Re: [PATCH v6 1/2] arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile
From: Lyra Zhang
Date: Fri Jan 23 2015 - 06:13:41 EST
On Fri, Jan 23, 2015 at 6:36 PM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> On Fri, Jan 23, 2015 at 10:21:30AM +0000, Chunyan Zhang wrote:
>> From: Zhizhou Zhang <zhizhou.zhang@xxxxxxxxxxxxxx>
>>
>> Adds the device tree support for Spreadtrum SC9836 SoC which is based on
>> Sharkl64 platform.
>>
>> Sharkl64 platform contains the common nodes of Spreadtrum's arm64-based SoCs.
>>
>> Signed-off-by: Zhizhou Zhang <zhizhou.zhang@xxxxxxxxxxxxxx>
>> Signed-off-by: Orson Zhai <orson.zhai@xxxxxxxxxxxxxx>
>> Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/Makefile | 1 +
>> arch/arm64/boot/dts/sprd/Makefile | 5 ++
>> arch/arm64/boot/dts/sprd/sc9836-openphone.dts | 49 ++++++++++++++++
>> arch/arm64/boot/dts/sprd/sc9836.dtsi | 74 +++++++++++++++++++++++++
>> arch/arm64/boot/dts/sprd/sharkl64.dtsi | 65 ++++++++++++++++++++++
>> 5 files changed, 194 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/sprd/Makefile
>> create mode 100644 arch/arm64/boot/dts/sprd/sc9836-openphone.dts
>> create mode 100644 arch/arm64/boot/dts/sprd/sc9836.dtsi
>> create mode 100644 arch/arm64/boot/dts/sprd/sharkl64.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
>> index 3b8d427..806a717 100644
>> --- a/arch/arm64/boot/dts/Makefile
>> +++ b/arch/arm64/boot/dts/Makefile
>> @@ -2,6 +2,7 @@ dts-dirs += amd
>> dts-dirs += apm
>> dts-dirs += arm
>> dts-dirs += cavium
>> +dts-dirs += sprd
>>
>> always := $(dtb-y)
>> subdir-y := $(dts-dirs)
>> diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
>> new file mode 100644
>> index 0000000..b658c5e
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/sprd/Makefile
>> @@ -0,0 +1,5 @@
>> +dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb
>> +
>> +always := $(dtb-y)
>> +subdir-y := $(dts-dirs)
>> +clean-files := *.dtb
>> diff --git a/arch/arm64/boot/dts/sprd/sc9836-openphone.dts b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
>> new file mode 100644
>> index 0000000..b8a69b2
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
>> @@ -0,0 +1,49 @@
>> +/*
>> + * Spreadtrum SC9836 openphone board DTS file
>> + *
>> + * Copyright (C) 2014, Spreadtrum Communications Inc.
>> + *
>> + * This file is licensed under a dual GPLv2 or X11 license.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "sc9836.dtsi"
>> +
>> +/ {
>> + model = "Spreadtrum SC9836 Openphone Board";
>> +
>> + compatible = "sprd,sc9836-openphone", "sprd,sc9836";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + serial1 = &uart1;
>> + serial2 = &uart2;
>> + serial3 = &uart3;
>> + };
>> +
>> + memory@80000000 {
>> + device_type = "memory";
>> + reg = <0 0x80000000 0 0x20000000>;
>> + };
>> +
>> + chosen {
>> + stdout-path = &uart0;
>> + };
>
> It would be good to use an explicit configuration here. e.g. have:
>
> chosen {
> stdout-path = "serial0:115200n8";
> };
>
> Where '115200n8' is replaced by whatever the bootloader leaves the UART
> configured as on this board.
>
> That means you won't need a 'console=' to get nice consistent serial
> output at boot, and won't be relying on implicit defaults all over the
> place.
>
ok, I've changed and tested pass.
>> +};
>> +
>> +&uart0 {
>> + status = "okay";
>> +};
>> +
>> +&uart1 {
>> + status = "okay";
>> +};
>> +
>> +&uart2 {
>> + status = "okay";
>> +};
>> +
>> +&uart3 {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
>> new file mode 100644
>> index 0000000..c646123
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
>> @@ -0,0 +1,74 @@
>> +/*
>> + * Spreadtrum SC9836 SoC DTS file
>> + *
>> + * Copyright (C) 2014, Spreadtrum Communications Inc.
>> + *
>> + * This file is licensed under a dual GPLv2 or X11 license.
>> + */
>> +
>> +#include "sharkl64.dtsi"
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + compatible = "sprd,sc9836";
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53", "arm,armv8";
>> + reg = <0x0 0x0>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53", "arm,armv8";
>> + reg = <0x0 0x1>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53", "arm,armv8";
>> + reg = <0x0 0x2>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53", "arm,armv8";
>> + reg = <0x0 0x3>;
>> + enable-method = "psci";
>> + };
>> + };
>> +
>> + gic: interrupt-controller@12001000 {
>> + compatible = "arm,gic-400";
>> + reg = <0 0x12001000 0 0x1000>,
>> + <0 0x12002000 0 0x2000>,
>> + <0 0x12004000 0 0x2000>,
>> + <0 0x12006000 0 0x2000>;
>> + #interrupt-cells = <3>;
>> + interrupt-controller;
>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci";
>> + method = "smc";
>> + cpu_on = <0xc4000003>;
>> + cpu_off = <0x84000002>;
>> + cpu_suspend = <0xc4000001>;
>> + };
>
> Given that there are no suspend states in this dts, the cpu_suspend
> property here could be omitted for now (though I guess it doesn't matter
> either way).
>
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/sprd/sharkl64.dtsi b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
>> new file mode 100644
>> index 0000000..6b4bdc5
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
>> @@ -0,0 +1,65 @@
>> +/*
>> + * Spreadtrum Sharkl64 platform DTS file
>> + *
>> + * Copyright (C) 2014, Spreadtrum Communications Inc.
>> + *
>> + * This file is licensed under a dual GPLv2 or X11 license.
>> + */
>> +
>> +/ {
>> + interrupt-parent = <&gic>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + soc {
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + ap-apb {
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + uart0: serial@70000000 {
>> + compatible = "sprd,sc9836-uart";
>> + reg = <0 0x70000000 0 0x100>;
>> + interrupts = <0 2 0xf04>;
>> + clocks = <&clk26mhz>;
>> + status = "disabled";
>> + };
>> +
>> + uart1: serial@70100000 {
>> + compatible = "sprd,sc9836-uart";
>> + reg = <0 0x70100000 0 0x100>;
>> + interrupts = <0 3 0xf04>;
>> + clocks = <&clk26mhz>;
>> + status = "disabled";
>> + };
>> +
>> + uart2: serial@70200000 {
>> + compatible = "sprd,sc9836-uart";
>> + reg = <0 0x70200000 0 0x100>;
>> + interrupts = <0 2 0xf04>;
>> + clocks = <&clk26mhz>;
>> + status = "disabled";
>> + };
>> +
>> + uart3: serial@70300000 {
>> + compatible = "sprd,sc9836-uart";
>> + reg = <0 0x70300000 0 0x100>;
>> + interrupts = <0 3 0xf04>;
>> + clocks = <&clk26mhz>;
>> + status = "disabled";
>> + };
>> + };
>> + };
>> +
>> + clk26mhz: clk26mhz {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <26000000>;
>> + };
>> +};
>
> Other than my comments above, this looks fine to me. I assume the UART
> binding and driver are already queued somewhere else?
>
Since the last version patch series must be split for applying.
I'll send the UART bindings with UART driver soon.
For this case, can I still add your Acked-by and send these two patch
to Greg right now?
Thanks a lot,
Chunyan
> If so:
>
> Acked-by: Mark Rutland <mark.rutland@xxxxxxx>
>
> Thanks,
> Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/