[PATCH] mmc: sdhci: switch voltage before sdhci_set_ios in runtime resume

[Jisheng Zhang]

I observed the Host Control2 register isn't correctly restored
after runtime resuming on BG2Q. For example, the register reads
as 0x800c before runtime suspend, but it's set as 0x8004 after runtime
resuming. This could results in a non working host.

The reason is the Host Control2 is incorrectly reset when switching
voltage. We fix this by following the same sequence during initialization.

Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>
---
 drivers/mmc/host/sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c9881ca..0ad412a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2871,9 +2871,9 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
 	/* Force clock and power re-program */
 	host->pwr = 0;
 	host->clock = 0;
+	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
 	sdhci_do_set_ios(host, &host->mmc->ios);
 
-	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
 	if ((host_flags & SDHCI_PV_ENABLED) &&
 		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
 		spin_lock_irqsave(&host->lock, flags);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/