[PATCH v3] usb: Retry port status check on resume to work around RH bugs

[Julius Werner]

The EHCI controller on the RK3288 SoC is violating basic parts of the
USB spec and thereby unable to properly resume a suspended port. It does
not start SOF generation within 3ms of finishing resume signaling, so
the attached device will drop of the bus again. This is a particular
problem with runtime PM, where accessing the device will trigger a
resume that immediately makes it unavailable (and reenumerate with a new
handle).

Thankfully, the persist feature is generally able to work around stuff
like that. Unfortunately, it doesn't quite work in this particular case
because the controller will turn off the CurrentConnectStatus bit for an
instant while the device is reconnecting, which causes the kernel to
conclude that it permanently disappeared. This patch adds a tiny retry
mechanism to the core port resume code which will catch this case and
shouldn't have any notable impact on other controllers.

Signed-off-by: Julius Werner <jwerner@xxxxxxxxxxxx>
---
 drivers/usb/core/hub.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index aeb50bb..26bdd96 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2896,10 +2896,12 @@ static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
  */
 static int check_port_resume_type(struct usb_device *udev,
 		struct usb_hub *hub, int port1,
-		int status, unsigned portchange, unsigned portstatus)
+		int status, u16 portchange, u16 portstatus)
 {
 	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int retries = 3;
 
+ retry:
 	/* Is a warm reset needed to recover the connection? */
 	if (status == 0 && udev->reset_resume
 		&& hub_port_warm_reset_required(hub, port1, portstatus)) {
@@ -2907,10 +2909,17 @@ static int check_port_resume_type(struct usb_device *udev,
 	}
 	/* Is the device still present? */
 	else if (status || port_is_suspended(hub, portstatus) ||
-			!port_is_power_on(hub, portstatus) ||
-			!(portstatus & USB_PORT_STAT_CONNECTION)) {
+			!port_is_power_on(hub, portstatus)) {
 		if (status >= 0)
 			status = -ENODEV;
+	} else if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
+		if (retries--) {
+			usleep_range(200, 300);
+			status = hub_port_status(hub, port1, &portstatus,
+							     &portchange);
+			goto retry;
+		}
+		status = -ENODEV;
 	}
 
 	/* Can't do a normal resume if the port isn't enabled,
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/