Re: [rcu] [ INFO: suspicious RCU usage. ]

From: Krzysztof Kozlowski
Date: Wed Feb 04 2015 - 11:11:05 EST


On Åro, 2015-02-04 at 07:56 -0800, Paul E. McKenney wrote:
> On Wed, Feb 04, 2015 at 04:22:28PM +0100, Krzysztof Kozlowski wrote:
> >
> > Actually the timeout versions but I think that doesn't matter.
> > The wait_on_bit will busy-loop with testing for the bit. Inside the loop
> > it calls the 'action' which in my case will be bit_wait_io_timeout().
> > This calls schedule_timeout().
>
> Ah, good point.
>
> > See proof of concept in attachment. One observed issue: hot unplug from
> > commandline takes a lot more time. About 7 seconds instead of ~0.5.
> > Probably I did something wrong.
>
> Well, you do set the timeout to five seconds, and so if the condition
> does not get set before the surviving CPU finds its way to the
> out_of_line_wait_on_bit_timeout(), you are guaranteed to wait for at
> least five seconds.
>
> One alternative approach would be to have a loop around a series of
> shorter waits. Other thoughts?

Right! That was the issue. It seems it works. I'll think also on
self-adapting interval as you said below. I'll test it more and send a
patch.

Best regards,
Krzysztof

>
> > > You know, this situation is giving me a bad case of nostalgia for the
> > > old Sequent Symmetry and NUMA-Q hardware. On those platforms, the
> > > outgoing CPU could turn itself off, and thus didn't need to tell some
> > > other CPU when it was ready to be turned off. Seems to me that this
> > > self-turn-off capability would be a great feature for future systems!
> >
> > There are a lot more issues with hotplug on ARM...
>
> Just trying to clean up this particular corner at the moment. ;-)
>
> > Patch/RFC attached.
>
> Again, I believe that you will need to loop over a shorter timeout
> in order to get reasonable latencies. If waiting a millisecond at
> a time is an energy-efficiency concern (don't know why it would be
> in this rare case, but...), then one approach would be to start
> with very short waits, then increase the wait time, for example,
> doubling the wait time on each pass through the loop would result
> in a smallish number of wakeups, but would mean that you waited
> no more than twice as long as necessary.
>
> Thoughts?


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/