACK,
+ MAX77843_MUIC_IRQ_INT3_MRXBUFOW,
+ MAX77843_MUIC_IRQ_INT3_MRXTRF,
+ MAX77843_MUIC_IRQ_INT3_MRXPERR,
+ MAX77843_MUIC_IRQ_INT3_MRXRDY,
+
+ MAX77843_MUIC_IRQ_NUM,
+};
+
+/* MAX77843 interrupts */
+#define MAX77843_SYS_IRQ_SYSUVLO_INT BIT(0)
+#define MAX77843_SYS_IRQ_SYSOVLO_INT BIT(1)
+#define MAX77843_SYS_IRQ_TSHDN_INT BIT(2)
+#define MAX77843_SYS_IRQ_TM_INT BIT(3)
+
+/* Max77843 charger insterrupts */
+#define MAX77843_CHG_BYP_I BIT(0)
+#define MAX77843_CHG_BATP_I BIT(2)
+#define MAX77843_CHG_BAT_I BIT(3)
+#define MAX77843_CHG_CHG_I BIT(4)
+#define MAX77843_CHG_WCIN_I BIT(5)
+#define MAX77843_CHG_CHGIN_I BIT(6)
+#define MAX77843_CHG_AICL_I BIT(7)
+
+/* MAX77843 CHG_INT_OK register */
+#define MAX77843_CHG_BYP_OK BIT(0)
+#define MAX77843_CHG_BATP_OK BIT(2)
+#define MAX77843_CHG_BAT_OK BIT(3)
+#define MAX77843_CHG_CHG_OK BIT(4)
+#define MAX77843_CHG_WCIN_OK BIT(5)
+#define MAX77843_CHG_CHGIN_OK BIT(6)
+#define MAX77843_CHG_AICL_OK BIT(7)
+
+/* MAX77843 CHG_DETAILS_00 register */
+#define MAX77843_CHG_BAT_DTLS BIT(0)
+
+/* MAX77843 CHG_DETAILS_01 register */
+#define MAX77843_CHG_DTLS_MASK 0x0f
+#define MAX77843_CHG_PQ_MODE 0x00
+#define MAX77843_CHG_CC_MODE 0x01
+#define MAX77843_CHG_CV_MODE 0x02
+#define MAX77843_CHG_TO_MODE 0x03
+#define MAX77843_CHG_DO_MODE 0x04
+#define MAX77843_CHG_HT_MODE 0x05
+#define MAX77843_CHG_TF_MODE 0x06
+#define MAX77843_CHG_TS_MODE 0x07
+#define MAX77843_CHG_OFF_MODE 0x08
+
+#define MAX77843_CHG_BAT_DTLS_MASK 0xf0
+#define MAX77843_CHG_NO_BAT (0x00 << 4)
+#define MAX77843_CHG_LOW_VOLT_BAT (0x01 << 4)
+#define MAX77843_CHG_LONG_BAT_TIME (0x02 << 4)
+#define MAX77843_CHG_OK_BAT (0x03 << 4)
+#define MAX77843_CHG_OK_LOW_VOLT_BAT (0x04 << 4)
+#define MAX77843_CHG_OVER_VOLT_BAT (0x05 << 4)
+#define MAX77843_CHG_OVER_CURRENT_BAT (0x06 << 4)
+
+/* MAX77843 CHG_CNFG_00 register */
+#define MAX77843_CHG_DISABLE 0x00
+#define MAX77843_CHG_ENABLE 0x05
+#define MAX77843_CHG_MASK 0x01
+#define MAX77843_CHG_BUCK_MASK 0x04
+
+/* MAX77843 CHG_CNFG_01 register */
+#define MAX77843_CHG_RESTART_THRESHOLD_100 0x00
+#define MAX77843_CHG_RESTART_THRESHOLD_150 0x10
+#define MAX77843_CHG_RESTART_THRESHOLD_200 0x20
+#define MAX77843_CHG_RESTART_THRESHOLD_DISABLE 0x30
+
+/* MAX77843 CHG_CNFG_02 register */
+#define MAX77843_CHG_FAST_CHG_CURRENT_MIN 100000
+#define MAX77843_CHG_FAST_CHG_CURRENT_MAX 3150000
+#define MAX77843_CHG_FAST_CHG_CURRENT_STEP 50000
+#define MAX77843_CHG_FAST_CHG_CURRENT_MASK 0x3f
+#define MAX77843_CHG_OTG_ILIMIT_500 (0x00 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_900 (0x01 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_1200 (0x02 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_1500 (0x03 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_MASK 0xc0
+
+/* MAX77843 CHG_CNFG_03 register */
+#define MAX77843_CHG_TOP_OFF_CURRENT_MIN 125000
+#define MAX77843_CHG_TOP_OFF_CURRENT_MAX 650000
+#define MAX77843_CHG_TOP_OFF_CURRENT_STEP 75000
+#define MAX77843_CHG_TOP_OFF_CURRENT_MASK 0x07
+
+/* MAX77843 CHG_CNFG_06 register */
+#define MAX77843_CHG_WRITE_CAP_BLOCK 0x10
+#define MAX77843_CHG_WRITE_CAP_UNBLOCK 0x0C
+
+/* MAX77843_CHG_CNFG_09_register */
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MIN 100000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MAX 4000000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_REF 3367000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_STEP 33000
+
+#define MAX77843_MUIC_ADC BIT(0)
+#define MAX77843_MUIC_ADCERROR BIT(2)
+#define MAX77843_MUIC_ADC1K BIT(3)
+
+#define MAX77843_MUIC_CHGTYP BIT(0)
+#define MAX77843_MUIC_CHGDETRUN BIT(1)
+#define MAX77843_MUIC_DCDTMR BIT(2)
+#define MAX77843_MUIC_DXOVP BIT(3)
+#define MAX77843_MUIC_VBVOLT BIT(4)
+
+#define MAX77843_MUIC_VBADC BIT(0)
+#define MAX77843_MUIC_VDNMON BIT(1)
+#define MAX77843_MUIC_DNRES BIT(2)
+#define MAX77843_MUIC_MPNACK BIT(3)
+#define MAX77843_MUIC_MRXBUFOW BIT(4)
+#define MAX77843_MUIC_MRXTRF BIT(5)
+#define MAX77843_MUIC_MRXPERR BIT(6)
+#define MAX77843_MUIC_MRXRDY BIT(7)
+
+/* MAX77843 INTSRCMASK register */
+#define MAX77843_INTSRCMASK_CHGR 0
+#define MAX77843_INTSRCMASK_SYS 1
+#define MAX77843_INTSRCMASK_FG 2
+#define MAX77843_INTSRCMASK_MUIC 3
+
+#define MAX77843_INTSRCMASK_CHGR_MASK BIT(MAX77843_INTSRCMASK_CHGR)
+#define MAX77843_INTSRCMASK_SYS_MASK BIT(MAX77843_INTSRCMASK_SYS)
+#define MAX77843_INTSRCMASK_FG_MASK BIT(MAX77843_INTSRCMASK_FG)
+#define MAX77843_INTSRCMASK_MUIC_MASK BIT(MAX77843_INTSRCMASK_MUIC)
+
+#define MAX77843_INTSRC_MASK_MASK \
+ (MAX77843_INTSRCMASK_MUIC_MASK | MAX77843_INTSRCMASK_FG_MASK | \
+ MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
+
+/* MAX77843 STATUS register*/
+#define STATUS1_ADC_SHIFT 0
+#define STATUS1_ADCERROR_SHIFT 6
+#define STATUS1_ADC1K_SHIFT 7
+#define STATUS2_CHGTYP_SHIFT 0
+#define STATUS2_CHGDETRUN_SHIFT 3
+#define STATUS2_DCDTMR_SHIFT 4
+#define STATUS2_DXOVP_SHIFT 5
+#define STATUS2_VBVOLT_SHIFT 6
+#define STATUS3_VBADC_SHIFT 0
+#define STATUS3_VDNMON_SHIFT 4
+#define STATUS3_DNRES_SHIFT 5
+#define STATUS3_MPNACK_SHIFT 6
+
+#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
+#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
+#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
+#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
+#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
+#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
+#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
+#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
+
+/* MAX77843 CONTROL register */
+#define CONTROL1_COMP1SW_SHIFT 0
+#define CONTROL1_COMP2SW_SHIFT 3
+#define CONTROL1_IDBEN_SHIFT 7
+#define CONTROL2_LOWPWR_SHIFT 0
+#define CONTROL2_ADCEN_SHIFT 1
+#define CONTROL2_CPEN_SHIFT 2
+#define CONTROL2_ACC_DET_SHIFT 5
+#define CONTROL2_USBCPINT_SHIFT 6
+#define CONTROL2_RCPS_SHIFT 7
+#define CONTROL3_JIGSET_SHIFT 0
+#define CONTROL4_ADCDBSET_SHIFT 0
+#define CONTROL4_USBAUTO_SHIFT 4
+#define CONTROL4_FCTAUTO_SHIFT 5
+#define CONTROL4_ADCMODE_SHIFT 6
+
+#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
+#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
+#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
+#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
+
+/* MAX77843 switch port */
+#define MAX77843_SIWTH_PORT \
+(MAX77843_MUIC_CONTROL1_COMP1SW_MASK | MAX77843_MUIC_CONTROL1_COMP2SW_MASK)
+
+#define MAX77843_SWITCH_OPEN \
+ (0 << CONTROL1_COMP1SW_SHIFT | 0 << CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_SWITCH_USB \
+ (1 << CONTROL1_COMP1SW_SHIFT | 1 << CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_SWITCH_AUDIO \
+ (2 << CONTROL1_COMP1SW_SHIFT | 2 << CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_SWITCH_UART \
+ (3 << CONTROL1_COMP1SW_SHIFT | 3 << CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_SWITCH_AUX_USB \
+ (4 << CONTROL1_COMP1SW_SHIFT | 4 << CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_SWITCH_AUX_UART \
+ (5 << CONTROL1_COMP1SW_SHIFT | 5 << CONTROL1_COMP2SW_SHIFT)
+
+/* MAX77843 SAFEOUT LDO Control register */
+#define SAFEOUTCTRL_SAFEOUT1_SHIFT 0
+#define SAFEOUTCTRL_SAFEOUT2_SHIFT 2
+#define SAFEOUTCTRL_ENSAFEOUT1_SHIFT 6
+#define SAFEOUTCTRL_ENSAFEOUT2_SHIFT 7
+
+#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1 \
+ BIT(SAFEOUTCTRL_ENSAFEOUT1_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2 \
+ BIT(SAFEOUTCTRL_ENSAFEOUT2_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK \
+ (0x3 << SAFEOUTCTRL_SAFEOUT1_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK \
+ (0x3 << SAFEOUTCTRL_SAFEOUT2_SHIFT)
+
+struct max77843 {
+ struct device *dev;
+
+ struct i2c_client *i2c;
+ struct i2c_client *i2c_chg;
+ struct i2c_client *i2c_fuel;
+ struct i2c_client *i2c_muic;
+
+ struct regmap *regmap;
+ struct regmap *regmap_chg;
+ struct regmap *regmap_fuel;
+ struct regmap *regmap_muic;
+
+ struct regmap_irq_chip_data *irq_data;
+ struct regmap_irq_chip_data *irq_data_chg;
+ struct regmap_irq_chip_data *irq_data_fuel;
+ struct regmap_irq_chip_data *irq_data_muic;
+
+ int irq;
+};
+#endif /* __MAX77843_H__ */

Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/